ดอกกัดร่องตัว T โซลิดคาร์ไบด์ 4 ฟัน ซีรีส์ HRC55 สำหรับเหล็กและอลูมิเนียม
N Aluminum AlloysP Carbon SteelP Alloy Steel
ออกแบบ 4 ร่อง
การตัดที่มั่นคง
Fine Thickness
0.1 mm Steps
Reduced Neck
Less Interference
Custom Sizes
OEM Options
HRC55 4-Flute Solid Carbide T-Slot Cutter for Steel & Aluminum
นี่ 4-flute solid carbide T-slot cutter
is designed for T-slots, side grooves and recessed profiles that conventional square end mills cannot reach directly.
Ultra-fine carbide and a nano composite coating support wear resistance. Select the head size, neck clearance and coating according to the slot geometry and workpiece material.
Typical applications:
precision components, mold parts and fixtures.
Material, Coating & Cutting Edge
Ultra-Fine Carbide
0.4 μm carbide substrate supports cutting-edge strength and wear resistance.
Nano Composite Coating
Supports heat and wear resistance. Confirm the coating for the selected workpiece.
Ground Cutting Edges
Sharp cutting edges support controlled side cutting and groove finishing.
Designed for Recessed Slot Access
Reach Behind Slot Walls
The enlarged cutting head accesses recessed grooves after a suitable entry slot or opening has been prepared.
Match the Neck Clearance
Choose the neck diameter and reach to clear the slot opening and reduce the risk of rubbing against the workpiece.
Four Cutting Edges
Four flutes provide repeated cutting engagement for side-slot milling and recessed profile machining.
Drawing-Based Customization
Head diameter, cutting width, neck, shank and overall length can be reviewed against your drawing.
Machining Applications
Side Groove Milling
Recessed Profiles
Accessible Undercuts
ความเข้ากันได้ของวัสดุชิ้นงาน
Confirm material grade, hardness and coating before selecting the cutter.
| MATERIAL | APPLICATION | SELECTION NOTE |
|---|---|---|
| Carbon Steel | T-slots and side grooves | Match geometry to slot dimensions |
| Alloy Steel | Recessed grooves and profiles | Confirm grade and hardness |
| Aluminum & Aluminum Alloys | Side grooves and recessed features | Confirm aluminum-suitable coating and chip clearance |
| Mold & Tool Steel | Mold grooves and recessed details | Review hardness, reach and engagement |
| Hardened Steel up to Approx. HRC55 | Application-dependent slot machining | Confirm suitability for the selected size and setup |
เหมาะที่สุดสำหรับ
T-slots, side grooves and recessed features with sufficient entry access and neck clearance.
ไม่เหมาะสำหรับ
Direct plunging into solid material or enclosed features without a suitable cutter entry path.
Application tips:
prepare entry clearance, keep tool overhang short and maintain chip removal from recessed slots.
รายละเอียดผลิตภัณฑ์
Solid Carbide T-Slot Cutter Dimensions
Dimensional reference for the 4-flute solid carbide T-slot cutter, showing cutting-head thickness, reduced-neck clearance, shank diameter and overall length.
Technical Specifications
| ประเภทเครื่องมือ | T-Slot Cutter / Undercut Milling Cutter |
| Material / Flutes | Solid Carbide / 4 Flutes |
| เส้นผ่านศูนย์กลางการตัด | Ø3–Ø16 mm |
| Cutting Thickness T | 0.5–12 mm, size-dependent |
| Fine Thickness Steps | 0.1 mm within selected ranges |
| Neck Diameter | Ø1.5–Ø8 mm |
| Neck Length | 5–25 mm |
| ความยาวรวม | 50 / 60 / 75 mm |
| การใช้งาน | T-Slot Milling / Undercutting / Groove Profiling |
ขนาดและมิติมาตรฐาน
Reference sizes covering Ø3–Ø16 mm cutting diameters with 0.1 mm thickness increments in selected ranges. All dimensions are in mm.
| Cutting Dia. | Thickness T (mm) | Neck Dia. | Neck Length | Shank Dia. | OAL |
|---|---|---|---|---|---|
| Ø3 | 0.5–3.0 (0.1 steps) | 1.5 | 5 | 4 | 50 |
| Ø4 | 0.5–4.0 (0.1 steps); 4.5, 5 | 2 | 6 | 4 | 50 |
| Ø6 | 0.5–4.0 (0.1 steps); 4.5, 5, 6 | 3 | 9 | 6 | 50 |
| Ø8 | 0.5–4.0 (0.1 steps); 4.5, 5, 6, 8 | 4 | 12 | 8 | 50 |
| Ø10 | 0.5–4.0 (0.1 steps); 4.5–8.0 (0.5 steps); 10 | 5 | 15 | 10 | 60 |
| Ø12 | 0.5–4.0 (0.1 steps); 4.5–8.0 (0.5 steps); 10, 12 | 6 | 18 | 12 | 60 |
| Ø14 | 2, 5, 8 | 7 | 25 | 14 | 75 |
| Ø16 | 2, 5, 8 | 8 | 25 | 16 | 75 |
Thickness Note: Cutting thickness increases in 0.1 mm steps within the specified fine-size ranges. Larger thicknesses use 0.5 mm increments or individually listed sizes. All configurations have 4 flutes.
Selection Note: Confirm cutting-head thickness, neck clearance, workpiece material and coating before ordering. Custom dimensions are available upon review.
Solid Carbide T-Slot Cutter Customization
ตามสั่ง cutting diameters, head thickness, neck diameters, neck lengths, shank sizes, overall lengths and coatings are available for steel and aluminum applications, with 0.1 mm thickness increments in selected ranges.
คุณภาพ การตรวจสอบ และการส่งมอบ
ของเรา 4-flute solid carbide T-slot cutters undergo checks for cutting diameter, head thickness, neck dimensions, cutting-edge quality and coating condition before protective packaging and shipment.
Solid Carbide T-Slot Cutter FAQs
Answers to common questions about T-slot milling, cutting thickness, neck clearance and material selection for steel and aluminum.
What is a solid carbide T-slot cutter used for?
Does T-slot milling require a pre-machined slot?
Are 0.1 mm cutting thickness increments available?
How do I choose the cutting diameter and slot thickness?
Why are neck diameter and neck length important?
Which steel and aluminum grades can be machined?
Which coating is suitable for steel or aluminum T-slot milling?
Can this HRC55 T-slot cutter machine hardened steel?
Customization & Ordering FAQs
Common purchasing questions about custom dimensions, trial orders, replacement tools and OEM supply.
Can T-slot cutters be customized from drawings or samples?
What are the MOQ and lead time for custom T-slot cutters?
มีบริการพิมพ์โลโก้ OEM และบรรจุภัณฑ์แบรนด์ส่วนตัวหรือไม่?
What information is needed to quote a custom T-slot cutter?
ต้องการทราบขนาด ราคา หรือตัวเลือกการปรับแต่งตามความต้องการหรือไม่?
ส่งรายละเอียดและจำนวนที่ต้องการเพื่อรับใบเสนอราคา.
- ขนาดมาตรฐาน
- คำสั่งซื้อทดลองในปริมาณน้อย
- ขนาดผสม
- OEM และตามสั่ง
ดูรหัส QR – ติดต่อฝ่ายขายผ่าน WeChat
สแกนเพื่อติดต่อเราผ่าน WeChat.
สแกนเพื่อติดต่อเราผ่าน WeChat.
