HRC55 4날 솔리드 카바이드 T-슬롯 커터 (강철 및 알루미늄용)
N Aluminum AlloysP 탄소강P 합금강
4-Flute Design
안정적인 절단
Fine Thickness
0.1 mm Steps
Reduced Neck
Less Interference
맞춤형 크기
OEM Options
HRC55 4-Flute Solid Carbide T-Slot Cutter for Steel & Aluminum
이 4-flute solid carbide T-slot cutter
is designed for T-slots, side grooves and recessed profiles that conventional square end mills cannot reach directly.
Ultra-fine carbide and a nano composite coating support wear resistance. Select the head size, neck clearance and coating according to the slot geometry and workpiece material.
일반적인 애플리케이션:
precision components, mold parts and fixtures.
Material, Coating & Cutting Edge
Ultra-Fine Carbide
0.4 μm carbide substrate supports cutting-edge strength and wear resistance.
Nano Composite Coating
Supports heat and wear resistance. Confirm the coating for the selected workpiece.
Ground Cutting Edges
Sharp cutting edges support controlled side cutting and groove finishing.
Designed for Recessed Slot Access
Reach Behind Slot Walls
The enlarged cutting head accesses recessed grooves after a suitable entry slot or opening has been prepared.
Match the Neck Clearance
Choose the neck diameter and reach to clear the slot opening and reduce the risk of rubbing against the workpiece.
Four Cutting Edges
Four flutes provide repeated cutting engagement for side-slot milling and recessed profile machining.
Drawing-Based Customization
Head diameter, cutting width, neck, shank and overall length can be reviewed against your drawing.
Machining Applications
Side Groove Milling
Recessed Profiles
Accessible Undercuts
가공물 재료 호환성
Confirm material grade, hardness and coating before selecting the cutter.
| 재료 | 신청서 | 선정 참고 사항 |
|---|---|---|
| 탄소강 | T-slots and side grooves | Match geometry to slot dimensions |
| 합금강 | Recessed grooves and profiles | 등급 및 경도 확인 |
| 알루미늄 및 알루미늄 합금 | Side grooves and recessed features | Confirm aluminum-suitable coating and chip clearance |
| Mold & Tool Steel | Mold grooves and recessed details | Review hardness, reach and engagement |
| Hardened Steel up to Approx. HRC55 | Application-dependent slot machining | Confirm suitability for the selected size and setup |
최상의 대상
T-slots, side grooves and recessed features with sufficient entry access and neck clearance.
다음과 같은 경우에는 적합하지 않습니다
Direct plunging into solid material or enclosed features without a suitable cutter entry path.
Application tips:
prepare entry clearance, keep tool overhang short and maintain chip removal from recessed slots.
제품 상세 정보
Solid Carbide T-Slot Cutter Dimensions
Dimensional reference for the 4-flute solid carbide T-slot cutter, showing cutting-head thickness, reduced-neck clearance, shank diameter and overall length.
기술 사양
| 도구 유형 | T-Slot Cutter / Undercut Milling Cutter |
| Material / Flutes | Solid Carbide / 4 Flutes |
| 절단 직경 | Ø3–Ø16 mm |
| Cutting Thickness T | 0.5–12 mm, size-dependent |
| Fine Thickness Steps | 0.1 mm within selected ranges |
| Neck Diameter | Ø1.5–Ø8 mm |
| Neck Length | 5–25 mm |
| 전체 길이 | 50 / 60 / 75 mm |
| 애플리케이션 | T-Slot Milling / Undercutting / Groove Profiling |
Standard Sizes & Dimensions
Reference sizes covering Ø3–Ø16 mm cutting diameters with 0.1 mm thickness increments in selected ranges. All dimensions are in mm.
| 절단 직경. | Thickness T (mm) | Neck Dia. | Neck Length | Shank Dia. | OAL |
|---|---|---|---|---|---|
| Ø3 | 0.5–3.0 (0.1 steps) | 1.5 | 5 | 4 | 50 |
| Ø4 | 0.5–4.0 (0.1 steps); 4.5, 5 | 2 | 6 | 4 | 50 |
| Ø6 | 0.5–4.0 (0.1 steps); 4.5, 5, 6 | 3 | 9 | 6 | 50 |
| Ø8 | 0.5–4.0 (0.1 steps); 4.5, 5, 6, 8 | 4 | 12 | 8 | 50 |
| Ø10 | 0.5–4.0 (0.1 steps); 4.5–8.0 (0.5 steps); 10 | 5 | 15 | 10 | 60 |
| Ø12 | 0.5–4.0 (0.1 steps); 4.5–8.0 (0.5 steps); 10, 12 | 6 | 18 | 12 | 60 |
| Ø14 | 2, 5, 8 | 7 | 25 | 14 | 75 |
| Ø16 | 2, 5, 8 | 8 | 25 | 16 | 75 |
Thickness Note: Cutting thickness increases in 0.1 mm steps within the specified fine-size ranges. Larger thicknesses use 0.5 mm increments or individually listed sizes. All configurations have 4 flutes.
선정 참고 사항: Confirm cutting-head thickness, neck clearance, workpiece material and coating before ordering. Custom dimensions are available upon review.
Solid Carbide T-Slot Cutter Customization
사용자 지정 cutting diameters, head thickness, neck diameters, neck lengths, shank sizes, overall lengths and coatings are available for steel and aluminum applications, with 0.1 mm thickness increments in selected ranges.
품질, 검사 및 납품
우리의 4-flute solid carbide T-slot cutters undergo checks for cutting diameter, head thickness, neck dimensions, cutting-edge quality and coating condition before protective packaging and shipment.
Solid Carbide T-Slot Cutter FAQs
Answers to common questions about T-slot milling, cutting thickness, neck clearance and material selection for steel and aluminum.
What is a solid carbide T-slot cutter used for?
Does T-slot milling require a pre-machined slot?
Are 0.1 mm cutting thickness increments available?
How do I choose the cutting diameter and slot thickness?
Why are neck diameter and neck length important?
Which steel and aluminum grades can be machined?
Which coating is suitable for steel or aluminum T-slot milling?
Can this HRC55 T-slot cutter machine hardened steel?
맞춤 제작 및 주문 관련 자주 묻는 질문
Common purchasing questions about custom dimensions, trial orders, replacement tools and OEM supply.
Can T-slot cutters be customized from drawings or samples?
What are the MOQ and lead time for custom T-slot cutters?
Are OEM marking and private-label packaging available?
What information is needed to quote a custom T-slot cutter?
사이즈, 가격 또는 맞춤 제작 옵션이 필요하신가요?
견적 요청을 위해 사양과 수량을 보내주십시오.
- 표준 크기
- 소액 재판 명령
- 다양한 사이즈
- OEM 및 맞춤형 제작
QR 코드 보기 – 위챗으로 영업팀에 문의하기
위챗으로 문의하시려면 QR 코드를 스캔하세요.
위챗
위챗으로 문의하시려면 QR 코드를 스캔하세요.
