قاطع HRC55 ذو 4 شفرات من الكربيد الصلب للفتحات على شكل حرف T، مخصص للفولاذ والألومنيوم

PRECISION T-SLOT MILLING FOR STEEL & ALUMINUM
4-flute solid carbide T-slot cutters with fine thickness options and reduced-neck clearance for precise slotting and undercut milling.
المزامير:4
Slot Height:0.5–12 mm
قطر القطع:Ø3–16 مم
الطول الإجمالي:50 / 60 / 75 mm
طلاء:TiSiN/Uncoated
الحد الأدنى للطلب:3-10 قطع/حجم
التطبيق / المادة

N سبائك الألومنيومP الفولاذ الكربونيالفولاذ السبائكي P

احصل على عرض أسعار الدردشة عبر واتساب
الأفضل لـ

تصميم بأربع شفرات

القطع المستقر

Fine Thickness

0.1 mm Steps

Reduced Neck

Less Interference

الأحجام المخصصة

OEM Options

T-Slot End Mill · Solid Carbide · HRC55

HRC55 4-Flute Solid Carbide T-Slot Cutter for Steel & Aluminum

هذا 4-flute solid carbide T-slot cutter
is designed for T-slots, side grooves and recessed profiles that conventional square end mills cannot reach directly.

Ultra-fine carbide and a nano composite coating support wear resistance. Select the head size, neck clearance and coating according to the slot geometry and workpiece material.

التطبيقات النموذجية:
precision components, mold parts and fixtures.

Material, Coating & Cutting Edge

High wear resistance solid carbide T-slot cutter

كربيد فائق النعومة

0.4 μm carbide substrate supports cutting-edge strength and wear resistance.

Nano composite coating on T-slot cutter

Nano Composite Coating

Supports heat and wear resistance. Confirm the coating for the selected workpiece.

T-slot cutter cutting-edge detail

Ground Cutting Edges

Sharp cutting edges support controlled side cutting and groove finishing.

Designed for Recessed Slot Access

Reach Behind Slot Walls

The enlarged cutting head accesses recessed grooves after a suitable entry slot or opening has been prepared.

Match the Neck Clearance

Choose the neck diameter and reach to clear the slot opening and reduce the risk of rubbing against the workpiece.

أربع حواف قطع

Four flutes provide repeated cutting engagement for side-slot milling and recessed profile machining.

التخصيص القائم على الرسومات

Head diameter, cutting width, neck, shank and overall length can be reviewed against your drawing.

تطبيقات التصنيع الآلي

T-Slot Milling
Side Groove Milling
Recessed Profiles
Accessible Undercuts

توافق مواد قطع العمل

hss taps application materials

Confirm material grade, hardness and coating before selecting the cutter.

MATERIAL التطبيق SELECTION NOTE
الفولاذ الكربوني T-slots and side grooves Match geometry to slot dimensions
سبائك الصلب Recessed grooves and profiles تأكيد الدرجة والصلابة
الألومنيوم وسبائك الألومنيوم Side grooves and recessed features Confirm aluminum-suitable coating and chip clearance
Mold & Tool Steel Mold grooves and recessed details Review hardness, reach and engagement
Hardened Steel up to Approx. HRC55 Application-dependent slot machining Confirm suitability for the selected size and setup

الأفضل لـ

T-slots, side grooves and recessed features with sufficient entry access and neck clearance.

ليس مناسبًا لـ

Direct plunging into solid material or enclosed features without a suitable cutter entry path.

Application tips:
prepare entry clearance, keep tool overhang short and maintain chip removal from recessed slots.

تفاصيل المنتج

Solid carbide T-slot end mill product image 5
Solid carbide T-slot end mill product image 4
Solid carbide T-slot end mill product image 2
Solid carbide T-slot end mill product image 1
Solid carbide T-slot end mill product image 6

Solid Carbide T-Slot Cutter Dimensions

Dimensional reference for the 4-flute solid carbide T-slot cutter, showing cutting-head thickness, reduced-neck clearance, shank diameter and overall length.

Solid carbide T-slot cutter dimension diagram showing cutting diameter, head thickness, neck diameter, neck length, shank diameter and overall length

المواصفات الفنية

نوع الأداة T-Slot Cutter / Undercut Milling Cutter
Material / Flutes Solid Carbide / 4 Flutes
قطر القطع Ø3–Ø16 mm
Cutting Thickness T 0.5–12 mm, size-dependent
Fine Thickness Steps 0.1 mm within selected ranges
Neck Diameter Ø1.5–Ø8 mm
Neck Length 5–25 mm
الطول الإجمالي 50 / 60 / 75 mm
التطبيقات T-Slot Milling / Undercutting / Groove Profiling

الأحجام والأبعاد القياسية

Reference sizes covering Ø3–Ø16 mm cutting diameters with 0.1 mm thickness increments in selected ranges. All dimensions are in mm.

قطر القطع. Thickness T (mm) Neck Dia. Neck Length ضياء الساق. OAL
Ø3 0.5–3.0 (0.1 steps) 1.5 5 4 50
Ø4 0.5–4.0 (0.1 steps); 4.5, 5 2 6 4 50
Ø6 0.5–4.0 (0.1 steps); 4.5, 5, 6 3 9 6 50
Ø8 0.5–4.0 (0.1 steps); 4.5, 5, 6, 8 4 12 8 50
Ø10 0.5–4.0 (0.1 steps); 4.5–8.0 (0.5 steps); 10 5 15 10 60
Ø12 0.5–4.0 (0.1 steps); 4.5–8.0 (0.5 steps); 10, 12 6 18 12 60
Ø14 2, 5, 8 7 25 14 75
Ø16 2, 5, 8 8 25 16 75

Thickness Note: Cutting thickness increases in 0.1 mm steps within the specified fine-size ranges. Larger thicknesses use 0.5 mm increments or individually listed sizes. All configurations have 4 flutes.

ملاحظة بشأن الاختيار: Confirm cutting-head thickness, neck clearance, workpiece material and coating before ordering. Custom dimensions are available upon review.

Solid Carbide T-Slot Cutter Customization

مخصص cutting diameters, head thickness, neck diameters, neck lengths, shank sizes, overall lengths and coatings are available for steel and aluminum applications, with 0.1 mm thickness increments in selected ranges.

t slot cutter end mill hy cutting tools

الجودة والتفتيش والتسليم

لدينا 4-flute solid carbide T-slot cutters undergo checks for cutting diameter, head thickness, neck dimensions, cutting-edge quality and coating condition before protective packaging and shipment.Quality inspection of solid carbide T-slot cuttersProtective packaging for solid carbide T-slot cutters

Solid Carbide T-Slot Cutter FAQs

Answers to common questions about T-slot milling, cutting thickness, neck clearance and material selection for steel and aluminum.

What is a solid carbide T-slot cutter used for?
A solid carbide T-slot cutter is used for T-slot milling, recessed side grooves and undercut features that conventional end mills cannot easily reach. Its cutting head and reduced-neck geometry support side-profile machining.
Does T-slot milling require a pre-machined slot?
Usually, yes. A pre-machined entry slot must provide sufficient clearance for the cutter head. Check the entry path, groove dimensions and neck clearance before machining.
Are 0.1 mm cutting thickness increments available?
Yes. Selected sizes offer 0.1 mm thickness increments, including the 0.5–4.0 mm range on specified diameters. Larger thicknesses are available in 0.5 mm steps or individually listed sizes. Check the size table for available combinations.
How do I choose the cutting diameter and slot thickness?
حدد cutting diameter according to the required T-slot width and available clearance. Match the head thickness to the slot height. Reference sizes cover Ø3–Ø16 mm, with thickness options varying by diameter.
Why are neck diameter and neck length important?
إن reduced-neck design helps prevent interference with slot walls and adjacent shoulders. Neck diameter and length must provide sufficient clearance without excessive tool overhang or deflection.
Which steel and aluminum grades can be machined?
يمكن مراجعة التكوينات الخاصة بالمواد من أجل 1018, 1045 and 4140 steel, as well as 6061, 6082 and 7075 aluminum alloys. Cutting geometry and coating should match the selected grade and machining conditions.
Which coating is suitable for steel or aluminum T-slot milling?
TiSiN or AlTiN options can be reviewed for steel, while DLC or uncoated configurations may be suitable for aluminum. Coating availability and cutting geometry must be confirmed by size and material.
Can this HRC55 T-slot cutter machine hardened steel?
The HRC55 designation refers to the steel-machining series. Suitability near 55 HRC depends on the actual steel grade, cutting geometry, coating and engagement. Confirm the application before production.

الأسئلة الشائعة حول التخصيص والطلبات

Common purchasing questions about custom dimensions, trial orders, replacement tools and OEM supply.

Can T-slot cutters be customized from drawings or samples?
نعم. حسب الطلب cutting diameters, head thicknesses, neck dimensions, shank sizes, overall lengths and coatings can be reviewed from drawings or existing cutter samples.
What are the MOQ and lead time for custom T-slot cutters?
Small trial orders are supported. MOQ varies by configuration, often around 3–10 pieces per size. Standard-complexity custom tools typically take around 7 days; special geometries and coatings require confirmation.
هل تتوفر خدمة وضع العلامات الخاصة بالمصنعين الأصليين (OEM) والتعبئة والتغليف بعلامات تجارية خاصة؟
نعم. Laser marking, custom tool codes, private labels and packaging وهي متاحة للموزعين ولطلبات الشركات المصنعة للمعدات الأصلية.
What information is needed to quote a custom T-slot cutter?
يرجى تقديم cutting diameter, head thickness, neck diameter, neck length, shank size, workpiece material and quantity. Include a drawing or existing tool sample for non-standard specifications.

هل تحتاج إلى معلومات عن المقاسات أو الأسعار أو الخيارات المخصصة؟

يرجى إرسال المواصفات والكمية المطلوبة للحصول على عرض أسعار.

  • الأحجام القياسية
  • طلبات تجريبية صغيرة
  • أحجام متنوعة
  • التصنيع حسب الطلب (OEM) والمنتجات المخصصة
عرض رمز الاستجابة السريعة – اتصل بقسم المبيعات عبر تطبيق WeChat
رمز QR لـ «HY Cutting Tools» على WeChat

امسح الرمز ضوئيًا للتواصل معنا عبر تطبيق WeChat.

استفسار عن منتجات HY

ويشات

رمز QR لـ «HY Cutting Tools» على WeChat

امسح الرمز ضوئيًا للتواصل معنا عبر تطبيق WeChat.

المنتجات ذات الصلة