Fresa para ranuras en T de metal duro de 4 filos HRC55 para acero y aluminio

PRECISION T-SLOT MILLING FOR STEEL & ALUMINUM
4-flute solid carbide T-slot cutters with fine thickness options and reduced-neck clearance for precise slotting and undercut milling.
Número de filos4
Slot Height:0.5–12 mm
Diámetro de corte:Ø3–16 mm
Longitud total:50 / 60 / 75 mm
Recubrimiento:TiSiN/Uncoated
Pedido mínimo:3-10 unidades por talla
Aplicación / Material

N Aleaciones de aluminioAcero al carbono (ISO P)Acero aleado (ISO P)

Solicita un presupuesto Chatea en WhatsApp
LO MEJOR PARA

4-Flute Design

Corte estable

Fine Thickness

0.1 mm Steps

Reduced Neck

Less Interference

Tamaños personalizados

OEM Options

T-Slot End Mill · Solid Carbide · HRC55

HRC55 4-Flute Solid Carbide T-Slot Cutter for Steel & Aluminum

Este 4-flute solid carbide T-slot cutter
is designed for T-slots, side grooves and recessed profiles that conventional square end mills cannot reach directly.

Ultra-fine carbide and a nano composite coating support wear resistance. Select the head size, neck clearance and coating according to the slot geometry and workpiece material.

Aplicaciones típicas:
precision components, mold parts and fixtures.

Material, Coating & Cutting Edge

High wear resistance solid carbide T-slot cutter

Carburo ultrafino

0.4 μm carbide substrate supports cutting-edge strength and wear resistance.

Nano composite coating on T-slot cutter

Nano Composite Coating

Supports heat and wear resistance. Confirm the coating for the selected workpiece.

T-slot cutter cutting-edge detail

Ground Cutting Edges

Sharp cutting edges support controlled side cutting and groove finishing.

Designed for Recessed Slot Access

Reach Behind Slot Walls

The enlarged cutting head accesses recessed grooves after a suitable entry slot or opening has been prepared.

Match the Neck Clearance

Choose the neck diameter and reach to clear the slot opening and reduce the risk of rubbing against the workpiece.

Four Cutting Edges

Four flutes provide repeated cutting engagement for side-slot milling and recessed profile machining.

Personalización basada en dibujos

Head diameter, cutting width, neck, shank and overall length can be reviewed against your drawing.

Machining Applications

T-Slot Milling
Side Groove Milling
Recessed Profiles
Accessible Undercuts

Compatibilidad con los materiales de las piezas de trabajo

hss selecciona los materiales de solicitud

Confirm material grade, hardness and coating before selecting the cutter.

MATERIAL SOLICITUD SELECTION NOTE
Acero al carbono T-slots and side grooves Match geometry to slot dimensions
Acero aleado Recessed grooves and profiles Confirm grade and hardness
Aluminio y aleaciones de aluminio Side grooves and recessed features Confirm aluminum-suitable coating and chip clearance
Mold & Tool Steel Mold grooves and recessed details Review hardness, reach and engagement
Hardened Steel up to Approx. HRC55 Application-dependent slot machining Confirm suitability for the selected size and setup

Lo mejor para

T-slots, side grooves and recessed features with sufficient entry access and neck clearance.

No es ideal para

Direct plunging into solid material or enclosed features without a suitable cutter entry path.

Application tips:
prepare entry clearance, keep tool overhang short and maintain chip removal from recessed slots.

Detalles del producto

Solid carbide T-slot end mill product image 5
Solid carbide T-slot end mill product image 4
Solid carbide T-slot end mill product image 2
Solid carbide T-slot end mill product image 1
Solid carbide T-slot end mill product image 6

Solid Carbide T-Slot Cutter Dimensions

Dimensional reference for the 4-flute solid carbide T-slot cutter, showing cutting-head thickness, reduced-neck clearance, shank diameter and overall length.

Solid carbide T-slot cutter dimension diagram showing cutting diameter, head thickness, neck diameter, neck length, shank diameter and overall length

Especificaciones técnicas

Tipo de herramienta T-Slot Cutter / Undercut Milling Cutter
Material / Flutes Solid Carbide / 4 Flutes
Diámetro de corte Ø3–Ø16 mm
Cutting Thickness T 0.5–12 mm, size-dependent
Fine Thickness Steps 0.1 mm within selected ranges
Diámetro del cuello Ø1.5–Ø8 mm
Longitud del cuello 5–25 mm
Longitud total 50 / 60 / 75 mm
Aplicaciones T-Slot Milling / Undercutting / Groove Profiling

Standard Sizes & Dimensions

Reference sizes covering Ø3–Ø16 mm cutting diameters with 0.1 mm thickness increments in selected ranges. All dimensions are in mm.

Cutting Dia. Thickness T (mm) Neck Dia. Longitud del cuello Diám. caña. OAL
Ø3 0.5–3.0 (0.1 steps) 1.5 5 4 50
Ø4 0.5–4.0 (0.1 steps); 4.5, 5 2 6 4 50
Ø6 0.5–4.0 (0.1 steps); 4.5, 5, 6 3 9 6 50
Ø8 0.5–4.0 (0.1 steps); 4.5, 5, 6, 8 4 12 8 50
Ø10 0.5–4.0 (0.1 steps); 4.5–8.0 (0.5 steps); 10 5 15 10 60
Ø12 0.5–4.0 (0.1 steps); 4.5–8.0 (0.5 steps); 10, 12 6 18 12 60
Ø14 2, 5, 8 7 25 14 75
Ø16 2, 5, 8 8 25 16 75

Thickness Note: Cutting thickness increases in 0.1 mm steps within the specified fine-size ranges. Larger thicknesses use 0.5 mm increments or individually listed sizes. All configurations have 4 flutes.

Nota de selección: Confirm cutting-head thickness, neck clearance, workpiece material and coating before ordering. Custom dimensions are available upon review.

Personalización de fresas de carburo monometálico para ranuras en T

Personalizado cutting diameters, head thickness, neck diameters, neck lengths, shank sizes, overall lengths and coatings are available for steel and aluminum applications, with 0.1 mm thickness increments in selected ranges.

t slot cutter end mill hy cutting tools

Calidad, inspección y entrega

Nuestra 4-flute solid carbide T-slot cutters undergo checks for cutting diameter, head thickness, neck dimensions, cutting-edge quality and coating condition before protective packaging and shipment.Quality inspection of solid carbide T-slot cuttersProtective packaging for solid carbide T-slot cutters

Solid Carbide T-Slot Cutter FAQs

Answers to common questions about T-slot milling, cutting thickness, neck clearance and material selection for steel and aluminum.

What is a solid carbide T-slot cutter used for?
A solid carbide T-slot cutter is used for T-slot milling, recessed side grooves and undercut features that conventional end mills cannot easily reach. Its cutting head and reduced-neck geometry support side-profile machining.
¿Es necesario que la ranura esté mecanizada previamente para el fresado de ranuras en T?
Usually, yes. A pre-machined entry slot must provide sufficient clearance for the cutter head. Check the entry path, groove dimensions and neck clearance before machining.
Are 0.1 mm cutting thickness increments available?
Yes. Selected sizes offer 0.1 mm thickness increments, including the 0.5–4.0 mm range on specified diameters. Larger thicknesses are available in 0.5 mm steps or individually listed sizes. Check the size table for available combinations.
How do I choose the cutting diameter and slot thickness?
Selecciona el cutting diameter according to the required T-slot width and available clearance. Match the head thickness to the slot height. Reference sizes cover Ø3–Ø16 mm, with thickness options varying by diameter.
Why are neck diameter and neck length important?
En reduced-neck design helps prevent interference with slot walls and adjacent shoulders. Neck diameter and length must provide sufficient clearance without excessive tool overhang or deflection.
Which steel and aluminum grades can be machined?
Material-specific configurations can be reviewed for 1018, 1045 and 4140 steel, as well as 6061, 6082 and 7075 aluminum alloys. Cutting geometry and coating should match the selected grade and machining conditions.
Which coating is suitable for steel or aluminum T-slot milling?
TiSiN or AlTiN options can be reviewed for steel, while DLC or uncoated configurations may be suitable for aluminum. Coating availability and cutting geometry must be confirmed by size and material.
Can this HRC55 T-slot cutter machine hardened steel?
The HRC55 designation refers to the steel-machining series. Suitability near 55 HRC depends on the actual steel grade, cutting geometry, coating and engagement. Confirm the application before production.

Customization & Ordering FAQs

Common purchasing questions about custom dimensions, trial orders, replacement tools and OEM supply.

Can T-slot cutters be customized from drawings or samples?
Yes. Custom cutting diameters, head thicknesses, neck dimensions, shank sizes, overall lengths and coatings can be reviewed from drawings or existing cutter samples.
What are the MOQ and lead time for custom T-slot cutters?
Small trial orders are supported. MOQ varies by configuration, often around 3–10 pieces per size. Standard-complexity custom tools typically take around 7 days; special geometries and coatings require confirmation.
Are OEM marking and private-label packaging available?
Sí. Laser marking, custom tool codes, private labels and packaging are available for distributors and OEM orders.
What information is needed to quote a custom T-slot cutter?
Provide the cutting diameter, head thickness, neck diameter, neck length, shank size, workpiece material and quantity. Include a drawing or existing tool sample for non-standard specifications.

¿Necesita medidas, precios u opciones a medida?

Envíanos tus especificaciones y la cantidad para que te enviemos un presupuesto.

  • Tallas estándar
  • Pedidos de prueba de pequeño volumen
  • Tallas variadas
  • OEM y herramientas personalizadas
Ver código QR – Ponte en contacto con el departamento de ventas a través de WeChat
Código QR de WeChat de HY Cutting Tools

Escanea el código para contactar con nosotros en WeChat.

Consulta sobre productos HY

WeChat

Código QR de WeChat de HY Cutting Tools

Escanea el código para contactar con nosotros en WeChat.

Productos relacionados