MFR Katı Karbür Mikro Yüzey Yiv Açma Çubukları (Küçük Delikler İçin)

MFR solid carbide micro face grooving tools for axial grooves on small components. Select the cutting width, groove diameter range and usable depth to suit your drawing.
Seri:MFR
Machining Operation:Internal Face Grooving
Yiv Genişliği:0.5–3.0 mm
Şaft Çapı:Ø4 / Ø5 / Ø6 / Ø8 mm
Groove Depth:1.0–6.0 mm
Min. Bore Diameter:Ø5 / Ø6 / Ø8 / Ø10 mm
Standart Sevkiyat1–3 İş Günü
OEM ve Özel ÜretimÇizimler / Örnekler
Asgari Sipariş MiktarıMinimum Sipariş Miktarı: 3-10 adet
EN İYİ İÇİN

Narrow Grooving

Dar Çaplı Erişim

Standart Boyutlar

Özel Üretim ve OEM

MFR Micro Face Grooving Tools for CNC Lathes

Bu solid carbide face grooving tool enters the workpiece end face in the axial direction to produce annular grooves. Match the cutting width and tool clearance to the groove’s inner and outer diameters. Confirm groove depth, cutting direction and holder compatibility for the selected MFR model.

Micro internal tooling series — product display

Match Groove Width, Reach & Clearance

Compact Face-Grooving Profile

Reaches recessed end faces where bore and shoulder clearance are limited.

Precision-Ground Cutting Edge

Supports controlled groove width and consistent profile finishing.

Rigid Solid Carbide Body

Helps limit deflection with secure clamping and minimal overhang.

Standard & Custom Configurations

Select width, shank and working length by model, or request drawing-based dimensions.

Küçük Çaplı Yüzey Yiv Açma Uygulamaları

  • Narrow face grooves in sleeves, bushings and precision fittings.
  • Recessed end-face features with restricted tool access.
  • Repeat groove production on CNC lathes and Swiss-type machines with suitable holders.

En iyisi: Internal end-face grooves matched to the selected tool’s width, depth and reach.

Aşağıdakiler için uygun değildir: Bore-wall grooving, threading or general boring without separately matched geometry.

Tool Geometry & Application Range

Confirm groove width, axial depth, groove diameter range, bore size and access length. Check cutting direction and clearance throughout entry and retraction; shank diameter alone does not establish bore compatibility.

MFR face grooving and MKR internal grooving application referenceMFR solid carbide micro face grooving bar geometryMicro internal tooling construction and machining feature reference

Material-Matched Configurations

Select cutting geometry and coating according to workpiece grade, hardness and groove requirements. Confirm material suitability for the selected MFR model.

Micro internal tooling workpiece-material reference

Series material reference; configurations vary by tool.

MFR Kesim Profili ve Ürün Detayları

MFR micro face grooving bar cutting profile and product detailsMFR solid carbide micro face grooving bar product photo 1MFR solid carbide micro face grooving bar product photo 2MFR solid carbide micro face grooving bar product photo 3MFR solid carbide micro face grooving bar product photo 4MFR solid carbide micro face grooving bar product photo 5

Custom Dimensions & OEM Supply

Drawing-based widths, reach, shanks, cutting profiles and coatings can be reviewed for non-standard grooves. Laser marking and private-label packaging support distributor and repeat orders.

MFR Micro Face Grooving Bar Specifications

Select MFR solid carbide face grooving bars by groove width, cutting depth, bore clearance and reach. All dimensions are in millimeters.

Model Codes & Dimensions
Micro internal tool model code and dimension referenceMFR face grooving and MKR internal grooving size chart

Model example: MFR 4 B0.75 L15 = MFR series · Ø4 shank · 0.75 cutting width · 15 working length.

MFR Standard Models

Model Shank D OAL L Reach L1 Depth T Min. Bore Ø
MFR 4 B0.75 L15 4 50 15 1.2 5
MFR 4 B1.0 L15 4 50 15 1.5 5
MFR 4 B1.5 L15 4 50 15 2.8 5
MFR 5 B0.75 L22 5 50 22 1.2 6
MFR 5 B1.0 L22 5 50 22 1.5 6
MFR 5 B1.5 L22 5 50 22 1.5 6
MFR 5 B2.0 L22 5 50 22 3.8 6
MFR 6 B0.5 L20 6 50 20 1.0 8
MFR 6 B1.0 L22 6 50 22 1.5 8
MFR 6 B1.5 L22 6 50 22 2.5 8
MFR 6 B2.0 L22 6 50 22 3.0 8
MFR 6 B2.5 L22 6 50 22 4.6 8
MFR 6 B3.0 L22 6 50 22 6.0 8
MFR 6 B3.0 L30 6 50 30 6.0 8
MFR 8 B1.0 L25 8 60 25 3.5 10
MFR 8 B1.5 L25 8 60 25 3.5 10
MFR 8 B2.0 L25 8 60 25 3.5 10
MFR 8 B2.5 L22 8 60 22 3.5 10
MFR 8 B3.0 L30 8 60 30 3.5 10

B indicates nominal cutting width. T and L1 are separate dimensions; confirm model limits and availability before ordering.

Ölçüler, fiyatlar veya özel seçenekler mi arıyorsunuz?

Send your model or groove drawing, workpiece material and quantity for size confirmation and quotation.

What is the difference between face grooving and internal grooving?

Face grooving produces an annular groove by feeding into the workpiece end face. Internal grooving produces a groove on the bore wall through radial feed. The tool geometry and clearance requirements differ.

Seçim Denetimleri

  • Match groove width, depth and diameter range to the cutting profile.
  • Check minimum bore size and full entry, cutting and retraction clearance.
  • Choose the shortest suitable reach and confirm holder fit and cutting direction.
Micro internal tooling machining methods and geometry-selection reference

İlgili Yüz Yiv Açma Aletleri

MFR Micro Face Grooving Bar Customization

Custom groove widths, cutting depths, working lengths and shanks are available for MFR solid carbide micro face grooving bars, subject to drawing review.

Micro internal tooling series for custom and OEM supply

OEM & Private-Label Options

Laser marking on micro internal tool shanks

Lazer İşaretleme

Logolar ve model kodları, şaft boşluğuna bağlı olarak.

Mikro iç aletler için özel markalı ambalajlar

Özel Markalı Ambalajlama

Branded labels and protective packaging.

Özel mikro iç kalıp çizimi referansı

Çizimler ve Teknik Özellikler

Approved dimensions for repeat orders.

Özel Sipariş Süreci

Requirement review → Drawing approval → Samples where required → Production & inspection.

Özel kesici takım tasarımı ve üretim süreci

MFR Grooving Bar Quality & Delivery

Material checks, grinding control and final inspection verify MFR face grooving bars against confirmed specifications or approved drawings.

Carbide tool dimensional and cutting-edge inspection

Önemli Kontrol Noktaları

  • Malzeme: Karbür kalitesi ve ham parça özellikleri.
  • Geometri: Cutting width, depth, corner profile and edge condition.
  • Boyutlar: Working length, shank size and overall length.
  • Tanımlama: Model, marking and packaging labels.

Batch-record requirements are confirmed with the order.

Tool Protection & Export Packing

Individual protection, clear labels and outer packing help protect cutting edges during storage and transport.

HY micro internal tooling seriesKesici aletlerin tek tek korunması ve ambalajlanması Export packing options for cutting tools

Teslim Süresi ve Nakliye

Standart araçlar: Stok durumuna bağlı olarak genellikle 1–3 iş günü sürer.

Özel araçlar: Lead time confirmed by geometry, coating, quantity and production requirements.

HY Kesici Aletler nakliye ve ödeme bilgileri

MFR Micro Face Grooving Bar FAQs

Is MFR suitable for face grooves inside small bores?
Yes. MFR solid carbide bars machine narrow annular grooves on recessed internal end faces in CNC-turned components. Bore-wall grooves require a suitable radial grooving tool.
Which MFR shank size fits my bore diameter?

The listed minimum bores are Ø5 mm for Ø4 shanks, Ø6 mm for Ø5 shanks, Ø8 mm for Ø6 shanks and Ø10 mm for Ø8 shanks.

Also confirm groove diameters, head clearance and the complete entry and retraction path. Minimum bore size alone does not establish suitability.

What groove widths and cutting depths are available?
Reference models cover 0.5–3.0 mm cutting widths and 1.0–6.0 mm T dimensions. The 6.0 mm depth is listed for MFR 6 B3.0 L22 and L30. Width and depth combinations vary by model; confirm against the size chart and tool drawing.
How do I choose the correct working length?
Choose the shortest L1 that reaches the groove with sufficient clearance. Reference lengths are 15, 20, 22, 25 and 30 mm. L1 describes working reach; T is the separate cutting-depth dimension. Confirm holder fit, tool hand and spindle rotation.
Can MFR grooving bars machine stainless steel or aluminum?
Configurations can be reviewed for steel, stainless steel, cast iron and selected aluminum or copper alloys. Provide material grade and hardness so cutting geometry, coating and parameters can be matched.

Özel Siparişler ve Tedarik

Can I order custom widths, reach or OEM packaging?
Yes. Cutting width, depth, profile, working length, shank and coating can be reviewed from drawings or samples. Laser marking, custom labels and private-label packaging are available by order.
What is the MOQ, and can I mix MFR models?
The standard MOQ is 10 pieces. Mixed-model trial orders can be reviewed according to specifications and stock. Include the required quantity for each model in your inquiry.
What should I send for pricing and delivery confirmation?
Send the model and quantity, or a drawing showing bore size, groove width, depth, diameters and access length. Include material and OEM requirements. Stock models typically dispatch within 1–3 working days; custom lead time is confirmed after specification review.

Selection & Technical Resources

Ölçüler, fiyatlar veya özel seçenekler mi arıyorsunuz?

Fiyat teklifi almak için teknik özelliklerinizi ve miktarınızı gönderin.

  • Standart Boyutlar
  • Küçük Ölçekli Dava Kararları
  • Çeşitli Bedenler
  • OEM ve Özel Üretim
QR Kodunu Görüntüle – WeChat üzerinden Satış Departmanı ile İletişime Geçin
HY Kesici Aletler WeChat QR Kodu

WeChat üzerinden bizimle iletişime geçmek için bu kodu tarayın.

HY Ürün Sorgulama

WeChat

HY Kesici Aletler WeChat QR Kodu

WeChat üzerinden bizimle iletişime geçmek için bu kodu tarayın.