HRC55 Çelik İçin 4 Kanallı TiSiN Kaplamalı Solid Karbür Köşe Radyüslü Parmak Freze

STABLE STEEL MILLING & CORNER PROTECTION SERIES

4-flute TiSiN-coated carbide corner radius end mills for stable steel milling, improved edge strength and reduced corner chipping.

Profil Sonu:Corner Radius
Flüt sayısı:4 oluk
Uygulama:Steel Profiling & Semi-Finishing
Corner Radius:R0.5/1/1.5/2
Flute Diameter:Ø1–Ø12 mm
Kaplama:TiSiN
P Karbonlu ÇelikP Alaşımlı ÇelikH Ön Sertleştirilmiş Çelik
Fiyat Teklifi Alın WhatsApp'ta Sohbet Et
EN İYİ İÇİN

Reinforced Corner Radius

Reduces edge chipping

Stable 4-Flute Milling

Consistent steel cutting

TiSiN Wear Protection

Heat and wear resistance

HRC55 Steel Applications

For steels up to HRC55

HRC55 4-Flute TiSiN-Coated Corner Radius End Mill Overview

Bu HRC55 4-flute TiSiN-coated solid carbide corner radius end mill şunlar için tasarlanmıştır: steel side milling, profiling and semi-finishing. Rounded cutting corners help reduce corner chipping, while the TiSiN kaplama supports heat and wear resistance.

Anahtar Yapılandırması

 

 

 

Kesim Geometrisi


4


FLÜT

Stable 4-Flute Milling

Four cutting edges support stable steel profiling and semi-finishing.

End Geometry


R


CORNER

Reinforced Corner Radius

Rounded corners improve edge strength and help reduce chipping.

Kaplama

TiSiN

Heat-Resistant Coating

TiSiN coating supports ısı ve aşınma direnci in steel milling.

Tasarım Detayları

Precision-ground corner radii, optimized 4-flute geometry and edge preparation support accurate profiling, efficient chip removal and cutting-edge durability. TiSiN coating provides heat and wear protection for stable steel milling.

HRC55 corner radius end mill precision radius design

HRC55 four-flute carbide end mill chip evacuation geometry

HRC55 corner radius end mill precision cutting-edge preparation

HRC55 TiSiN-coated corner radius end mill coating detail

Frezeleme İşlemleri

Suitable for steel side milling, pocket milling, contouring and semi-finishing.


Yan FrezelemeTavsiye edilir


Kontur FrezelemeTavsiye edilir


Cep FrezelemeUygun


Yarı Son İşlemUygun

Seçim Notu: Match the tool corner radius to the part fillet. Confirm machining conditions according to steel hardness and tool size.

Önerilen İş Parçası Malzemeleri

hrc55 steel application materials options cast incro alloy steel

ISO Malzeme Grubu Tipik Malzemeler Uygunluk
P Karbon Çelik General carbon and structural steels İlkokul
P Alaşımlı Çelik Selected low- and medium-alloy steels İlkokul
P Takım ve Kalıp Çeliği Selected tool and mold steels Confirm Grade
H Önceden Sertleştirilmiş Çelik Selected pre-hardened mold steels Başvuru İncelemesi

Malzeme Notu: HRC55 is the tool-series positioning. Confirm the steel grade, actual hardness and cutting conditions before selection.

Product Details & Milling Demonstration

TiSiN-Coated Corner Radius End Mill product views of the HRC55 4-flute AlTiN-coated carbide corner radius end mill for steel.

HRC55 corner radius end mill for steel single tool photo

HRC55 carbide corner radius end mills three-piece product photo

HRC55 corner radius end mills for steel product and packaging view

HRC55 Corner Radius End Mill Specifications

Technical specifications for the HRC55 4-flute TiSiN-Coated Corner Radius End Mill for steel milling.

PARAMETRE TEKNİK ÖZELLİKLER
Alet Tipi Solid Carbide Corner Radius End Mill
Sertlik Serisi HRC55
Alt tabaka Micro-Grain Solid Carbide
Kesim Geometrisi 4 Flutes / Corner Radius
Kaplama TiSiN
Helix Seçenekleri 30° / 35° / 45° — By Configuration
Kesim Çapı Ø1–Ø12 mm — Reference Sizes
Uygulamalar Steel Profiling, Side Milling & Semi-Finishing

Corner Radius End Mill Sizes

Metric sizes for 4-flute carbide corner radius end mills, including cutting diameter, corner radius, shank diameter and overall length. All dimensions in mm.

Dimension

Scroll to view the complete size range. Confirm dimensions and availability before ordering.

TEKNİK ÖZELLİKLER DC R DCON OAL
Ø1×R0.2×D4×50L 1 0.2 4 50
Ø1.5×R0.2×D4×50L 1.5 0.2 4 50
Ø2×R0.2 / R0.3 / R0.5×D4×50L 2 0.2 / 0.3 / 0.5 4 50
Ø2.5×R0.2 / R0.5×D4×50L 2.5 0.2 / 0.5 4 50
Ø3×R0.2 / R0.5×D3×50L 3 0.2 / 0.5 3 50
Ø3×R0.2 / R0.3 / R0.5 / R1×D4×50L 3 0.2 / 0.3 / 0.5 / 1 4 50
Ø4×R0.2 / R0.3 / R0.5 / R1×D4×50L 4 0.2 / 0.3 / 0.5 / 1 4 50
Ø5×R0.5 / R1×D6×50L 5 0.5 / 1 6 50
Ø6×R0.2 / R0.3 / R0.5 / R1×D6×50L 6 0.2 / 0.3 / 0.5 / 1 6 50
Ø6×R0.2 / R0.5 / R1×D8×60L 6 0.2 / 0.5 / 1 8 60
Ø8×R1.5 / R2×D8×60L 8 1.5 / 2 8 60
Ø10×R0.5 / R1 / R1.5 / R2 / R3×D10×75L 10 0.5 / 1 / 1.5 / 2 / 3 10 75
Ø12×R0.5 / R1 / R2 / R3×D12×75L 12 0.5 / 1 / 2 / 3 12 75

Not: Reference dimensions only. Confirm the required radius, flute length and stock availability before ordering.

Custom Corner Radius End Mills

Custom cutting diameters, corner radii, flute lengths, shank sizes, overall lengths and OEM marking are available for TiSiN-coated carbide end mills, subject to drawing review.

Need HRC55 Corner Radius End Mills?

Send your steel grade, cutting diameter, corner radius, tool length and quantity for selection and quotation.

Teklif İsteyin

TiSiN-Coated Corner Radius End Mill Customization

Custom cutting diameters, corner radii, flute lengths, helix angles, shank sizes and overall lengths are available to meet your requirements.

HRC70 4 kanallı katı karbür kare uçlu freze, boyutları ve kesme geometrisi özelleştirilebilir

OEM ve Özel Marka

Özel lazer markalama, ürün etiketleri ve markalı ambalaj seçenekleri mevcuttur. Şunlara göz atın: OEM ve Özel Etiket Hizmetleri.

Kalite, Denetim ve Teslimat

Our solid carbide square end mills undergo material verification, precision grinding and final inspection to ensure consistent dimensions, cutting-edge quality and coating finish.

Production quality control to shipment hy cutting tools

TiSiN-Coated Corner Radius End Mill FAQs

Common questions about TiSiN-coated 4-flute carbide corner radius end mills for steel milling, tool selection and ordering.

What steels can this HRC55 corner radius end mill machine?
It is designed for carbon steel, alloy steel and selected tool, mold and pre-hardened steels. Confirm the actual grade and hardness before machining.
Can this carbide end mill machine steel up to HRC55?
HRC55 is the series application target, not a guarantee for every steel grade. Suitability depends on hardness, tool size and cutting conditions.
What is the difference between a corner radius and a square end mill?
A corner radius end mill has rounded cutting corners that help reduce edge chipping. A square end mill has sharp corners for machining square features.
How do I choose the correct corner radius (R)?
Select the R value according to the required part fillet and tool strength. The cutter radius must not exceed the required internal fillet radius.
Why choose a 4-flute TiSiN-coated corner radius end mill?
Four flutes support stable steel profiling and semi-finishing. The reinforced corner radius reduces chipping risk, while TiSiN coating provides heat and wear protection.
What milling operations are suitable for this tool?
Suitable for side milling, contour milling, shoulder milling and semi-finishing in steel. Pocket milling depends on tool entry and chip evacuation conditions.

Sizes & Ordering FAQs

Size selection, custom carbide end mills and OEM supply for distributors and importers.

What HRC55 corner radius end mill sizes are available?
Reference diameters range from Ø1 to Ø12 mm, with selected R0.2–R3 corner radii. See the Specifications tab for available combinations.
Can I order custom corner radii and non-standard dimensions?
Yes. Custom cutting diameters, corner radii, flute lengths, shank sizes, helix angles and overall lengths can be reviewed from drawings or samples.
Are samples, mixed-size orders and OEM branding available?
Sample orders, mixed sizes, laser marking and private-label packaging can be arranged subject to configuration, quantity and availability.
Fiyat teklifi için hangi bilgiler gereklidir?
Provide the steel grade, hardness, cutting diameter, corner radius, flute length, shank diameter, overall length and quantity. Include drawings for custom tools.

Teknik Dosyalar

Product catalog and starting cutting data for carbide end mill selection.

Katı Karbür Uçlu Freze Kataloğu

Browse related end mills, coatings and sizes.

Kataloğu Görüntüle

Uçlu Freze Hızları ve İlerleme Hızları Kılavuzu

Reference starting milling parameters.

Kılavuza Göz At

Ölçüler, fiyatlar veya özel seçenekler mi arıyorsunuz?

Fiyat teklifi almak için teknik özelliklerinizi ve miktarınızı gönderin.

  • Standart Boyutlar
  • Küçük Ölçekli Dava Kararları
  • Çeşitli Bedenler
  • OEM ve Özel Üretim
QR Kodunu Görüntüle – WeChat üzerinden Satış Departmanı ile İletişime Geçin
HY Kesici Aletler WeChat QR Kodu

WeChat üzerinden bizimle iletişime geçmek için bu kodu tarayın.

HY Ürün Sorgulama

WeChat

HY Kesici Aletler WeChat QR Kodu

WeChat üzerinden bizimle iletişime geçmek için bu kodu tarayın.

İlgili Ürünler