HRC55 4날 TiSiN 코팅 솔리드 카바이드 코너 반경 엔드밀 (강재용)
4-flute TiSiN-coated carbide corner radius end mills for stable steel milling, improved edge strength and reduced corner chipping.
보강된 모서리 반경
Reduces edge chipping
Stable 4-Flute Milling
Consistent steel cutting
TiSiN Wear Protection
Heat and wear resistance
HRC55 Steel Applications
For steels up to HRC55
HRC55 4-Flute TiSiN-Coated Corner Radius End Mill Overview
그리고 HRC55 4-flute TiSiN-coated solid carbide corner radius end mill ~을 위해 설계되었습니다 steel side milling, profiling and semi-finishing. Rounded cutting corners help reduce corner chipping, while the TiSiN coating supports heat and wear resistance.
주요 구성
절단 지오메트리
4
플루트
Stable 4-Flute Milling
Four cutting edges support stable steel profiling and semi-finishing.
끝 지오메트리
R
CORNER
보강된 모서리 반경
Rounded corners improve edge strength and help reduce chipping.
TiSiN
Heat-Resistant Coating
TiSiN coating supports heat and wear resistance in steel milling.
Design Details
Precision-ground corner radii, optimized 4-flute geometry and edge preparation support accurate profiling, efficient chip removal and cutting-edge durability. TiSiN coating provides heat and wear protection for stable steel milling.
Milling Operations
Suitable for steel side milling, pocket milling, contouring and semi-finishing.
측면 밀링Recommended
Contour MillingRecommended
Pocket MillingSuitable
Semi-FinishingSuitable
선정 참고 사항: Match the tool corner radius to the part fillet. Confirm machining conditions according to steel hardness and tool size.
권장 공작물 재료
| ISO | 재료 그룹 | Typical Materials | Suitability |
|---|---|---|---|
| P | 탄소강 | 일반 탄소강 및 구조용강 | Primary |
| P | 합금강 | Selected low- and medium-alloy steels | Primary |
| P | Tool & Mold Steel | Selected tool and mold steels | Confirm Grade |
| H | Pre-Hardened Steel | Selected pre-hardened mold steels | Application Review |
재료 관련 참고 사항: HRC55 is the tool-series positioning. Confirm the steel grade, actual hardness and cutting conditions before selection.
제품 상세 정보 및 밀링 시연
TiSiN-Coated Corner Radius End Mill product views of the HRC55 4-flute AlTiN-coated carbide corner radius end mill for steel.
HRC55 Corner Radius End Mill Specifications
Technical specifications for the HRC55 4-flute TiSiN-Coated Corner Radius End Mill for steel milling.
| 매개변수 | 사양 |
|---|---|
| 도구 유형 | Solid Carbide Corner Radius End Mill |
| 경도 시리즈 | HRC55 |
| 기판 | 미세 입자 초경합금 |
| 절단 지오메트리 | 4개의 홈 / 모서리 반경 |
| 코팅 | TiSiN |
| 헬릭스 옵션 | 30° / 35° / 45° — 구성에 따라 |
| 절단 직경 | Ø1–Ø12 mm — Reference Sizes |
| 애플리케이션 | Steel Profiling, Side Milling & Semi-Finishing |
Corner Radius End Mill Sizes
Metric sizes for 4-flute carbide corner radius end mills, including cutting diameter, corner radius, shank diameter and overall length. All dimensions in mm.
Scroll to view the complete size range. 주문하기 전에 규격과 재고 여부를 확인해 주세요.
| 사양 | DC | R | DCON | OAL |
|---|---|---|---|---|
| Ø1×R0.2×D4×50L | 1 | 0.2 | 4 | 50 |
| Ø1.5×R0.2×D4×50L | 1.5 | 0.2 | 4 | 50 |
| Ø2×R0.2 / R0.3 / R0.5×D4×50L | 2 | 0.2 / 0.3 / 0.5 | 4 | 50 |
| Ø2.5×R0.2 / R0.5×D4×50L | 2.5 | 0.2 / 0.5 | 4 | 50 |
| Ø3×R0.2 / R0.5×D3×50L | 3 | 0.2 / 0.5 | 3 | 50 |
| Ø3×R0.2 / R0.3 / R0.5 / R1×D4×50L | 3 | 0.2 / 0.3 / 0.5 / 1 | 4 | 50 |
| Ø4×R0.2 / R0.3 / R0.5 / R1×D4×50L | 4 | 0.2 / 0.3 / 0.5 / 1 | 4 | 50 |
| Ø5×R0.5 / R1×D6×50L | 5 | 0.5 / 1 | 6 | 50 |
| Ø6×R0.2 / R0.3 / R0.5 / R1×D6×50L | 6 | 0.2 / 0.3 / 0.5 / 1 | 6 | 50 |
| Ø6×R0.2 / R0.5 / R1×D8×60L | 6 | 0.2 / 0.5 / 1 | 8 | 60 |
| Ø8×R1.5 / R2×D8×60L | 8 | 1.5 / 2 | 8 | 60 |
| Ø10×R0.5 / R1 / R1.5 / R2 / R3×D10×75L | 10 | 0.5 / 1 / 1.5 / 2 / 3 | 10 | 75 |
| Ø12×R0.5 / R1 / R2 / R3×D12×75L | 12 | 0.5 / 1 / 2 / 3 | 12 | 75 |
참고: Reference dimensions only. Confirm the required radius, flute length and stock availability before ordering.
Custom Corner Radius End Mills
Custom cutting diameters, corner radii, flute lengths, shank sizes, overall lengths and OEM marking are available for TiSiN-coated carbide end mills, subject to drawing review.
Need HRC55 Corner Radius End Mills?
Send your steel grade, cutting diameter, corner radius, tool length and quantity for selection and quotation.
TiSiN-Coated Corner Radius End Mill Customization
Custom cutting diameters, corner radii, flute lengths, helix angles, shank sizes and overall lengths are available to meet your requirements.
OEM 및 자체 브랜드
Custom laser marking, product labels and branded packaging are available. See our OEM 및 자체 브랜드 서비스.
품질, 검사 및 납품
Our solid carbide square end mills undergo material verification, precision grinding and final inspection to ensure consistent dimensions, cutting-edge quality and coating finish.
TiSiN-Coated Corner Radius End Mill FAQs
Common questions about TiSiN-coated 4-flute carbide corner radius end mills for steel milling, tool selection and ordering.
What steels can this HRC55 corner radius end mill machine?
Can this carbide end mill machine steel up to HRC55?
What is the difference between a corner radius and a square end mill?
How do I choose the correct corner radius (R)?
Why choose a 4-flute TiSiN-coated corner radius end mill?
What milling operations are suitable for this tool?
Sizes & Ordering FAQs
Size selection, custom carbide end mills and OEM supply for distributors and importers.
What HRC55 corner radius end mill sizes are available?
Can I order custom corner radii and non-standard dimensions?
Are samples, mixed-size orders and OEM branding available?
견적서를 받기 위해서는 어떤 정보가 필요한가요?
기술 자료 다운로드
Product catalog and starting cutting data for carbide end mill selection.
사이즈, 가격 또는 맞춤 제작 옵션이 필요하신가요?
견적 요청을 위해 사양과 수량을 보내주십시오.
- 표준 크기
- 소액 재판 명령
- 다양한 사이즈
- OEM 및 맞춤형 제작
QR 코드 보기 – 위챗으로 영업팀에 문의하기
위챗으로 문의하시려면 QR 코드를 스캔하세요.
위챗
위챗으로 문의하시려면 QR 코드를 스캔하세요.
