Customer Case: A Custom DLC Ball Nose End Mill with a Long Tapered Neck

CUSTOMER CASE · CUSTOM TOOLING · ALUMINUM MACHINING

This customer project involved a custom DLC ball nose end mill for aluminum machining, with two flutes and a long tapered neck. HY Cutting Tools supplied design sketches and a rotating software model as part of the proposal, then manufactured the tool. The proposal materials and finished-tool photograph are shown in this case.

การสมัคร

Custom tooling for aluminum machining.

Factory Contribution

Design sketches, a rotating software model and manufacture of the custom tool.

In this case

The Customer’s Requirement

The customer needed a custom tool for aluminum machining. The project combined a ball-nose cutting end with a long tapered neck, rather than an extended cutting section. The configuration included two flutes and a DLC coating.

Project itemTool configuration
วัสดุของชิ้นงานAluminum
Cutting profileหัวลูกบอล
จำนวนฟลูตTwo
การเคลือบDLC
Neck structureLong tapered neck
Tool supplyCustom-made

The Factory’s Design Proposal

HY Cutting Tools supplied both the sketches and the rotating software model for this project. Together, they show the proposed dimensions and the tool’s overall shape, with particular attention to the cutting section and long tapered neck.

Factory-prepared sketches

The proposal sheet shows several tool profiles, with handwritten length, diameter and angle annotations. It makes the differences between the profiles visible in one place.

Factory design sketches of custom ball nose end mills showing lengths, diameters and tapered neck profiles
Factory-prepared design sketches showing proposed tool profiles and dimensions. View at full size →

Because the sheet contains several proposed variants, the dimensions should be read against the corresponding sketch. It is not a single final production drawing for the photographed tool.

A closer view of the proposed tool

The factory’s rotating model shows how the ball-nose cutting section, tapered neck and shank connect. It lets the reader view the proposed geometry from different angles.

Factory-provided model showing the proposed tool geometry. This is a design preview, not a machining trial.

Custom DLC Ball Nose End Mill: Design Details

Cutting end

The design combines a ball-nose profile with two flutes. The ball radius and cutting length describe the working end; they should be specified separately from the longer neck behind it.

Long tapered neck

The neck widens toward the shank behind the cutting section. For a similar tool, its length and taper need to be considered together with the workpiece walls and the toolpath so the neck can clear the part.

DLC coating

DLC is the specified coating for this aluminum application. Suitable DLC systems can help reduce friction and aluminum adhesion, while the coating and cutting geometry still need to suit the particular alloy and operation.

The Finished Custom Tool

The photograph below shows the manufactured tool: a short two-flute ball-nose cutting section, a long tapered neck and a cylindrical shank. The project’s coating specification is DLC for aluminum machining.

Custom DLC ball nose end mill with two flutes and a long tapered neck for aluminum machining
The finished custom tool: a two-flute ball-nose cutting section, long tapered neck and cylindrical shank.

This case brings the factory’s proposal materials and the finished product together. For a similar order, the ball radius, cutting length, neck profile, reach and shank dimensions need to be defined for that particular job.

มีความต้องการเครื่องมือที่ปรับแต่งตามความต้องการคล้ายกันหรือไม่?

If you or your customer needs a similar tool, start with the aluminum grade, the feature to be machined and the required quantity. A drawing, a sketch or photographs of an existing tool can help explain the requirement. Mark the dimensions that must stay fixed and the areas where you need a recommendation.

For example, “the same tool, but longer” could mean a longer cutting section or more reach behind it. Marking those lengths separately helps the factory propose the right change. If the requirement is access into a narrow feature, include a workpiece section showing the surrounding walls.

Technical background: Harvey Tool: tool coating application guide. The coating data provide general application guidance, not test results for this custom tool.