Customer Case: A Custom DLC Ball Nose End Mill with a Long Tapered Neck
CUSTOMER CASE · CUSTOM TOOLING · ALUMINUM MACHINING
This customer project involved a custom DLC ball nose end mill for aluminum machining, with two flutes and a long tapered neck. HY Cutting Tools supplied design sketches and a rotating software model as part of the proposal, then manufactured the tool. The proposal materials and finished-tool photograph are shown in this case.
Ứng dụng
Custom tooling for aluminum machining.
Factory Contribution
Design sketches, a rotating software model and manufacture of the custom tool.
In this case
The Customer’s Requirement
The customer needed a custom tool for aluminum machining. The project combined a ball-nose cutting end with a long tapered neck, rather than an extended cutting section. The configuration included two flutes and a DLC coating.
| Project item | Tool configuration |
|---|---|
| Vật liệu phôi | Aluminum |
| Cutting profile | Ball nose |
| Số lượng sáo | Two |
| Lớp phủ | DLC |
| Neck structure | Long tapered neck |
| Tool supply | Custom-made |
The Factory’s Design Proposal
HY Cutting Tools supplied both the sketches and the rotating software model for this project. Together, they show the proposed dimensions and the tool’s overall shape, with particular attention to the cutting section and long tapered neck.
Factory-prepared sketches
The proposal sheet shows several tool profiles, with handwritten length, diameter and angle annotations. It makes the differences between the profiles visible in one place.
Because the sheet contains several proposed variants, the dimensions should be read against the corresponding sketch. It is not a single final production drawing for the photographed tool.
A closer view of the proposed tool
The factory’s rotating model shows how the ball-nose cutting section, tapered neck and shank connect. It lets the reader view the proposed geometry from different angles.
Custom DLC Ball Nose End Mill: Design Details
Cutting end
The design combines a ball-nose profile with two flutes. The ball radius and cutting length describe the working end; they should be specified separately from the longer neck behind it.
Long tapered neck
The neck widens toward the shank behind the cutting section. For a similar tool, its length and taper need to be considered together with the workpiece walls and the toolpath so the neck can clear the part.
Lớp phủ DLC
DLC is the specified coating for this aluminum application. Suitable DLC systems can help reduce friction and aluminum adhesion, while the coating and cutting geometry still need to suit the particular alloy and operation.
The Finished Custom Tool
The photograph below shows the manufactured tool: a short two-flute ball-nose cutting section, a long tapered neck and a cylindrical shank. The project’s coating specification is DLC for aluminum machining.
This case brings the factory’s proposal materials and the finished product together. For a similar order, the ball radius, cutting length, neck profile, reach and shank dimensions need to be defined for that particular job.
Bạn có nhu cầu về một công cụ tùy chỉnh tương tự không?
If you or your customer needs a similar tool, start with the aluminum grade, the feature to be machined and the required quantity. A drawing, a sketch or photographs of an existing tool can help explain the requirement. Mark the dimensions that must stay fixed and the areas where you need a recommendation.
For example, “the same tool, but longer” could mean a longer cutting section or more reach behind it. Marking those lengths separately helps the factory propose the right change. If the requirement is access into a narrow feature, include a workpiece section showing the surrounding walls.
Technical background: Harvey Tool: tool coating application guide. The coating data provide general application guidance, not test results for this custom tool.
