2-Flute Polished Solid Carbide Ball Nose End Mill for Aluminum
This 2-flute polished solid carbide ball nose end mill is designed for smooth, efficient and precise aluminum machining.
- ◆Polished flutes reduce friction and aluminum chip adhesion
- ◆2-flute design provides efficient chip evacuation
- ◆Ball nose geometry produces smooth 3D contours and curved surfaces
10 PCS
1–3 Days
2
볼 노즈 엔드밀
Polished
알루미늄
Consistent Quality
Consistent geometry across repeat orders.
유연한 주문
Small batches and mixed sizes available.
OEM Support
Custom marking, labels and packaging.
표준 및 맞춤형
Standard sizes and custom configurations.
2-Flute Polished Solid Carbide Ball Nose End Mill Overview
This 2-flute polished solid carbide ball nose end mill is designed for three-dimensional contouring, cavity machining and curved-surface finishing in aluminum and other non-ferrous materials. Sharp cutting edges reduce cutting resistance, while the polished flute surface helps limit chip adhesion and supports smooth evacuation during continuous CNC machining. Standard and extended-length configurations cover R0.5–R10, Ø1–Ø20 mm cutting diameters and 50–150 mm overall lengths, giving distributors and tooling suppliers a practical range for general finishing, deeper profiles and replacement-tool requirements.
Geometry for Aluminum Finishing
Open Two-Flute Geometry
Two flutes provide chip space for aluminum machining and help reduce chip recutting during contour finishing.
Ball Nose Surface Contact
The full-radius cutting profile follows curved, blended and free-form surfaces with progressive tool engagement.
Key Features & Benefits
Polished Flute Surface
A smooth flute finish helps reduce aluminum adhesion and supports consistent chip flow.
Sharp Cutting Edge
Sharp edge preparation lowers cutting resistance in soft and adhesive non-ferrous materials.
Smooth 3D Toolpaths
Ball-end geometry supports continuous finishing across curved and complex surfaces.
Broad Size Coverage
Standard, long-reach and extended-length sizes support varied profile depths and holder clearances.
권장 애플리케이션
Select the radius, flute length and overall length according to the surface curvature, required reach, holder clearance and finishing allowance.
Suitable Workpiece Materials
| MATERIAL GROUP | APPLICATION POSITIONING |
|---|---|
| N Aluminum Alloys | Primary application for polished 2-flute configurations |
| N Copper & Brass | Suitable after grade, lubrication and edge-condition review |
| N Other Non-Ferrous | Confirm material abrasiveness, chip behavior and finish requirement |
Product Details & Milling Demonstration
Product views of the polished cutting edges and ball-nose profile, followed by an aluminum-machining video.
Ball Nose End Mill Specifications & Sizes
Standard, long-reach and extended-length dimensions for the 2-flute polished solid carbide ball nose end mill for aluminum. The two supplied size lists have been consolidated below. All dimensions are in millimeters.
Technical Configuration
| PARAMETER | REFERENCE CONFIGURATION |
|---|---|
| 도구 재질 | Fine-Grain Solid Carbide |
| End Profile | Full Radius / Ball Nose |
| 플루트 수 | 2 Flutes |
| Flute Finish | Polished surface for reduced chip adhesion |
| 절단 직경 범위 | Ø1–Ø20 mm |
| Ball Radius Range | R0.5–R10 |
| Shank Diameter Range | Ø4–Ø20 mm |
| Overall Length Range | 50–150 mm |
| Primary Materials | Aluminum, aluminum alloys, copper, brass and selected non-ferrous materials |
| Primary Operations | 3D contouring, curved-surface machining, cavity and profile finishing |
Consolidated Size Table
The specification code follows the format R × L1 × Dd × L. Confirm stock and production availability for the required size before ordering.
| SPECIFICATION | SHANK DIA. d | CUTTING DIA. D | FLUTE LENGTH L1 | RADIUS R | OVERALL LENGTH L |
|---|---|---|---|---|---|
| R0.5×2×D4×50L | 4 | 1 | 2 | 0.5 | 50 |
| R0.75×3×D4×50L | 4 | 1.5 | 3 | 0.75 | 50 |
| R1×4×D4×50L | 4 | 2 | 4 | 1 | 50 |
| R1.25×4×D4×50L | 4 | 2.5 | 4 | 1.25 | 50 |
| R1.5×5×D4×50L | 4 | 3 | 5 | 1.5 | 50 |
| R2×6×D4×50L | 4 | 4 | 6 | 2 | 50 |
| R2.5×8×D5×50L | 5 | 5 | 8 | 2.5 | 50 |
| R2.5×8×D6×50L | 6 | 5 | 8 | 2.5 | 50 |
| R3×12×D6×50L | 6 | 6 | 12 | 3 | 50 |
| R4×12×D8×60L | 8 | 8 | 12 | 4 | 60 |
| R4×16×D8×60L | 8 | 8 | 16 | 4 | 60 |
| R5×15×D10×75L | 10 | 10 | 15 | 5 | 75 |
| R5×20×D10×75L | 10 | 10 | 20 | 5 | 75 |
| R6×24×D12×75L | 12 | 12 | 24 | 6 | 75 |
| R1.5×8×D4×75L | 4 | 3 | 8 | 1.5 | 75 |
| R2×10×D4×75L | 4 | 4 | 10 | 2 | 75 |
| R3×12×D6×75L | 6 | 6 | 12 | 3 | 75 |
| R4×16×D8×75L | 8 | 8 | 16 | 4 | 75 |
| R2×12×D4×100L | 4 | 4 | 12 | 2 | 100 |
| R3×15×D6×100L | 6 | 6 | 15 | 3 | 100 |
| R4×18×D8×100L | 8 | 8 | 18 | 4 | 100 |
| R5×20×D10×100L | 10 | 10 | 20 | 5 | 100 |
| R6×24×D12×100L | 12 | 12 | 24 | 6 | 100 |
| R6×24×D12×150L | 12 | 12 | 24 | 6 | 150 |
| R6.5×28×D14×100L | 14 | 13 | 28 | 6.5 | 100 |
| R7×28×D14×80L | 14 | 14 | 28 | 7 | 80 |
| R7×28×D14×100L | 14 | 14 | 28 | 7 | 100 |
| R7×28×D14×150L | 14 | 14 | 28 | 7 | 150 |
| R8×32×D16×100L | 16 | 16 | 32 | 8 | 100 |
| R8×32×D16×150L | 16 | 16 | 32 | 8 | 150 |
| R9×36×D18×100L | 18 | 18 | 36 | 9 | 100 |
| R9×36×D18×150L | 18 | 18 | 36 | 9 | 150 |
| R10×40×D20×100L | 20 | 20 | 40 | 10 | 100 |
| R10×40×D20×150L | 20 | 20 | 40 | 10 | 150 |
Ball Nose Size Selection
- Ball Radius: Select R according to surface curvature, fillet size and required scallop height.
- Flute Length: Use only the length required to reach the feature while maintaining sufficient rigidity.
- 전체 길이: Longer 75–150 mm tools require reduced engagement and stable low-runout toolholding.
- Effective Diameter: Calculate spindle speed from the actual ball-nose contact diameter where possible.
- Chip Evacuation: Use suitable air blast, mist or coolant to prevent aluminum chip adhesion and recutting.
2-Flute Polished Ball Nose End Mill Customization
Cutting diameter, ball radius, flute length, overall length, shank diameter, cutting-edge geometry and flute finish can be configured for aluminum and non-ferrous machining. Reference sizes cover Ø1–Ø20 mm cutting diameters, R0.5–R10 ball radii and 50–150 mm overall lengths. Non-standard dimensions and application-specific geometry can be reviewed according to the aluminum grade, surface curvature, required machining depth, tool overhang, chip-evacuation conditions and surface-finish requirement.
| PARAMETER | MANUFACTURING CAPABILITIES |
|---|---|
| 절단 직경 | Reference Ø1–Ø20 mm range, with selected intermediate and non-standard diameters reviewed according to the tool drawing |
| Ball Radius | Reference R0.5–R10 full-radius configurations, with custom radius and profile requirements reviewed according to the workpiece geometry |
| 플루트 수 | Standard 2-flute design with open chip space for aluminum contouring, cavity machining and curved-surface finishing |
| 플루트 길이 | Standard, long-reach and drawing-defined flute lengths selected according to the machining depth, surface profile and required rigidity |
| 전체 길이 | Reference 50–150 mm overall lengths, with non-standard reach configurations reviewed according to cavity depth and holder clearance |
| 섕크 구성 | Reference Ø4–Ø20 mm cylindrical shanks, with selected shank diameter and clamping-length adjustments available according to the holder and drawing |
| Ball Nose Geometry | Precision-ground full-radius cutting profile for 3D contours, curved surfaces, blended features and cavity finishing |
| Flute Polishing | Polished flute surface designed to reduce aluminum adhesion, support chip evacuation and limit chip recutting |
| 엣지 준비 | Sharp cutting-edge preparation, end-face geometry and gash design can be matched to the aluminum grade, cutting load and required surface finish |
| Surface & Coating Options | Polished uncoated configuration for general aluminum machining, with DLC or other low-adhesion surface options reviewed for abrasive or high-silicon aluminum alloys |
| Workpiece Materials | Geometry can be reviewed for aluminum alloys, copper, brass and selected non-ferrous materials according to chip behavior and abrasiveness |
| Milling Application | Configurations can be reviewed for 3D contouring, profiling, curved-surface machining, cavity finishing and light semi-finishing |
| Dimensional Tolerance | Drawing-defined requirements for cutting diameter, ball radius, flute length, shank diameter, overall length, runout and ball-profile accuracy |
OEM 및 자체 브랜드 서비스
OEM manufacturing and private-label supply options are available for industrial distributors, tooling brands and repeat-production customers. Laser identification, label content, protective packaging and coating presentation can be configured according to the approved product specification and order requirements.
Laser Etching
Custom logos, tool codes, cutting dimensions, coating identification and batch numbers can be marked according to the available shank area.
Custom Labels & Packaging
Individual protective tubes, product labels, specification details, colored packaging tubes and private-label packaging can be reviewed.
Commercial Terms
MOQ, sample evaluation, custom-size trials, repeat orders and scheduled supply programs are confirmed according to the selected configuration.
Technical Workflow
A structured review process is used to confirm standard, customized and private-label square end mill requirements before production.
Inquiry
Submit the material, hardness, milling operation, dimensions, tolerance and quantity.
Engineering
Review flute geometry, helix angle, edge preparation, coating, ap and ae.
Commercial
Confirm quotation, MOQ, sample requirements, production schedule and delivery terms.
Production
CNC grinding, end-face formation, edge preparation, coating and laser marking.
Quality Control
Inspect diameter, flute length, shank, runout, square-end geometry and cutting edges.
Quality, Inspection & Delivery
Our solid carbide square end mills are controlled through material verification, precision grinding, in-process measurement and final inspection. Key dimensions, square-end geometry, cutting-edge condition, coating appearance and product identification are reviewed according to the approved specification or drawing before packing.
Three-Stage Quality Control
Inspection checkpoints are arranged around the manufacturing process to support dimensional consistency and repeat-order control.
Incoming Material Control
Carbide substrate grade, blank dimensions and supplied material information are checked against the production requirement.
In-Process Grinding Control
Cutting diameter, flute geometry, flute length, square-end profile and shank dimensions are monitored during CNC grinding.
Final Tool Inspection
Finished tools are reviewed for specified dimensions, runout, cutting-edge condition, coating appearance, marking and packing identification.
Key Inspection Characteristics
Inspection requirements are confirmed according to the standard product specification or the approved custom drawing.
| INSPECTION ITEM | CONTROL FOCUS | CONFIRMATION BASIS |
|---|---|---|
| Cutting Diameter (DC) | Diameter and dimensional consistency | Standard specification or approved drawing |
| Flute Length (APMX) | Effective cutting length | Confirmed product size or drawing requirement |
| Shank Diameter (DCON) | Clamping-section dimension and surface condition | Applicable shank specification |
| Overall Length (OAL) | Total tool length | Standard size matrix or approved drawing |
| Radial Runout | Concentricity between cutting section and shank | Agreed inspection requirement |
| Square-End Geometry | End-face profile, corner condition and center-cutting form | Selected tool configuration |
| Flute & Helix Profile | Flute count, helix form and grinding consistency | Approved manufacturing configuration |
| Cutting Edge & Coating | Edge condition, visible defects and coating appearance | Application-specific production requirement |
| Marking & Identification | Tool code, dimensions and batch information where applicable | Confirmed order and packaging specification |
Measurement & Batch Traceability
Optical measuring systems, tool inspection equipment and appropriate dimensional gauges are selected according to the feature being checked.
Optical Measurement
Profile and dimensional review of specified cutting features.
Runout Verification
Concentricity review based on the agreed product requirement.
Edge Inspection
Magnified review of the end face, corners and cutting-edge condition.
Batch Identification
Order, product and batch information are linked where required for repeat supply.
Protective Packaging Process
Finished end mills are protected to reduce contact between cutting edges and to support clear product identification during storage and transportation.
Bulk-Order & Export Packaging
Bulk shipments can be arranged with reinforced cartons, protective wrapping, palletized loading or export cases according to order quantity, shipment weight and agreed transportation requirements.
Delivery Coordination
Production completion, packing method and dispatch arrangements are confirmed according to the approved order. Courier, air, sea or customer-designated shipping options can be reviewed according to shipment size and destination. Final lead time is confirmed after product specifications, quantity and packaging requirements are approved.
Product & Application FAQs
Answers to common questions about selecting and applying the 2-Flute Polished Solid Carbide Ball Nose End Mill for Aluminum.
What materials is this ball nose end mill designed to machine?
What operations are suitable for the ball-nose profile?
Why is a 2-flute design used for aluminum machining?
How can built-up edge and aluminum adhesion be controlled?
Can this tool be used for finishing 3D surfaces?
What is the benefit of polished flute surfaces?
Ordering & Customization FAQs
Information for distributors, tooling brands and customers requesting standard or application-specific ball-nose configurations.
What standard sizes are available?
Can non-standard dimensions or geometry be manufactured?
Are OEM marking and private-label packaging available?
What information is required for an accurate quotation?
Technical Downloads
Use the following references for product selection and starting cutting-data review.
Solid Carbide End Mill Catalog
Review related ball-nose, square-end, corner-radius and application-specific end mill series.
End Mill Speeds & Feeds Guide
Access reference starting parameters for application review and controlled machining trials.
Need a Size or Application Review?
Send the aluminum or non-ferrous material grade, required dimensions, machining operation and quantity for configuration and quotation review.
Need Sizes, Pricing or Custom Options?
Send us the required tool type, sizes, quantities, workpiece material and any OEM or custom requirements. We will confirm suitable specifications, availability, lead time and quotation details.
Drawings, size lists and reference photos are welcome.
