HRC45-HRC65 2-Flute Solid Carbide Ball Nose End Mill for Steel and Mold Steel
This HRC45–HRC65 2-flute solid carbide ball nose end mill is designed for
precision contouring and finishing of steel, alloy steel and mold steel.
- ◆Suitable for steel and mold steel from HRC45 to HRC65
- ◆2-flute geometry for smooth chip evacuation and stable cutting
- ◆Ball nose profile for precise 3D contouring and surface finishing
Consistent Quality
Consistent geometry across repeat orders.
유연한 주문
Small batches and mixed sizes available.
OEM Support
Custom marking, labels and packaging.
표준 및 맞춤형
Standard sizes and custom configurations.
HRC45–HRC65 2-Flute Solid Carbide Ball Nose End Mill Overview
This 2-flute solid carbide ball nose end mill series is designed for 3D contouring, cavity machining, profiling and surface finishing in steel from general HRC45 applications through selected hardened-steel conditions up to HRC65. The full-radius cutting profile follows curved and free-form surfaces, while the two-flute geometry provides chip space and lower cutting resistance for mold cavities and complex profiles. Carbide grade, edge preparation and coating should be matched to the actual workpiece hardness.
Key Configuration
Full-Radius Ball Nose
Maintains progressive cutting contact on curved surfaces, cavities, fillets and complex 3D profiles.
Two-Flute Geometry
Balances cutting-edge support with chip space for semi-finishing and finishing operations.
Hardness-Matched Tool Series
Carbide grade, edge preparation and coating can be selected for HRC45, HRC55, HRC60 or HRC65 application levels.
Key Product Advantages
Smooth 3D Toolpaths
The ball profile supports continuous contact when following curved and free-form surfaces.
Stable Chip Evacuation
Two flutes provide chip space without giving up the edge support required for steel finishing.
Wide Hardness Coverage
Separate series configurations support general, pre-hardened and selected hardened steels up to HRC65.
Standard & Long Reach
Multiple shank and overall-length combinations cover regular profiles and deeper cavity access.
Milling Operations
Mold Cavity Milling
Profile Milling
Semi-Finishing
Surface Finishing
Workpiece Material Compatibility
| MATERIAL GROUP | EXAMPLES | APPLICATION LEVEL |
|---|---|---|
| P Steel | Carbon steel and alloy steel | HRC45-series configuration |
| H Pre-Hardened Steel | Pre-hardened mold and die steel | HRC45–HRC55 configuration |
| H Hardened Steel | Selected hardened tool and mold steel | HRC60–HRC65 configuration |
Product Details & Milling Demonstration
Detailed product views and a machining demonstration of the HRC45–HRC65 2-flute solid carbide ball nose end mill series for steel.
Tool Nomenclature & Dimensions
Reference dimensional nomenclature and standard configurations for the HRC45–HRC65 2-flute solid carbide ball nose end mill series. All listed dimensions are in millimeters.
Technical Configuration
| TECHNICAL ITEM | SPECIFICATION |
|---|---|
| 도구 유형 | Solid carbide ball nose end mill |
| End Profile | Ball Nose / Full Radius |
| 플루트 수 | 플루트 2개 |
| Series Positioning | HRC45 / HRC55 / HRC60 / HRC65 Application Levels |
| 도구 재질 | Fine-Grain Solid Carbide; grade selected according to workpiece hardness |
| Coating Selection | Application-specific coating selected according to steel grade, hardness and cutting temperature |
| Primary Operations | 3D contouring, profiling, cavity machining, semi-finishing and finishing |
| Cutting Direction | Right-Hand Cutting |
| Coolant Method | Air Blow / Oil Mist / External Coolant According to Application |
Standard Size Matrix
Reference standard sizes retained from the original product information. Select by ball radius, flute length, shank diameter and overall length. Drawing-based non-standard sizes can be reviewed separately.
| SPECIFICATION | R | DC / D | APMX / L1 | DCON / d | OAL / L | FLUTES |
|---|---|---|---|---|---|---|
| R0.5×2×D4×50L | 0.5 | 1 | 2 | 4 | 50 | 2 |
| R0.75×3×D4×50L | 0.75 | 1.5 | 3 | 4 | 50 | 2 |
| R1×4×D4×50L | 1 | 2 | 4 | 4 | 50 | 2 |
| R1.25×5×D4×50L | 1.25 | 2.5 | 5 | 4 | 50 | 2 |
| R1.5×6×D3×50L | 1.5 | 3 | 6 | 3 | 50 | 2 |
| R1.5×6×D3×75L | 1.5 | 3 | 6 | 3 | 75 | 2 |
| R1.5×6×D3×100L | 1.5 | 3 | 6 | 3 | 100 | 2 |
| R1.5×6×D4×50L | 1.5 | 3 | 6 | 4 | 50 | 2 |
| R1.5×6×D6×50L | 1.5 | 3 | 6 | 6 | 50 | 2 |
| R1.75×7×D4×50L | 1.75 | 3.5 | 7 | 4 | 50 | 2 |
| R2×8×D4×50L | 2 | 4 | 8 | 4 | 50 | 2 |
| R2×8×D4×75L | 2 | 4 | 8 | 4 | 75 | 2 |
| R2×8×D4×100L | 2 | 4 | 8 | 4 | 100 | 2 |
| R2.5×10×D5×50L | 2.5 | 5 | 10 | 5 | 50 | 2 |
| R2.5×10×D5×75L | 2.5 | 5 | 10 | 5 | 75 | 2 |
| R2.5×10×D5×100L | 2.5 | 5 | 10 | 5 | 100 | 2 |
| R2.5×10×D6×50L | 2.5 | 5 | 10 | 6 | 50 | 2 |
| R3×12×D6×50L | 3 | 6 | 12 | 6 | 50 | 2 |
| R3×12×D6×75L | 3 | 6 | 12 | 6 | 75 | 2 |
| R3×12×D6×100L | 3 | 6 | 12 | 6 | 100 | 2 |
| R3×12×D6×150L | 3 | 6 | 12 | 6 | 150 | 2 |
| R3.5×14×D8×60L | 3.5 | 7 | 14 | 8 | 60 | 2 |
| R4×16×D8×60L | 4 | 8 | 16 | 8 | 60 | 2 |
| R4×16×D8×75L | 4 | 8 | 16 | 8 | 75 | 2 |
| R4×16×D8×100L | 4 | 8 | 16 | 8 | 100 | 2 |
| R4×16×D8×150L | 4 | 8 | 16 | 8 | 150 | 2 |
| R4.5×18×D10×75L | 4.5 | 9 | 18 | 10 | 75 | 2 |
| R5×20×D10×100L | 5 | 10 | 20 | 10 | 100 | 2 |
| R5×20×D10×150L | 5 | 10 | 20 | 10 | 150 | 2 |
| R5.5×22×D12×75L | 5.5 | 11 | 22 | 12 | 75 | 2 |
| R6×24×D12×75L | 6 | 12 | 24 | 12 | 75 | 2 |
| R6×24×D12×100L | 6 | 12 | 24 | 12 | 100 | 2 |
| R6×24×D12×150L | 6 | 12 | 24 | 12 | 150 | 2 |
| R7×28×D14×80L | 7 | 14 | 28 | 14 | 80 | 2 |
| R7×28×D14×100L | 7 | 14 | 28 | 14 | 100 | 2 |
| R7×28×D14×150L | 7 | 14 | 28 | 14 | 150 | 2 |
| R8×32×D16×100L | 8 | 16 | 32 | 16 | 100 | 2 |
| R8×32×D16×150L | 8 | 16 | 32 | 16 | 150 | 2 |
| R9×36×D18×100L | 9 | 18 | 36 | 18 | 100 | 2 |
| R9×36×D18×150L | 9 | 18 | 36 | 18 | 150 | 2 |
| R10×40×D20×100L | 10 | 20 | 40 | 20 | 100 | 2 |
| R10×40×D20×150L | 10 | 20 | 40 | 20 | 150 | 2 |
Recommended Starting Cutting Parameters
The values below are starting references from the original product information. Optimize them according to cutter diameter, effective cutting diameter on the ball profile, tool overhang, holder runout, machine rigidity and coolant conditions.
| WORKPIECE RANGE | VC (m/min) | FZ (mm/tooth) | AP | AE | REFERENCE USE |
|---|---|---|---|---|---|
| Steel & Alloy Steel — HRC45–HRC50 | 120-180 | 0.03–0.06 | 0.3–0.6 × D | 0.05–0.20 × D | Contouring / Semi-Finishing / Finishing |
| Hardened Steel — HRC55–HRC65 | 80–120 | 0.015–0.03 | 0.2–0.4 × D | 0.03–0.15 × D | Light Semi-Finishing / Finishing |
Ball Nose End Mill Application Guidance
- 3D Finishing: Select step-over according to the ball radius, required cusp height and target surface finish.
- Tool Center: Cutting speed approaches zero at the center of the ball; use suitable tool inclination or toolpath strategy where possible.
- Extended Reach: Reduce radial engagement and feed when using long overall lengths or increased tool overhang.
- Toolholding: Use a clean, low-runout precision holder and keep unnecessary overhang to a minimum.
- Series Selection: Confirm the workpiece grade and actual hardness before choosing the HRC45, HRC55, HRC60 or HRC65 configuration.
HRC45–HRC65 2-Flute Ball Nose End Mill Customization
Ball radius, cutting diameter, flute length, neck reach, overall length, carbide grade, cutting-edge preparation and coating can be configured for steel contour-milling applications. The HRC45, HRC55, HRC60 and HRC65 product levels use different substrate, edge and coating combinations rather than one universal geometry. Standard sizes are available for regular orders, while non-standard dimensions can be reviewed according to the workpiece grade, actual hardness, cavity depth, tool engagement and required surface finish.
| PARAMETER | MANUFACTURING CAPABILITIES |
|---|---|
| Hardness Series | HRC45, HRC55, HRC60 and HRC65 application levels available, with carbide grade, edge preparation and coating selected according to the actual workpiece hardness |
| Ball Radius & Cutting Diameter | Standard ball radii from R0.5 to R10, corresponding to Ø1–Ø20 mm cutting diameters; intermediate and drawing-defined sizes can be reviewed |
| 플루트 수 | Standard 2-flute configuration providing chip space and reduced cutting resistance for 3D contouring, cavity machining and profile finishing |
| 플루트 길이 | Standard or drawing-defined flute lengths selected according to the cutting diameter, machining depth, profile geometry and cutting load |
| Neck & Reach Configuration | Straight-neck and relieved-neck configurations can be reviewed for deep cavities, recessed profiles and restricted-access machining |
| 전체 길이 | Standard, long-series and drawing-defined overall lengths available, subject to tool-overhang and rigidity review |
| 섕크 구성 | Precision cylindrical shank with standard or drawing-defined shank diameter, clamping length and transition geometry |
| Ball-Nose Geometry | Full-radius cutting profile for 3D contours, mold cavities, fillets and curved surfaces, with ball-profile accuracy matched to the required surface finish |
| Carbide Grade | Fine-grain carbide grade selected to balance edge strength, rigidity and wear resistance across the HRC45–HRC65 application range |
| 엣지 준비 | Ball-end grinding and cutting-edge preparation can be adjusted according to workpiece hardness, finishing allowance, tool diameter and cutting load |
| Coating Selection | AlTiN, TiSiN, AlTiSiN or another application-specific coating can be selected according to steel hardness, cutting temperature and coolant conditions |
| Milling Application | Geometry can be reviewed for 3D contouring, mold cavity machining, profile milling, fillet machining, semi-finishing and surface finishing |
| Dimensional Tolerance | Drawing-defined requirements for ball radius, cutting diameter, flute length, neck diameter, shank diameter, overall length, runout and profile accuracy |
OEM 및 자체 브랜드 서비스
OEM manufacturing and private-label supply options are available for industrial distributors, tooling brands and repeat-production customers. Laser identification, label content, protective packaging and coating presentation can be configured according to the approved product specification and order requirements.
Laser Etching
Custom logos, tool codes, cutting dimensions, coating identification and batch numbers can be marked according to the available shank area.
Custom Labels & Packaging
Individual protective tubes, product labels, specification details, colored packaging tubes and private-label packaging can be reviewed.
Commercial Terms
MOQ, sample evaluation, custom-size trials, repeat orders and scheduled supply programs are confirmed according to the selected configuration.
Technical Workflow
A structured review process is used to confirm standard, customized and private-label square end mill requirements before production.
Inquiry
Submit the material, hardness, milling operation, dimensions, tolerance and quantity.
Engineering
Review flute geometry, helix angle, edge preparation, coating, ap and ae.
Commercial
Confirm quotation, MOQ, sample requirements, production schedule and delivery terms.
Production
CNC grinding, end-face formation, edge preparation, coating and laser marking.
Quality Control
Inspect diameter, flute length, shank, runout, square-end geometry and cutting edges.
Quality, Inspection & Delivery
Our solid carbide square end mills are controlled through material verification, precision grinding, in-process measurement and final inspection. Key dimensions, square-end geometry, cutting-edge condition, coating appearance and product identification are reviewed according to the approved specification or drawing before packing.
Three-Stage Quality Control
Inspection checkpoints are arranged around the manufacturing process to support dimensional consistency and repeat-order control.
Incoming Material Control
Carbide substrate grade, blank dimensions and supplied material information are checked against the production requirement.
In-Process Grinding Control
Cutting diameter, flute geometry, flute length, square-end profile and shank dimensions are monitored during CNC grinding.
Final Tool Inspection
Finished tools are reviewed for specified dimensions, runout, cutting-edge condition, coating appearance, marking and packing identification.
Key Inspection Characteristics
Inspection requirements are confirmed according to the standard product specification or the approved custom drawing.
| INSPECTION ITEM | CONTROL FOCUS | CONFIRMATION BASIS |
|---|---|---|
| Cutting Diameter (DC) | Diameter and dimensional consistency | Standard specification or approved drawing |
| Flute Length (APMX) | Effective cutting length | Confirmed product size or drawing requirement |
| Shank Diameter (DCON) | Clamping-section dimension and surface condition | Applicable shank specification |
| Overall Length (OAL) | Total tool length | Standard size matrix or approved drawing |
| Radial Runout | Concentricity between cutting section and shank | Agreed inspection requirement |
| Square-End Geometry | End-face profile, corner condition and center-cutting form | Selected tool configuration |
| Flute & Helix Profile | Flute count, helix form and grinding consistency | Approved manufacturing configuration |
| Cutting Edge & Coating | Edge condition, visible defects and coating appearance | Application-specific production requirement |
| Marking & Identification | Tool code, dimensions and batch information where applicable | Confirmed order and packaging specification |
Measurement & Batch Traceability
Optical measuring systems, tool inspection equipment and appropriate dimensional gauges are selected according to the feature being checked.
Optical Measurement
Profile and dimensional review of specified cutting features.
Runout Verification
Concentricity review based on the agreed product requirement.
Edge Inspection
Magnified review of the end face, corners and cutting-edge condition.
Batch Identification
Order, product and batch information are linked where required for repeat supply.
Protective Packaging Process
Finished end mills are protected to reduce contact between cutting edges and to support clear product identification during storage and transportation.
Bulk-Order & Export Packaging
Bulk shipments can be arranged with reinforced cartons, protective wrapping, palletized loading or export cases according to order quantity, shipment weight and agreed transportation requirements.
Delivery Coordination
Production completion, packing method and dispatch arrangements are confirmed according to the approved order. Courier, air, sea or customer-designated shipping options can be reviewed according to shipment size and destination. Final lead time is confirmed after product specifications, quantity and packaging requirements are approved.
Product & Application FAQs
Answers to common questions about selecting and applying the HRC45–HRC65 2-Flute Solid Carbide Ball Nose End Mill for Steel and Mold Steel.
What materials is this ball nose end mill designed to machine?
What operations are suitable for the ball-nose profile?
How should step-over be selected for surface finishing?
Can the tool cut at the center of the ball nose?
What affects ball-radius and profile accuracy?
Why choose a 2-flute ball nose for steel machining?
Ordering & Customization FAQs
Information for distributors, tooling brands and customers requesting standard or application-specific ball-nose configurations.
What standard sizes are available?
Can non-standard dimensions or geometry be manufactured?
Are OEM marking and private-label packaging available?
What information is required for an accurate quotation?
Technical Downloads
Use the following references for product selection and starting cutting-data review.
Solid Carbide End Mill Catalog
Review related ball-nose, square-end, corner-radius and application-specific end mill series.
End Mill Speeds & Feeds Guide
Access reference starting parameters for application review and controlled machining trials.
Need a Size or Application Review?
Send the steel grade and verified hardness, required dimensions, machining operation and quantity for configuration and quotation review.
Need Sizes, Pricing or Custom Options?
Send us the required tool type, sizes, quantities, workpiece material and any OEM or custom requirements. We will confirm suitable specifications, availability, lead time and quotation details.
Drawings, size lists and reference photos are welcome.
