수지 결합 세라믹 및 복합재용 맞춤형 장플루트 초경 마이크로 드릴
Resin-Bonded Ceramics
Material Focus
Long Flutes
확장된 도달 범위
사용자 정의 형상
Micro-Hole Precision
솔리드 카바이드
가장자리 강성
Custom Long-Flute Micro Drill Overview
Drawing-based solid carbide micro drills for resin-bonded ceramics, ceramic-filled polymers and selected composites. Geometry, coating and flute finish are reviewed for the actual material composition and hole requirements.
주요 구성
Ø0.40 mm Reference Diameter
A drawing-specific micro-hole configuration, with other diameters available for review.
10 mm Long-Flute Section
Extended access for recessed features. Confirm usable drilling depth and chip clearance separately.
4 mm Cylindrical Shank
Provides a stable clamping interface behind the delicate cutting section.
Custom Design & Product Details

Drawing-Based Dimensions
Diameter, flute length, shank and overall length matched to the component drawing.

Carbide & Clamping Support
Fine-grain carbide and a larger shank support the custom micro-drill configuration.

Material-Specific Geometry
Point, edge preparation and flute finish reviewed for abrasion, resin adhesion and exit-edge quality.

OEM & Repeat Supply
Confirmed designs can use dedicated item codes, marking and protective packaging for repeat orders.
재료 호환성
| 재료 | Selection Focus | 애플리케이션 |
|---|---|---|
| Resin-Bonded Ceramics | Ceramic phase, resin content and hole requirements | Primary reference |
| Ceramic-Filled Polymers | Filler content, abrasiveness and resin behavior | Application review |
| Fiber / Layered Composites | Layer stack, fiber direction and exit quality | Trial recommended |
Confirm geometry, coating and cutting conditions for the exact composition. This reference design is not a universal ceramic-drilling solution.
Applications & Selection
- Drawing-specific micro holes in resin-bonded ceramic and filled-polymer parts.
- Selected fiber-reinforced and layered composite components.
- Recessed features requiring extended micro-drill access.
Provide the material composition, hole diameter, depth, tolerance and machine conditions for design review.
Custom Micro Drill Dimensions
Reference configuration for a long-flute solid carbide micro drill for resin-bonded ceramics and selected composites. Other dimensions are reviewed from your drawing.
Reference size: D0.40 × L1 10 × d4 × L50 mm. Flute length does not equal usable drilling depth.
Material & Application Review
- Confirm resin system, ceramic filler, layer stack or fiber direction.
- Specify hole diameter, depth, tolerance and exit-edge requirements.
- Match point geometry, flute finish, coolant and cutting data to the workpiece and machine setup.
Fully sintered alumina, zirconia and silicon carbide require separate review. Suitability is not implied by this reference configuration.
사이즈, 가격 또는 맞춤 제작 옵션이 필요하신가요?
Send your drawing, material composition, hole requirements and quantity for design review and quotation.
견적 요청하기검사 및 품질 관리
Custom micro drills are checked for dimensions, runout, point geometry, cutting edges and specified surface treatment against the approved drawing.
보호 포장
Individual protection and verified labels help safeguard delicate micro drills. OEM packaging is available for review.
개인 보호
배치 및 라벨 검사
수출 포장
납기 및 배송
Custom orders: Lead time confirmed after drawing, quantity, coating and packaging approval.
배송: 주문 규모와 목적지에 따라 특송, 항공, 해상 또는 귀하가 지정한 포워더를 통해 배송됩니다.
제품 자주 묻는 질문
Product-specific information about long-flute micro drilling, material applications, custom dimensions and machining requirements for resin-bonded ceramics and composite materials.
What materials is this long-flute micro drill designed for?
This drill is intended for resin-bonded ceramic materials, reinforced composites and other application-specific non-metallic materials requiring small-diameter hole machining. Final suitability should be confirmed according to the exact material composition, abrasiveness, hole depth and required hole quality.
Why is a long-flute configuration used for this micro drill?
The extended flute length provides additional reach for deeper small holes and components where a standard micro-drill flute length is insufficient. The required flute length should be matched to the actual hole depth while keeping the tool as rigid as practical.
What diameters and lengths are available?
This product is supplied primarily as a custom micro-drill configuration. Cutting diameter, flute length, neck or reach length, shank diameter and overall length can be reviewed according to the required hole dimensions or customer drawing.
What should be considered for chip and dust evacuation?
Chip and fine-particle evacuation becomes more important as the micro-hole depth and flute length increase. Air, suitable coolant or application-specific evacuation methods should be selected according to the material behavior, machine setup and contamination requirements.
Can the geometry and coating be customized for abrasive composite materials?
Yes. Point geometry, flute form, edge preparation, flute length and coating can be reviewed according to the material composition, abrasiveness, hole depth and required surface quality. The final configuration should be confirmed before production.
견적서를 받기 위해서는 어떤 정보가 필요한가요?
Please provide the required cutting diameter, hole depth, flute or reach length, workpiece material, shank requirement and estimated quantity. A drawing or dimensional sketch is strongly recommended for long-flute micro drills and other non-standard configurations.
주문 및 OEM 관련 자주 묻는 질문
시범 주문, 혼합 사이즈 구매, 자체 브랜드 제품 제작 및 생산 일정 수립에 관한 일반 정보.
소량의 시험 주문을 받아주시나요?
Yes. Small sample or trial orders are welcomed for application testing and performance evaluation before moving to volume purchasing.
Can mixed diameters and lengths be ordered together?
Yes. Different micro-drill diameters and length configurations can be combined in one order when the production and coating requirements are compatible. Mixed-size purchasing is suitable for distributors, trial programs and application testing.
OEM 레이저 마킹 서비스가 제공되나요?
Yes. Custom shank laser marking such as logo, model number, specifications or batch identification can be reviewed together with OEM labels and packaging requirements.
일반적인 생산 소요 기간은 얼마나 되나요?
Custom long-flute micro drills normally require additional production time for dimensional confirmation, grinding and inspection. The final schedule is confirmed according to diameter, geometry, quantity, coating and current production capacity.
사이즈, 가격 또는 맞춤 제작 옵션이 필요하신가요?
견적 요청을 위해 사양과 수량을 보내주십시오.
- 표준 크기
- 소액 재판 명령
- 다양한 사이즈
- OEM 및 맞춤형 제작
QR 코드 보기 – 위챗으로 영업팀에 문의하기
위챗으로 문의하시려면 QR 코드를 스캔하세요.
위챗
위챗으로 문의하시려면 QR 코드를 스캔하세요.





