Mũi khoan hợp kim nguyên khối đường kính nhỏ, lưỡi dài theo yêu cầu, cho gốm liên kết nhựa & Composite
Resin-Bonded Ceramics
Material Focus
Long Flutes
Extended Reach
Hình học tùy chỉnh
Micro-Hole Precision
Carbide nguyên khối
Edge Rigidity
Custom Long-Flute Micro Drill Overview
Drawing-based solid carbide micro drills for resin-bonded ceramics, ceramic-filled polymers and selected composites. Geometry, coating and flute finish are reviewed for the actual material composition and hole requirements.
Cấu hình chính
Ø0.40 mm Reference Diameter
A drawing-specific micro-hole configuration, with other diameters available for review.
10 mm Long-Flute Section
Extended access for recessed features. Confirm usable drilling depth and chip clearance separately.
4 mm Cylindrical Shank
Provides a stable clamping interface behind the delicate cutting section.
Custom Design & Product Details

Drawing-Based Dimensions
Diameter, flute length, shank and overall length matched to the component drawing.

Carbide & Clamping Support
Fine-grain carbide and a larger shank support the custom micro-drill configuration.

Material-Specific Geometry
Point, edge preparation and flute finish reviewed for abrasion, resin adhesion and exit-edge quality.

OEM & Repeat Supply
Confirmed designs can use dedicated item codes, marking and protective packaging for repeat orders.
Material Compatibility
| Chất liệu | Selection Focus | Ứng dụng |
|---|---|---|
| Resin-Bonded Ceramics | Ceramic phase, resin content and hole requirements | Primary reference |
| Ceramic-Filled Polymers | Filler content, abrasiveness and resin behavior | Application review |
| Fiber / Layered Composites | Layer stack, fiber direction and exit quality | Trial recommended |
Confirm geometry, coating and cutting conditions for the exact composition. This reference design is not a universal ceramic-drilling solution.
Applications & Selection
- Drawing-specific micro holes in resin-bonded ceramic and filled-polymer parts.
- Selected fiber-reinforced and layered composite components.
- Recessed features requiring extended micro-drill access.
Provide the material composition, hole diameter, depth, tolerance and machine conditions for design review.
Custom Micro Drill Dimensions
Reference configuration for a long-flute solid carbide micro drill for resin-bonded ceramics and selected composites. Other dimensions are reviewed from your drawing.
Reference size: D0.40 × L1 10 × d4 × L50 mm. Flute length does not equal usable drilling depth.
Material & Application Review
- Confirm resin system, ceramic filler, layer stack or fiber direction.
- Specify hole diameter, depth, tolerance and exit-edge requirements.
- Match point geometry, flute finish, coolant and cutting data to the workpiece and machine setup.
Fully sintered alumina, zirconia and silicon carbide require separate review. Suitability is not implied by this reference configuration.
Bạn cần biết thông tin về kích cỡ, giá cả hoặc các tùy chọn đặt hàng theo yêu cầu?
Send your drawing, material composition, hole requirements and quantity for design review and quotation.
Yêu cầu báo giá OEMInspection & Quality Control
Custom micro drills are checked for dimensions, runout, point geometry, cutting edges and specified surface treatment against the approved drawing.
Bao bì bảo vệ
Individual protection and verified labels help safeguard delicate micro drills. OEM packaging is available for review.
Bảo vệ cá nhân
Batch & Label Checks
Export Packing
Thời gian giao hàng & Vận chuyển
Custom orders: Lead time confirmed after drawing, quantity, coating and packaging approval.
Shipping: Express, air, sea or your nominated forwarder, according to order size and destination.
Câu hỏi thường gặp về sản phẩm
Product-specific information about long-flute micro drilling, material applications, custom dimensions and machining requirements for resin-bonded ceramics and composite materials.
What materials is this long-flute micro drill designed for?
This drill is intended for resin-bonded ceramic materials, reinforced composites and other application-specific non-metallic materials requiring small-diameter hole machining. Final suitability should be confirmed according to the exact material composition, abrasiveness, hole depth and required hole quality.
Why is a long-flute configuration used for this micro drill?
The extended flute length provides additional reach for deeper small holes and components where a standard micro-drill flute length is insufficient. The required flute length should be matched to the actual hole depth while keeping the tool as rigid as practical.
What diameters and lengths are available?
This product is supplied primarily as a custom micro-drill configuration. Cutting diameter, flute length, neck or reach length, shank diameter and overall length can be reviewed according to the required hole dimensions or customer drawing.
What should be considered for chip and dust evacuation?
Chip and fine-particle evacuation becomes more important as the micro-hole depth and flute length increase. Air, suitable coolant or application-specific evacuation methods should be selected according to the material behavior, machine setup and contamination requirements.
Can the geometry and coating be customized for abrasive composite materials?
Yes. Point geometry, flute form, edge preparation, flute length and coating can be reviewed according to the material composition, abrasiveness, hole depth and required surface quality. The final configuration should be confirmed before production.
Cần những thông tin nào để lập báo giá?
Please provide the required cutting diameter, hole depth, flute or reach length, workpiece material, shank requirement and estimated quantity. A drawing or dimensional sketch is strongly recommended for long-flute micro drills and other non-standard configurations.
Câu hỏi thường gặp về đặt hàng và OEM
General information for trial orders, mixed-size purchasing, private labeling and production scheduling.
Do you accept small trial orders?
Yes. Small sample or trial orders are welcomed for application testing and performance evaluation before moving to volume purchasing.
Can mixed diameters and lengths be ordered together?
Yes. Different micro-drill diameters and length configurations can be combined in one order when the production and coating requirements are compatible. Mixed-size purchasing is suitable for distributors, trial programs and application testing.
Is OEM laser marking available?
Yes. Custom shank laser marking such as logo, model number, specifications or batch identification can be reviewed together with OEM labels and packaging requirements.
What is the typical production lead time?
Custom long-flute micro drills normally require additional production time for dimensional confirmation, grinding and inspection. The final schedule is confirmed according to diameter, geometry, quantity, coating and current production capacity.
Bạn cần biết thông tin về kích cỡ, giá cả hoặc các tùy chọn đặt hàng theo yêu cầu?
Vui lòng gửi thông số kỹ thuật và số lượng để nhận báo giá.
- Kích thước tiêu chuẩn
- Các lệnh xét xử sơ thẩm nhỏ
- Các kích cỡ khác nhau
- OEM & Dụng cụ theo yêu cầu
Xem mã QR – Liên hệ bộ phận bán hàng qua WeChat
Quét mã để liên hệ với chúng tôi trên WeChat.
Quét mã để liên hệ với chúng tôi trên WeChat.





