HRC55, End Mill Karbida Padat 4-Flute dengan Lapisan TiSiN untuk Baja, dengan Radius Sudut
4-flute TiSiN-coated carbide corner radius end mills for stable steel milling, improved edge strength and reduced corner chipping.
Reinforced Corner Radius
Reduces edge chipping
Stable 4-Flute Milling
Consistent steel cutting
TiSiN Wear Protection
Heat and wear resistance
HRC55 Steel Applications
For steels up to HRC55
HRC55 4-Flute TiSiN-Coated Corner Radius End Mill Overview
The HRC55 4-flute TiSiN-coated solid carbide corner radius end mill dirancang untuk steel side milling, profiling and semi-finishing. Rounded cutting corners help reduce corner chipping, while the Lapisan TiSiN supports heat and wear resistance.
Konfigurasi Utama
Memotong Geometri
4
SERULING
Stable 4-Flute Milling
Four cutting edges support stable steel profiling and semi-finishing.
Geometri Akhir
R
CORNER
Reinforced Corner Radius
Rounded corners improve edge strength and help reduce chipping.
TiSiN
Heat-Resistant Coating
TiSiN coating supports ketahanan terhadap panas dan keausan in steel milling.
Detail Desain
Precision-ground corner radii, optimized 4-flute geometry and edge preparation support accurate profiling, efficient chip removal and cutting-edge durability. TiSiN coating provides heat and wear protection for stable steel milling.
Proses Penggilingan
Suitable for steel side milling, pocket milling, contouring and semi-finishing.
Penggilingan SampingDirekomendasikan
Contour MillingDirekomendasikan
Pocket MillingCocok
Semi-FinishingCocok
Catatan Pemilihan: Match the tool corner radius to the part fillet. Confirm machining conditions according to steel hardness and tool size.
Bahan Bahan Baku yang Direkomendasikan
| ISO | Kelompok Bahan | Bahan-bahan Umum | Kesesuaian |
|---|---|---|---|
| P | Baja Karbon | General carbon and structural steels | Sekolah Dasar |
| P | Baja Paduan | Selected low- and medium-alloy steels | Sekolah Dasar |
| P | Tool & Mold Steel | Selected tool and mold steels | Confirm Grade |
| H | Baja yang Telah Diperkeras | Selected pre-hardened mold steels | Peninjauan Aplikasi |
Material Note: HRC55 is the tool-series positioning. Confirm the steel grade, actual hardness and cutting conditions before selection.
Product Details & Milling Demonstration
TiSiN-Coated Corner Radius End Mill product views of the HRC55 4-flute AlTiN-coated carbide corner radius end mill for steel.
HRC55 Corner Radius End Mill Specifications
Technical specifications for the HRC55 4-flute TiSiN-Coated Corner Radius End Mill for steel milling.
| PARAMETER | SPESIFIKASI |
|---|---|
| Jenis Alat | Solid Carbide Corner Radius End Mill |
| Hardness Series | HRC55 |
| Substrat | Karbida Padat Butiran Halus |
| Memotong Geometri | 4 Flutes / Corner Radius |
| Pelapisan | TiSiN |
| Helix Options | 30° / 35° / 45° — By Configuration |
| Diameter Pemotongan | Ø1–Ø12 mm — Reference Sizes |
| Aplikasi | Steel Profiling, Side Milling & Semi-Finishing |
Corner Radius End Mill Sizes
Metric sizes for 4-flute carbide corner radius end mills, including cutting diameter, corner radius, shank diameter and overall length. All dimensions in mm.
Scroll to view the complete size range. Confirm dimensions and availability before ordering.
| SPESIFIKASI | DC | R | DCON | OAL |
|---|---|---|---|---|
| Ø1 × R0,2 × D4 × 50L | 1 | 0.2 | 4 | 50 |
| Ø1,5 × R0,2 × D4 × 50L | 1.5 | 0.2 | 4 | 50 |
| Ø2×R0,2 / R0,3 / R0,5×D4×50L | 2 | 0.2 / 0.3 / 0.5 | 4 | 50 |
| Ø2,5 × R0,2 / R0,5 × D4 × 50L | 2.5 | 0.2 / 0.5 | 4 | 50 |
| Ø3×R0.2 / R0.5×D3×50L | 3 | 0.2 / 0.5 | 3 | 50 |
| Ø3×R0.2 / R0.3 / R0.5 / R1×D4×50L | 3 | 0.2 / 0.3 / 0.5 / 1 | 4 | 50 |
| Ø4×R0,2 / R0,3 / R0,5 / R1×D4×50L | 4 | 0.2 / 0.3 / 0.5 / 1 | 4 | 50 |
| Ø5 × R0,5 / R1 × D6 × 50L | 5 | 0.5 / 1 | 6 | 50 |
| Ø6×R0,2 / R0,3 / R0,5 / R1×D6×50L | 6 | 0.2 / 0.3 / 0.5 / 1 | 6 | 50 |
| Ø6×R0,2 / R0,5 / R1×D8×60L | 6 | 0.2 / 0.5 / 1 | 8 | 60 |
| Ø8 × R1,5 / R2 × D8 × 60L | 8 | 1.5 / 2 | 8 | 60 |
| Ø10×R0,5 / R1 / R1,5 / R2 / R3×D10×75L | 10 | 0.5 / 1 / 1.5 / 2 / 3 | 10 | 75 |
| Ø12×R0,5 / R1 / R2 / R3×D12×75L | 12 | 0.5 / 1 / 2 / 3 | 12 | 75 |
Catatan: Reference dimensions only. Confirm the required radius, flute length and stock availability before ordering.
Custom Corner Radius End Mills
Custom cutting diameters, corner radii, flute lengths, shank sizes, overall lengths and OEM marking are available for TiSiN-coated carbide end mills, subject to drawing review.
Need HRC55 Corner Radius End Mills?
Send your steel grade, cutting diameter, corner radius, tool length and quantity for selection and quotation.
TiSiN-Coated Corner Radius End Mill Customization
Custom cutting diameters, corner radii, flute lengths, helix angles, shank sizes and overall lengths are available to meet your requirements.
OEM & Merek Pribadi
Custom laser marking, product labels and branded packaging are available. See our Layanan OEM & Merek Pribadi.
Kualitas, Pemeriksaan, dan Pengiriman
Our solid carbide square end mills undergo material verification, precision grinding and final inspection to ensure consistent dimensions, cutting-edge quality and coating finish.
TiSiN-Coated Corner Radius End Mill FAQs
Common questions about TiSiN-coated 4-flute carbide corner radius end mills for steel milling, tool selection and ordering.
What steels can this HRC55 corner radius end mill machine?
Can this carbide end mill machine steel up to HRC55?
What is the difference between a corner radius and a square end mill?
How do I choose the correct corner radius (R)?
Why choose a 4-flute TiSiN-coated corner radius end mill?
What milling operations are suitable for this tool?
Sizes & Ordering FAQs
Size selection, custom carbide end mills and OEM supply for distributors and importers.
What HRC55 corner radius end mill sizes are available?
Can I order custom corner radii and non-standard dimensions?
Are samples, mixed-size orders and OEM branding available?
Informasi apa saja yang diperlukan untuk mendapatkan penawaran harga?
Unduhan Teknis
Product catalog and starting cutting data for carbide end mill selection.
Katalog End Mill Karbida Padat
Browse related end mills, coatings and sizes.
Panduan Kecepatan dan Laju Pemotongan End Mill
Reference starting milling parameters.
Butuh informasi mengenai ukuran, harga, atau opsi khusus?
Kirimkan spesifikasi dan jumlah pesanan Anda untuk mendapatkan penawaran harga.
- Ukuran Standar
- Perintah Persidangan Kecil
- Ukuran Campuran
- OEM & Pesanan Khusus
Lihat Kode QR – Hubungi Tim Penjualan di WeChat
Pindai kode ini untuk menghubungi kami di WeChat.
Pindai kode ini untuk menghubungi kami di WeChat.
