Dao tiện rãnh sâu mặt đầu hợp kim nguyên khối MVR

MVR solid carbide micro face grooving bars with dual coolant holes for deep, recessed grooves in small bores. Standard, custom and OEM options available.
Tool Material:Carbide nguyên khối
Chiều rộng rãnh:2.0 / 2.5 / 3.0 / 4.0 mm
Minimum Bore:Ø12 / Ø16 mm
Đường kính thân:Ø6 / Ø8 mm
Working Length:10 / 15 / 22 mm
Tùy chọn tùy chỉnh:Dimensions / Coolant Layout / Marking
Giao hàng tiêu chuẩn1–3 ngày làm việc
OEM & Dụng cụ theo yêu cầuBản vẽ / Mẫu
Số lượng đặt hàng tối thiểuMOQ 10 Pieces
TỐT NHẤT DÀNH CHO

Deep-Groove Access

Dual Coolant Holes

Độ cứng của vật liệu cacbua nguyên khối

Custom Sizes & OEM

Dao tiện rãnh sâu mặt đầu hợp kim nguyên khối MVR

MVR micro deep face grooving bars are designed for recessed end-face grooves in small-bore components. The extended cutting profile provides access to deeper groove positions, while dual coolant holes direct coolant toward the cutting zone to support chip removal.

Micro internal tooling series — product display

Deep-Groove Access & Chip Control

Extended Cutting Profile

Reaches recessed face-groove positions where shorter profiles lack access.

Directed Coolant

Dual outlets bring coolant closer to the edge to help limit chip packing and heat buildup.

Solid Carbide Body

Provides rigidity for small-bore grooving with controlled tool overhang.

Precision-Ground Edge

Supports groove-width control and consistent profile finishing.

Small-Bore Face Grooving Applications

  • Deep annular grooves on recessed internal end faces.
  • Sleeves, bushings and precision housings with restricted access.
  • CNC-turned components requiring matched groove width and reach.

Phù hợp nhất cho: Small-bore face grooves requiring deeper access and directed coolant.

Không phù hợp với: Bore-wall grooving, threading or general boring without a separately matched cutting geometry.

Tool Structure & Clearance

Match groove width, axial groove depth, inner and outer groove diameters, minimum bore size and working reach. Confirm clearance and coolant connection for the selected model.

MVR deep face grooving bar cutting profile, reach and coolant-hole structureMVR micro deep face grooving tool geometry and coolant features

Vật liệu phôi

Configurations can be reviewed for carbon steel, alloy steel, stainless steel, cast iron and selected aluminum or copper alloys. Match edge preparation, coating and coolant conditions to material grade and groove geometry.

Micro internal tooling material-selection reference

Series material reference; confirm the selected MVR configuration separately.

MVR Cutting Profile & Product Details

MVR solid carbide micro deep face grooving barMVR face grooving bar cutting edge and dual coolant outlets

MVR micro internal tool coating configuration reference

MVR solid carbide micro internal tooling models

Custom Deep Face Grooving Tools

Groove width, cutting depth, reach, shank, coolant-hole layout and coating can be reviewed from component drawings. Laser marking and private-label packaging are available for OEM orders.

Micro internal tooling applications for grooving, boring, profiling and threading

MVR Deep Face Grooving Bar Specifications

Kích thước tham khảo cho MVR solid carbide micro deep face grooving bars. Match groove geometry, bore clearance, working reach and coolant connection to the selected model.

MVR micro deep face grooving bar dimensions and available sizes

Key Selection Parameters

Groove Width & Depth Match finished width, axial depth, corner profile and tolerance.
Groove Diameter Range Confirm inner and outer groove diameters against tool clearance.
Minimum Bore & Access Check head, neck and holder clearance throughout the tool path.
Working Reach Select the shortest length that reaches the recessed end face.
Shank & Holder Confirm clamping size, tool orientation and mounting space.
Coolant Supply Verify connection, filtration and flow through both coolant outlets.

Setup & Custom Options

Keep overhang short and confirm center height, cutting direction and coolant delivery. Select speed and feed according to material, groove diameter, depth and tool configuration.

Custom widths, reach, shanks, cutting geometry and coolant layouts can be reviewed from drawings, with coating and OEM options available.

Related Face Grooving Series

Bạn cần biết thông tin về kích cỡ, giá cả hoặc các tùy chọn đặt hàng theo yêu cầu?

Send your groove drawing, bore size, workpiece material and quantity for MVR tool selection and quotation.

MVR Deep Face Grooving Bar Customization

Tùy chỉnh MVR micro deep face grooving bars can be reviewed for groove width, cutting depth, reach, shank size and coolant layout, with OEM branding for distributors and tooling suppliers.

Solid carbide micro internal tooling series for OEM supply

Xây dựng thương hiệu OEM và tài liệu hướng dẫn

Khắc laser

Logos, model codes and size identification, subject to available shank space.

Custom laser marking for micro internal tool shanks

Bao bì mang nhãn hiệu riêng

Branded labels and protective packaging for reseller and repeat orders.

Private-label packaging options for micro internal tooling

Bản vẽ và Thông số kỹ thuật

Confirmed tool dimensions and product information for selection and reordering.

Tài liệu tham khảo bản vẽ dụng cụ gia công vi mô tùy chỉnh

Quy trình đặt hàng theo yêu cầu

Application review → Drawing approval → Sample evaluation where required → Production & inspection.

Custom cutting tool design, production and inspection process

Đối với các yêu cầu tùy chỉnh: Send the groove drawing, bore size, workpiece material, coolant setup, quantity and branding requirements.

MVR Grooving Bar Quality & Delivery

Material verification, grinding control and final inspection check MVR deep face grooving bars so với các thông số kỹ thuật đã được xác nhận hoặc bản vẽ đã được phê duyệt.

Kiểm tra kích thước và kiểm tra tiên tiến đối với dụng cụ cacbua

Các điểm kiểm tra chính

  • Chất liệu: Loại cacbua và thông số kỹ thuật của phôi.
  • Kích thước: Cutting width, head and neck geometry, reach and shank size.
  • Cutting edges: Profile, edge condition and grinding finish.
  • Coolant features: Hole layout and outlet condition against the drawing.
  • Order details: Model, marking and packaging identification.

Inspection and batch-record requirements are confirmed with the order.

Bao bì bảo vệ

Individual protection, size identification and export packing help protect cutting edges during storage and transport.

HY solid carbide micro internal tooling seriesIndividual cutting tool protection and packaging process Export packing options for carbide cutting tools

Thời gian giao hàng & Vận chuyển

Các công cụ tiêu chuẩn: Thông thường từ 1–3 ngày làm việc, tùy thuộc vào tình trạng hàng tồn kho.

Các công cụ tùy chỉnh: Lead time confirmed by geometry, quantity, coating and production requirements.

Thông tin tham khảo về vận chuyển và thanh toán của HY Cutting Tools

MVR Micro Deep Face Grooving Bar FAQs

When should I choose an MVR deep face grooving bar?
Choose MVR for recessed annular grooves on internal end faces where deeper access and directed coolant are required. Bore-wall grooves require a suitable radial grooving tool.
Which MVR sizes fit a Ø12 mm or Ø16 mm bore?

Ø12 mm minimum bore: Ø6 mm shank models with 2.0 or 2.5 mm groove widths.

Ø16 mm minimum bore: Ø8 mm shank models with 3.0 or 4.0 mm groove widths.

These reference limits do not establish full clearance. Confirm groove diameters, head geometry, holder space and the complete tool path.

How do I select working length and allowable groove depth?
Ø6 mm shank models offer 10, 15 or 22 mm working lengths with 50 mm overall length. Ø8 mm models offer 15 or 22 mm working lengths with 60 mm overall length. Choose the shortest reach that provides access; working length is not the allowable groove depth, which must be checked against the tool drawing.
What do the dual coolant holes do during deep face grooving?
They direct coolant toward the cutting zone to help clear chips and limit heat buildup in recessed grooves. Confirm holder connection, coolant flow and filtration for the selected model.

Custom Orders & Supply

Can MVR groove widths, reach and coolant layouts be customized?
Yes. Cutting width, profile, reach, shank dimensions and coolant layout can be reviewed from drawings or samples. Coating, laser marking and private-label packaging are also available by order.
Số lượng đặt hàng tối thiểu (MOQ) là bao nhiêu, và tôi có thể đặt hàng các kích cỡ khác nhau không?
The standard MOQ is 10 pieces. Mixed-model orders can be reviewed according to the selected sizes and available stock. Include your required model quantities when requesting pricing.
What information is needed for a quotation and lead time?
Send the model and quantity, or a drawing showing bore size, groove width, axial depth, groove diameters and access length. Include workpiece material and coolant setup. Stock tools typically dispatch within 1–3 working days; custom lead time is confirmed after specification review.

Catalog & Selection Resources

Bạn cần biết thông tin về kích cỡ, giá cả hoặc các tùy chọn đặt hàng theo yêu cầu?

Vui lòng gửi thông số kỹ thuật và số lượng để nhận báo giá.

  • Kích thước tiêu chuẩn
  • Các lệnh xét xử sơ thẩm nhỏ
  • Các kích cỡ khác nhau
  • OEM & Dụng cụ theo yêu cầu
Xem mã QR – Liên hệ bộ phận bán hàng qua WeChat
Mã QR WeChat của HY Cutting Tools

Quét mã để liên hệ với chúng tôi trên WeChat.

Yêu cầu thông tin về sản phẩm HY

WeChat

Mã QR WeChat của HY Cutting Tools

Quét mã để liên hệ với chúng tôi trên WeChat.