Dao tiện biên dạng trong lỗ nhỏ hợp kim nguyên khối MQR

MQR 47° solid carbide micro bars for small-bore profiling and boring, with Ø2.9–Ø7.9 mm cutting diameters and custom/OEM options.
Chất nền:Cacbua rắn hạt mịn
Profiling Angle: 47°
Đường kính cắt:Ø2.9–Ø7.9 mm
Tip Radius:R0,05–R0,40 mm
Chiều dài thông thoáng:9–25 mm
Đường kính thân:Ø4 / Ø5 / Ø6 / Ø8 mm
Giao hàng tiêu chuẩn1–3 ngày làm việc
OEM & Dụng cụ theo yêu cầuBản vẽ / Mẫu
Số lượng đặt hàng tối thiểuSố lượng đặt hàng tối thiểu (MOQ): 3–10 chiếc
TỐT NHẤT DÀNH CHO

Phân tích nội bộ

Small-Bore Access

Carbide nguyên khối

Sản phẩm theo yêu cầu & OEM

MQR Micro Internal Profiling & Boring Bars

MQR solid carbide micro internal profiling bars are designed for compound contours, bore finishing and shoulder transitions in small-diameter components. The 47° cutting-head geometry supports internal contour turning and chamfering where the profile and toolpath provide sufficient clearance.

Dòng dụng cụ gia công bên trong cỡ nhỏ — trưng bày sản phẩm.

Designed for Compound Internal Profiles

47° Profiling Geometry

An angled cutting head for internal contours, shoulders and transitions.

Profiling & Boring Capability

Combines bore finishing and profile machining where the selected geometry permits.

Rigid Carbide Construction

A one-piece body with radius and reach options matched to the component.

Small-Bore Contour Turning Applications

  • Internal profiling: Compound contours and angled transitions.
  • Precision boring: Internal diameter correction and finishing.
  • Hoàn thiện phần vai: Short steps and controlled corner transitions.
  • Chamfering: Internal chamfers within the tool’s clearance limits.

For sleeves, bushings, miniature hydraulic parts and precision components on CNC turning centers or Swiss-type lathes with compatible holders.

Phù hợp nhất cho: Components combining bore finishing, internal contours and shoulder transitions.

Không phù hợp với: Threads, deep grooves or full-radius form grooves requiring dedicated tooling.

Micro internal tooling reference for boring, profiling, grooving and threading

MQR Profiling Bar Details

MQR solid carbide micro profiling and boring barsMQR micro profiling bar cutting edge and product detailsMQR micro profiling and boring bar detail view 1MQR micro profiling and boring bar detail view 3MQR micro profiling and boring bar detail view 5MQR micro profiling and boring bar detail view 2MQR micro profiling and boring bar detail view 4

Aluminum-Application Configurations

Aluminum-application versions are shown below. Confirm the cutting edge, radius and surface treatment for your alloy and finish requirements.

MQR micro profiling bar aluminum-application versionMQR aluminum-application profiling bar product detailMQR aluminum-application micro boring tool view 1MQR aluminum-application micro boring tool view 2

Workpiece Materials & Coating Options

Match carbide grade, coating and edge preparation to steel, stainless steel, copper alloys and other workpiece materials. Titanium, cast iron and hardened materials require application-specific confirmation.

Tham chiếu vật liệu phôi cho gia công bằng dụng cụ nội bộ cỡ nhỏSolid carbide micro boring bar coating application guide

Series-level references. Confirm material suitability and coating specifications for the selected MQR model.

Select Your Small-Bore Profiling Tool

Match cutting diameter d1, radius R, cutting depth Q and clearance length L1 to the internal profile. Choose the shortest suitable reach and check the cutting head, neck and complete toolpath for interference.

MQR micro internal profiling bar tool structure referenceHY micro internal boring and profiling tool series

MQR Micro Profiling & Boring Bar Specifications

Select your solid carbide micro internal profiling bar by cutting diameter d1, tip radius R, cutting depth Q and clearance length L1.

MQR micro internal profiling and boring bar dimension drawing and size chart

All dimensions in mm. Cutting diameter d1 is not the minimum bore size; confirm clearance throughout the profile toolpath.

Standard Models & Dimensions

Nhóm Mô hình Đường kính cắt d1 Tip Radius R Độ sâu cắt Q Giảm giá L1 Shank D Tổng thể L
MQR3.0 Ø2.9 R0.05 / R0.10 / R0.15 0.7 9 Ø4 50
MQR4.0 Ø3.9 R0.05 / R0.10 / R0.20 1.0 10 / 15 Ø4 50
MQR5.0 Ø4.9 R0.05 / R0.10 / R0.20 1.2 15 / 20 Ø5 50
MQR6.0 Ø5.9 R0.05 / R0.10 / R0.20 / R0.40 1.6 15 / 22 Ø6 50
MQR8.0 Ø7.9 R0.10 / R0.20 2.1 25 Ø8 60

Confirm the exact radius and length combination against the detailed chart before ordering.

Bạn cần biết thông tin về kích cỡ, giá cả hoặc các tùy chọn đặt hàng theo yêu cầu?

Send your model code or drawing, bore size, internal profile, workpiece material and quantity for selection and pricing.

Internal Profiling Tool Selection

  • Profile & clearance: Check the 47° head, neck and complete cutting and retraction path.
  • Bán kính và độ sâu: Match R and Q to the required internal feature.
  • Phạm vi tiếp cận và thời gian giữ: Select the shortest suitable L1 and a compatible shank and holder.

Custom diameters, radii, reach lengths, shanks and cutting profiles can be reviewed from component drawings.

Các công cụ nội bộ Micro liên quan

MQR Micro Profiling Bar Customization

Custom profiles, cutting diameters, tip radii, clearance lengths and shanks can be reviewed for MQR solid carbide micro profiling and boring bars.

Dòng dụng cụ gia công vi mô dành cho sản xuất theo yêu cầu và cung ứng OEM

Các tùy chọn OEM và nhãn hiệu riêng

Laser marking on micro internal tool shanks

Khắc laser

Logo và mã mẫu, tùy thuộc vào không gian trên thân sản phẩm.

Bao bì mang nhãn hiệu riêng dành cho các dụng cụ nội soi siêu nhỏ

Bao bì mang nhãn hiệu riêng

Nhãn hiệu và bao bì bảo vệ.

Tài liệu tham khảo bản vẽ dụng cụ gia công vi mô tùy chỉnh

Bản vẽ và Thông số kỹ thuật

Approved geometry and dimensions for repeat orders.

Quy trình đặt hàng theo yêu cầu

Xem xét hồ sơ → Phê duyệt bản vẽ → Lấy mẫu (nếu cần) → Sản xuất và kiểm tra.

Quy trình thiết kế và sản xuất dụng cụ cắt theo yêu cầu

MQR Micro Profiling Bar Quality Control

Việc kiểm tra vật liệu, kiểm soát quá trình mài và kiểm tra cuối cùng nhằm xác minh MQR micro internal profiling bars so với các thông số kỹ thuật đã được xác nhận hoặc bản vẽ đã được phê duyệt.

Kiểm tra kích thước và kiểm tra tiên tiến đối với dụng cụ cacbua

Các điểm kiểm tra chính

  • Chất liệu: Loại cacbua và thông số kỹ thuật của phôi.
  • Hình dạng cắt: Head geometry, diameter d1, radius R and edge condition.
  • Kích thước: Độ sâu cắt Q, chiều dài khe hở L1, đường kính thân dao D và chiều dài tổng thể L.
  • Xác định: Mã mẫu, ký hiệu và nhãn mác.

Các yêu cầu về hồ sơ kiểm tra và nhận dạng lô hàng được xác nhận cùng với đơn đặt hàng.

Bao bì bảo vệ

Các biện pháp bảo vệ riêng lẻ, nhãn mẫu và bao bì xuất khẩu giúp bảo vệ các cạnh cắt và đơn giản hóa việc nhận diện hàng tồn kho.

Individual cutting tool protection and packaging process
Các tùy chọn đóng gói xuất khẩu cho đơn hàng dụng cụ cắt

Thời gian giao hàng & Vận chuyển

Các công cụ tiêu chuẩn: Thông thường từ 1–3 ngày làm việc, tùy thuộc vào tình trạng hàng tồn kho.

Các công cụ tùy chỉnh: Thời gian giao hàng được xác nhận dựa trên việc phê duyệt bản vẽ, hình dạng, lớp phủ và số lượng.

Thông tin tham khảo về vận chuyển và thanh toán của HY Cutting Tools

MQR Micro Profiling & Boring Bar FAQs

Can one MQR tool perform both internal profiling and boring?
Yes. MQR solid carbide micro bars support bore finishing, compound internal contours, chamfers and shoulder transitions where the cutting profile and toolpath provide sufficient clearance.
What does the 47° designation mean?
It identifies the cutting-head geometry shown in the tool drawing. It does not specify the finished chamfer angle or the full range of machinable profiles. Confirm the component contour, cutting direction and clearance together.
What bore sizes can MQR profiling bars machine?
Standard cutting diameters d1 are Ø2.9, Ø3.9, Ø4.9, Ø5.9 and Ø7.9 mm. These are tool dimensions, not minimum bore specifications. Check the cutting head, neck and complete entry, profiling and retraction path for interference.
How do I select the radius, cutting depth and clearance length?
Match radius R and cutting depth Q to the internal feature, then choose the shortest suitable clearance length L1. Standard ranges are R0.05–R0.40 mm, Q 0.7–2.1 mm and L1 9–25 mm. Available combinations depend on the model.
What is the difference between MQR and MPR profiling bars?
MQR uses a 47° cutting-head geometry, while MPR uses a 22° geometry. Both support internal profiling and boring. Compare the tool drawings against your component profile, required reach and available clearance to select the suitable series.

Công cụ tùy chỉnh & Đặt hàng

Can MQR tools be customized or supplied under my brand?
Yes. Custom profiles, diameters, radii, clearance lengths and shanks can be reviewed from drawings or samples. Application-matched coatings, laser marking and private-label packaging are also available.
Số lượng đặt hàng tối thiểu (MOQ) và thời gian giao hàng là bao nhiêu?
The standard MOQ is 10 pieces. Mixed-model trial orders are reviewed by specification and availability. Standard tools typically dispatch within 1–3 working days, subject to stock. Custom lead times are confirmed with the quotation.
What information is needed for tool selection and pricing?
Send your model code or component drawing, bore size, internal contour, corner radii, required reach, tolerance, workpiece material and hardness, and quantity. Include any coating, marking or packaging requirements.

Tài liệu kỹ thuật

Bạn cần biết thông tin về kích cỡ, giá cả hoặc các tùy chọn đặt hàng theo yêu cầu?

Vui lòng gửi thông số kỹ thuật và số lượng để nhận báo giá.

  • Kích thước tiêu chuẩn
  • Các lệnh xét xử sơ thẩm nhỏ
  • Các kích cỡ khác nhau
  • OEM & Dụng cụ theo yêu cầu
Xem mã QR – Liên hệ bộ phận bán hàng qua WeChat
Mã QR WeChat của HY Cutting Tools

Quét mã để liên hệ với chúng tôi trên WeChat.

Yêu cầu thông tin về sản phẩm HY

WeChat

Mã QR WeChat của HY Cutting Tools

Quét mã để liên hệ với chúng tôi trên WeChat.