Dao phay cầu hợp kim nguyên khối 2 me HRC55 đường kính nhỏ, chuôi 4 mm

HRC55 Micro Ball Nose End Mills – Ø0.3–Ø0.9 mm
HRC55 2-flute solid carbide micro ball end mill for fine 3D contouring and miniature mold finishing in steel. Reference diameters: Ø0.3–0.9 mm, with a 4 mm shank.
Hồ sơ cuối:Mũi khoan hình cầu bán kính đầy đủ
Số lượng sáo:2 sáo
Độ cứng thép:HRC55 Series
Đường kính thân:4 mm
Phạm vi đường kính:Ø0.3–Ø0.9 mm
Lớp phủ:TiSiN
Ứng dụng / Vật liệu
Thép cacbon PThép hợp kim PThép công cụ PThép H đã qua xử lý nhiệt sơ bộ
TỐT NHẤT DÀNH CHO

Precision Micro Milling

Fine 3D contours and miniature mold

Micro Cutting Range

Micro diameters for intricate features

Hình học được tối ưu hóa

Chip clearance for delicate micro cutting

Standard 4 mm Shank

Consistent clamping across micro sizes

HRC55 Micro Ball Nose End Mill for Steel

Điều này solid carbide micro ball nose end mill features a full-radius tip for small curved surfaces, fine contours and recessed mold details. The two-flute miniature ball end mill provides chip clearance for micro machining. Select the ball radius, cutting length and coating to suit the feature and steel hardness, with low runout and minimal tool overhang.

Micro Ball Nose End Mill Video

 

 

HRC55 Micro Ball Nose End Mill for Steel– Product & Steel-Milling Demonstration

Micro Geometry & Cutting Details

Precision-ground 2-flute ball nose geometry provides chip clearance for miniature 3D features, while the 4 mm shank supports consistent toolholding across micro cutting sizes.

HRC55 micro ball nose end mill for steel with 4 mm shank and miniature cutting diameter
Two-flute solid carbide micro ball nose end mill precision geometry

Micro Ball Nose Profile

Full-radius geometry for fine 3D contours and small mold details.

2-Flute Chip Clearance

Chip space for controlled cutting in miniature features.

4 mm Shank Design

Common shank size for consistent micro-tool clamping.

Các loại vật liệu phôi được khuyến nghị

Cái HRC55 micro ball nose end mill for steel supports precision micro milling and fine mold finishing in selected steel grades. Material hardness and cutting conditions should be confirmed before machining.

HRC55 micro ball nose end mill application materials including tool steel, quenched and tempered steel, pre-hardened steel, carbon steel, alloy steel and cast iron

Chất liệu Common Grades
Thép công cụ AISI O1, A2, D2, SKD11
Quenched & Tempered Steel 4140 QT, 4340 QT, 42CrMo4 QT, SCM440 QT
Thép đã qua xử lý làm cứng sẵn P20, 1,2311, 1,2738, 718H
Thép cacbon AISI 1045, 1050, C45, S45C
Thép hợp kim AISI 4140, 4340, 40Cr, 42CrMo4
Gang HT250, EN-GJL-250, EN-GJS-400-15

Ghi chú về vật liệu: Grades are reference examples. Confirm actual hardness, material condition and tool suitability, particularly for hardened tool steels and cast iron.

HRC55 Micro Ball Nose End Mill Specifications

Reference specifications for the HRC55 2-flute micro ball nose end mill for steel with a 4 mm shank.

Tham số Thông số kỹ thuật
Loại dụng cụ Micro Ball Nose End Mill
Chất nền Cacbua rắn hạt mịn
Đường kính cắt Ø0.3–Ø0.9 mm
Bán kính quả bóng R0.15–R0.45 mm
Đường kính thân 4 mm
Sáo 2
Dòng sản phẩm về độ cứng HRC55
Các tùy chọn lớp phủ TiN / AlTiN — Confirm by Model

Micro Ball Nose End Mill for Steel Size Reference

Reference diameter and radius combinations. Confirm cutting length và overall length trước khi đặt hàng.

Micro ball nose end mill technical dimensions and 4 mm shank
CUTTING D RADIUS R SHANK d SÁO
Ø0.3 mm R0.15 4 mm 2
Ø0.4 mm R0.20 4 mm 2
Ø0.5 mm R0.25 4 mm 2
Ø0.6 mm R0.30 4 mm 2
Ø0.7 mm R0.35 4 mm 2
Ø0.8 mm R0.40 4 mm 2
Ø0.9 mm R0.45 4 mm 2

Tùy chỉnh & OEM

Các tùy chọn về kích thước tùy chỉnh, hình dạng và nhãn hiệu riêng đều có sẵn cho các chương trình dành cho nhà phân phối và nhà sản xuất thiết bị gốc (OEM).

Các giải pháp dụng cụ cắt cho nhà sản xuất thiết bị gốc (OEM) và nhãn hiệu riêng
solid carbide micro end mill product collection photo

Drawing- and sample-based customization is available for precision micro milling and miniature mold finishing in steel.

Chất lượng, Kiểm tra và Giao hàng

Của chúng tôi HRC55 solid carbide micro ball nose end mills undergo material verification, precision grinding and final inspection. Micro cutting diameters (Ø0.3–Ø0.9 mm), ball-radius accuracy, cutting-edge condition, shank dimensions and coating quality are checked to support consistent precision micro milling and repeat orders.
Kiểm soát chất lượng sản xuất đến khâu xuất xưởng các dụng cụ cắt

HRC55 Micro Ball Nose End Mill FAQs

Common questions about micro ball nose end mill sizes, 4 mm shanks, precision mold finishing and steel applications.

What is a micro ball nose end mill used for?
Micro ball nose end mills are used for miniature mold details, fine 3D contouring, small curved surfaces and precision profiling of steel components.
What is the difference between micro and standard ball nose end mills?
Micro ball nose end mills have smaller cutting diameters for fine details and restricted features. Standard ball nose end mills suit larger 3D surfaces and general mold finishing.
What cutting diameters are available for this HRC55 micro ball nose end mill?
The reference cutting diameter range is Ø0.3–Ø0.9 mm with a 4 mm shank. Confirm individual sizes, flute lengths and overall lengths before ordering.
How do I choose the correct micro ball nose radius?
For a full-radius ball nose, R = D/2. For example, Ø0.6 mm corresponds to R0.3 mm. Select the radius according to the smallest feature and required surface detail.
Why use a 4 mm shank on a micro ball nose end mill?
The standard 4 mm shank allows different micro cutting diameters to use compatible precision holders. Low runout and secure clamping remain essential.
Can an HRC55 micro ball nose end mill machine hardened steel?
The HRC55 series targets selected steel and mold-steel applications. Confirm actual hardness, coating and cutting conditions before machining hardened materials.
Why choose a 2-flute micro ball nose end mill?
Two flutes provide chip clearance for small-diameter milling and help manage cutting loads when machining miniature features.

Câu hỏi thường gặp về kích cỡ và đặt hàng

Information for precision tooling buyers, distributors and OEM customers.

Can I order mixed micro ball nose end mill sizes?
Mixed-size orders can be reviewed according to the required diameters, lengths, coating and quantities.
Are custom micro ball nose end mills and OEM packaging available?
Selected custom diameters, cutting lengths, coatings, laser marking and private-label packaging can be reviewed for OEM orders.
What information is needed to quote a micro ball nose end mill?
Send the cutting diameter or radius, flute length, overall length, workpiece material, hardness and quantity. Include drawings for custom sizes.

Tài liệu kỹ thuật để tải xuống

Product catalogs and reference milling parameters.

Danh mục dao phay đầu bằng cacbua nguyên khối

Review carbide end mill series and sizes.

Xem danh mục

Hướng dẫn về tốc độ và bước tiến của dao phay đầu tròn

Tham khảo các thông số cắt ban đầu.

Xem Hướng dẫn

Bạn cần biết thông tin về kích cỡ, giá cả hoặc các tùy chọn đặt hàng theo yêu cầu?

Vui lòng gửi thông số kỹ thuật và số lượng để nhận báo giá.

  • Kích thước tiêu chuẩn
  • Các lệnh xét xử sơ thẩm nhỏ
  • Các kích cỡ khác nhau
  • OEM & Dụng cụ theo yêu cầu
Xem mã QR – Liên hệ bộ phận bán hàng qua WeChat
Mã QR WeChat của HY Cutting Tools

Quét mã để liên hệ với chúng tôi trên WeChat.

Yêu cầu thông tin về sản phẩm HY

WeChat

Mã QR WeChat của HY Cutting Tools

Quét mã để liên hệ với chúng tôi trên WeChat.