DLC-Coated Carbide Ball Nose End Mill for Aluminum – 2-Flute

ALUMINUM 3D CONTOURING & FINISHING SERIES
Designed for 3D contouring, curved-surface machining and finishing of aluminum alloys.
Profil Sonu:Yuvarlak Burun
Flüt sayısı:2 Flüt
Uygulama:3D Contouring & Curved-Surface Finishing
Çap aralığı:R0.5-R10
Total Length:50-150mm
Kaplama:DLC
Uygulama / Malzeme
N Aluminum AlloysN Copper & BrassN Other Non-Ferrous Materials
Fiyat Teklifi Alın WhatsApp'ta Sohbet Et
BEST FOR

3D Contouring

Curved and free-form aluminum surfaces.

Cavity Finishing

Mold cavities, fillets and recessed profiles.

2-Kanallı Talaş Boşluğu

Efficient chip evacuation in aluminum.

DLC Low Friction

Reduced adhesion and built-up edge.

DLC-Coated Carbide Ball Nose End Mill Overview

This DLC-coated carbide ball nose end mill 2 flutes is designed for 3D contouring, profiling and finishing in aluminum and selected non-ferrous materials. Full-radius geometry, wide chip space and a low-friction DLC surface support stable machining, while standard and custom sizes are available for repeat supply and OEM programs.

Technical Design Features

Sharp Cutting Edge & Reinforced Core

Negative-rake cutting-edge geometry combines cutting sharpness with improved edge strength for stable aluminum machining.

A large-core design increases tool rigidity, supports stable cutting and chip evacuation, and helps reduce the risk of edge chipping.

Sharp cutting edge and reinforced core of DLC-coated carbide ball nose end mill

35 degree helix geometry and wide flute space for DLC-coated carbide ball nose end mill

35° Helix & Precision-Ground Flutes

Bu 35° helix angle and precision-ground spiral flute geometry provide enlarged chip space for aluminum machining.

Smooth chip evacuation helps reduce chip adhesion and recutting while supporting higher-efficiency 3D contouring, profiling and finishing.

Multi-Layer DLC Coating Structure

A 3-layer coating structure improves surface hardness, wear resistance and thermal performance during continuous machining.

The low-friction DLC surface helps reduce aluminum adhesion, built-up edge and tool wear, supporting stable high-efficiency non-ferrous machining.

Multi-layer DLC coating structure for aluminum ball nose end mill

Precision-ground solid carbide shank for aluminum end mill

Precision-Ground Shank

The precision-ground straight shank is controlled to a 0 / -0.005 mm diameter tolerance for stable clamping and repeatable tool positioning.

Tight shank control helps reduce vibration and chatter, supporting stable cutting and consistent machining performance.

Materials & Applications

DLC-coated aluminum end mill application materials

Malzeme Grubu Typical Grades / Materials Tipik Uygulamalar
Aluminum Alloys 5052 · 6061 · 7075 3D Contouring · Cavity Finishing · Profile Milling · Surface Finishing
Cast Aluminum Aluminum Castings Pocket Machining · Semi-Finishing · Finishing
Other Non-Ferrous Brass · Zinc · Acrylic · Other Materials Application Review Required

Uygulama Notu:
Designed primarily for aluminum. For brass, zinc, acrylic and other materials, please confirm compatibility with our sales team before ordering.

Explore our alüminyum parmak frezeler for other geometries, or read our DLC end mill supplier selection guide for more information.

Product Details & Machining

Ball nose geometry, DLC-coated cutting edge and aluminum machining reference.

DLC kaplamalı karbür bilyeli burunlu parmak freze

DLC-coated Carbide Ball Nose End Mill 2 Flutes

 DLC coated carbide ball nose end mill 2 pcs

2-Flute Geometry & DLC Cutting Edge
DLC coated carbide ball nose end mill for aluminum

Aluminum 3D Contouring & Finishing

 DLC coated carbide ball nose end mill with plastic box

Product & Packaging View

DLC-coated carbide end mill batch display

DLC-Coated End Mill Batch Display

DLC-Coated Carbide Ball Nose End Mill 2 Flutes for Aluminum Machining

Ball Nose End Mill Dimensions

Standard dimensions for 2-flute DLC-coated solid carbide ball nose end mills, including radius, cutting diameter, flute length, shank diameter and overall length. All sizes are in millimeters.

DLC-coated 2-flute solid carbide ball nose end mill dimension reference
R: Topun Yarıçapı DC / D: Kesim Çapı APMX / L1: Flüt Uzunluğu DCON / d: Şaft Çapı OAL / L: Toplam Uzunluk

Technical Configuration

TECHNICAL ITEM SPECIFICATION
Alet Tipi Solid Carbide Ball Nose End Mill
Profil Sonu Ball Nose / Full Radius
Flütler 2 Flüt
Alt tabaka Sub-Micron Solid Carbide
Kaplama DLC
Helezon Açısı 35°–40°
Şaft Toleransı 0 / -0.005 mm
Materials Aluminum Alloys / Selected Non-Ferrous
Uygulamalar 3D Contouring / Curved Surfaces / Cavity Finishing / Profiling
Cutting Direction Right-Hand
Chip Control Air Blast / Oil Mist / External Coolant

Standart Boyutlar

Scroll to review the full size range.

SPECIFICATION R DC / D APMX / L1 DCON / d OAL / L FLÜT
R0.5×2×D4×50L 0.5 1 2 4 50 2
R0.75×3×D4×50L 0.75 1.5 3 4 50 2
R1×4×D4×50L 1 2 4 4 50 2
R1.25×5×D4×50L 1.25 2.5 5 4 50 2
R1.5×6×D3×50L 1.5 3 6 3 50 2
R1.5×6×D3×75L 1.5 3 6 3 75 2
R1.5×6×D3×100L 1.5 3 6 3 100 2
R1.5×6×D4×50L 1.5 3 6 4 50 2
R1.5×6×D6×50L 1.5 3 6 6 50 2
R1.75×7×D4×50L 1.75 3.5 7 4 50 2
R2×8×D4×50L 2 4 8 4 50 2
R2×8×D4×75L 2 4 8 4 75 2
R2×8×D4×100L 2 4 8 4 100 2
R2.5×10×D5×50L 2.5 5 10 5 50 2
R2.5×10×D5×75L 2.5 5 10 5 75 2
R2.5×10×D5×100L 2.5 5 10 5 100 2
R2.5×10×D6×50L 2.5 5 10 6 50 2
R3×12×D6×50L 3 6 12 6 50 2
R3×12×D6×75L 3 6 12 6 75 2
R3×12×D6×100L 3 6 12 6 100 2
R3×12×D6×150L 3 6 12 6 150 2
R3.5×14×D8×60L 3.5 7 14 8 60 2
R4×16×D8×60L 4 8 16 8 60 2
R4×16×D8×75L 4 8 16 8 75 2
R4×16×D8×100L 4 8 16 8 100 2
R4×16×D8×150L 4 8 16 8 150 2
R4.5×18×D10×75L 4.5 9 18 10 75 2
R5×20×D10×75L 5 10 20 10 75 2
R5×20×D10×100L 5 10 20 10 100 2
R5×20×D10×150L 5 10 20 10 150 2
R5.5×22×D12×75L 5.5 11 22 12 75 2
R6×24×D12×75L 6 12 24 12 75 2
R6×24×D12×100L 6 12 24 12 100 2
R6×24×D12×150L 6 12 24 12 150 2
R6.5×26×D14×100L 6.5 13 26 14 100 2
R7×28×D14×80L 7 14 28 14 80 2
R7×28×D14×100L 7 14 28 14 100 2
R7×28×D14×150L 7 14 28 14 150 2
R8×32×D16×100L 8 16 32 16 100 2
R8×32×D16×150L 8 16 32 16 150 2
R9×36×D18×100L 9 18 36 18 100 2
R9×36×D18×150L 9 18 36 18 150 2
R10×40×D20×100L 10 20 40 20 100 2
R10×40×D20×150L 10 20 40 20 150 2

How to Select & Apply

  • Ball Radius: Match surface curvature and finish.
  • Step-Over: Reduce for finer 3D finishing.
  • Tool Reach: Minimize overhang.
  • Çip Tahliyesi: Air blast, oil mist or suitable coolant.

Ready to Order? Key Purchasing Details

🛒
One-Stop Service
🚚
In Stock: 1–3 Days
Standard sizes can ship quickly from available stock.
📦
MOQ: 3–10 pcs / Size
Trial and mixed-size orders supported.
⏱
Custom: 7–10 Days
Extra time is required for DLC coating.
🔄
Mixed Orders & Export Support
Mixed products with shipping and export support.
One-Stop Sourcing
Nearby warehouse dispatch Mixed-product orders Freight-forwarder support Selected local-currency payments New-customer & referral offers

Simplify sourcing, shipping and export coordination in one order. Contact our sales team to confirm stock, delivery and the best order plan.

Need a different aluminum milling geometry? View our aluminum end mill series.

Ball Nose End Mill Customization

Custom dimensions, geometry and DLC options for DLC-coated carbide ball nose end mill.

CUSTOM ITEM OPTIONS
Ball Radius / Diameter R0.5–R10 / Drawing-Based
Flüt Uzunluğu Standard / Custom
Neck / Reach Straight / Relieved / Long Reach
Toplam Uzunluk Standard / Extended
Şaft Çapı Standard / Custom
Edge Geometry Aluminum Geometry
Kaplama DLC / Application Review
Hoşgörü Drawing-Defined

OEM & Private Label

Laser Marking Product Code Custom Label Private-Label Packaging Repeat Supply
OEM laser marking labels and private-label packaging for ball nose end mills

For laser marking, labels and branded packaging, review our OEM & private-label cutting tools .

HY Cutting Tools custom tooling process

For drawing-based dimensions and application-specific geometry, see our custom cutting tools .

Kalite Kontrolü

HY Cutting Tools manufacturing and quality assurance

Material verification · Precision grinding · Final inspection

AŞAMA 01

Material Verification

Carbide Grade · Blank Size

AŞAMA 02

Precision Grinding

Ball Profile · Flute Geometry · Shank

AŞAMA 03

Final Inspection

Dimensions · Runout · Cutting Edge · DLC

Key Inspection Items

✓ Topun Yarıçapı
✓ Kesim Çapı
✓ Flüt Uzunluğu
✓ Şaft Çapı
✓ Kaçış
✓ Ball Profile
✓ Keskin Kenar
✓ DLC Coating

Repeat-Order Control

✓ Dimensions
✓ Ball Profile
✓ Geometri
✓ DLC Coating
✓ Laser Marking
✓ Paketleme

Packaging & Delivery

✓ Protective Tubes
✓ Bulk Cartons
✓ Export Packing
✓ Courier
✓ Air Freight
✓ Sea Freight
 

See our full manufacturing and quality control process for grinding, inspection and repeat-order control.

SSS

Information on selecting DLC-coated carbide ball nose end mills, available sizes, custom dimensions, OEM options and ordering requirements for standard and repeat supply.

What materials is this end mill designed for?
Primarily aluminum alloys and selected non-ferrous materials.
What applications is the ball nose profile best for?
3D contouring, curved surfaces, cavity finishing and profiling.
Why use 2 flutes for aluminum?
Wide chip space supports chip evacuation and reduces recutting.
What is the benefit of DLC coating?
Low friction, reduced aluminum adhesion and improved wear resistance.
Hangi standart boyutlar mevcuttur?
R0.5–R10, Ø1–Ø20 mm, with multiple listed flute and overall lengths.
Can custom dimensions be manufactured?
Yes. Radius, diameter, flute length, reach, shank and overall length can be reviewed by drawing.
OEM etiketleme ve özel markalı ambalajlama seçenekleri mevcut mu?
Laser marking, product codes, custom labels and private-label packaging are available by order requirement.
Can sample or mixed-size orders be arranged?
Sample, mixed-size and repeat orders can be reviewed according to size, quantity and production requirements.

Teknik Dosyalar

Katı Karbür Uçlu Freze Kataloğu

Ball Nose · Square · Corner Radius · Specialty

Kataloğu Görüntüle

Uçlu Freze Hızları ve İlerleme Hızları Kılavuzu

Reference cutting data for machining trials.

Kılavuza Göz At

Learn why clients choose HY for repeat supply, custom tooling and private-label programs.

Need more information about ordering, customization, shipping or tooling? Visit our FAQs page.

Ölçüler, fiyatlar veya özel seçenekler mi arıyorsunuz?

Gerekli takım türünü, boyutlarını, miktarlarını, iş parçası malzemesini ve varsa OEM veya özel gereksinimleri bize iletin. Uygun teknik özellikleri, stok durumunu, teslim süresini ve fiyat teklifi ayrıntılarını size teyit edeceğiz.

Standart Boyutlar Küçük Ölçekli Dava Kararları Çeşitli Bedenler OEM ve Özel Seçenekler
Fiyat ve Teknik Özellikler Talebi WhatsApp'ta sohbet et

Çizimler, boyut listeleri ve referans fotoğraflar memnuniyetle kabul edilir.

İlgili Ürünler