DLC-Coated Carbide Ball Nose End Mill for Aluminum – 2-Flute
3D Contouring
Curved and free-form aluminum surfaces.
Cavity Finishing
Mold cavities, fillets and recessed profiles.
2-Flute Chip Space
Efficient chip evacuation in aluminum.
DLC Low Friction
Reduced adhesion and built-up edge.
DLC-Coated Carbide Ball Nose End Mill Overview
This DLC-coated carbide ball nose end mill 2 flutes is designed for 3D contouring, profiling and finishing in aluminum and selected non-ferrous materials. Full-radius geometry, wide chip space and a low-friction DLC surface support stable machining, while standard and custom sizes are available for repeat supply and OEM programs.
Technical Design Features
Sharp Cutting Edge & Reinforced Core
Negative-rake cutting-edge geometry combines cutting sharpness with improved edge strength for stable aluminum machining.
A large-core design increases tool rigidity, supports stable cutting and chip evacuation, and helps reduce the risk of edge chipping.
35° Helix & Precision-Ground Flutes
En 35° helix angle and precision-ground spiral flute geometry provide enlarged chip space for aluminum machining.
Smooth chip evacuation helps reduce chip adhesion and recutting while supporting higher-efficiency 3D contouring, profiling and finishing.
Multi-Layer DLC Coating Structure
A 3-layer coating structure improves surface hardness, wear resistance and thermal performance during continuous machining.
The low-friction DLC surface helps reduce aluminum adhesion, built-up edge and tool wear, supporting stable high-efficiency non-ferrous machining.
Precision-Ground Shank
The precision-ground straight shank is controlled to a 0 / -0.005 mm diameter tolerance for stable clamping and repeatable tool positioning.
Tight shank control helps reduce vibration and chatter, supporting stable cutting and consistent machining performance.
Materials & Applications
| Grupo de materiales | Typical Grades / Materials | Typical Applications |
|---|---|---|
| Aluminum Alloys | 5052 · 6061 · 7075 | 3D Contouring · Cavity Finishing · Profile Milling · Surface Finishing |
| Cast Aluminum | Aluminum Castings | Pocket Machining · Semi-Finishing · Finishing |
| Other Non-Ferrous | Brass · Zinc · Acrylic · Other Materials | Application Review Required |
Application Note:
Designed primarily for aluminum. For brass, zinc, acrylic and other materials, please confirm compatibility with our sales team before ordering.
Explore our fresas de aluminio for other geometries, or read our DLC end mill supplier selection guide for more information.
Product Details & Machining
Ball nose geometry, DLC-coated cutting edge and aluminum machining reference.
DLC-coated Carbide Ball Nose End Mill 2 Flutes |
2-Flute Geometry & DLC Cutting Edge |
Aluminum 3D Contouring & Finishing |
Product & Packaging View |
DLC-Coated End Mill Batch Display
DLC-Coated Carbide Ball Nose End Mill 2 Flutes for Aluminum Machining
Ball Nose End Mill Dimensions
Standard dimensions for 2-flute DLC-coated solid carbide ball nose end mills, including radius, cutting diameter, flute length, shank diameter and overall length. All sizes are in millimeters.
Technical Configuration
| TECHNICAL ITEM | SPECIFICATION |
|---|---|
| Tipo de herramienta | Solid Carbide Ball Nose End Mill |
| End Profile | Ball Nose / Full Radius |
| Flautas | 2 Flutes |
| Substrate | Sub-Micron Solid Carbide |
| Revestimiento | DLC |
| Ángulo de la hélice | 35°–40° |
| Shank Tolerance | 0 / -0.005 mm |
| Materials | Aluminum Alloys / Selected Non-Ferrous |
| Aplicaciones | 3D Contouring / Curved Surfaces / Cavity Finishing / Profiling |
| Dirección de corte | Right-Hand |
| Chip Control | Air Blast / Oil Mist / External Coolant |
Standard Sizes
Scroll to review the full size range.
| SPECIFICATION | R | DC / D | APMX / L1 | DCON / d | OAL / L | FLUTES |
|---|---|---|---|---|---|---|
| R0.5×2×D4×50L | 0.5 | 1 | 2 | 4 | 50 | 2 |
| R0.75×3×D4×50L | 0.75 | 1.5 | 3 | 4 | 50 | 2 |
| R1×4×D4×50L | 1 | 2 | 4 | 4 | 50 | 2 |
| R1.25×5×D4×50L | 1.25 | 2.5 | 5 | 4 | 50 | 2 |
| R1.5×6×D3×50L | 1.5 | 3 | 6 | 3 | 50 | 2 |
| R1.5×6×D3×75L | 1.5 | 3 | 6 | 3 | 75 | 2 |
| R1.5×6×D3×100L | 1.5 | 3 | 6 | 3 | 100 | 2 |
| R1.5×6×D4×50L | 1.5 | 3 | 6 | 4 | 50 | 2 |
| R1.5×6×D6×50L | 1.5 | 3 | 6 | 6 | 50 | 2 |
| R1.75×7×D4×50L | 1.75 | 3.5 | 7 | 4 | 50 | 2 |
| R2×8×D4×50L | 2 | 4 | 8 | 4 | 50 | 2 |
| R2×8×D4×75L | 2 | 4 | 8 | 4 | 75 | 2 |
| R2×8×D4×100L | 2 | 4 | 8 | 4 | 100 | 2 |
| R2.5×10×D5×50L | 2.5 | 5 | 10 | 5 | 50 | 2 |
| R2.5×10×D5×75L | 2.5 | 5 | 10 | 5 | 75 | 2 |
| R2.5×10×D5×100L | 2.5 | 5 | 10 | 5 | 100 | 2 |
| R2.5×10×D6×50L | 2.5 | 5 | 10 | 6 | 50 | 2 |
| R3×12×D6×50L | 3 | 6 | 12 | 6 | 50 | 2 |
| R3×12×D6×75L | 3 | 6 | 12 | 6 | 75 | 2 |
| R3×12×D6×100L | 3 | 6 | 12 | 6 | 100 | 2 |
| R3×12×D6×150L | 3 | 6 | 12 | 6 | 150 | 2 |
| R3.5×14×D8×60L | 3.5 | 7 | 14 | 8 | 60 | 2 |
| R4×16×D8×60L | 4 | 8 | 16 | 8 | 60 | 2 |
| R4×16×D8×75L | 4 | 8 | 16 | 8 | 75 | 2 |
| R4×16×D8×100L | 4 | 8 | 16 | 8 | 100 | 2 |
| R4×16×D8×150L | 4 | 8 | 16 | 8 | 150 | 2 |
| R4.5×18×D10×75L | 4.5 | 9 | 18 | 10 | 75 | 2 |
| R5×20×D10×75L | 5 | 10 | 20 | 10 | 75 | 2 |
| R5×20×D10×100L | 5 | 10 | 20 | 10 | 100 | 2 |
| R5×20×D10×150L | 5 | 10 | 20 | 10 | 150 | 2 |
| R5.5×22×D12×75L | 5.5 | 11 | 22 | 12 | 75 | 2 |
| R6×24×D12×75L | 6 | 12 | 24 | 12 | 75 | 2 |
| R6×24×D12×100L | 6 | 12 | 24 | 12 | 100 | 2 |
| R6×24×D12×150L | 6 | 12 | 24 | 12 | 150 | 2 |
| R6.5×26×D14×100L | 6.5 | 13 | 26 | 14 | 100 | 2 |
| R7×28×D14×80L | 7 | 14 | 28 | 14 | 80 | 2 |
| R7×28×D14×100L | 7 | 14 | 28 | 14 | 100 | 2 |
| R7×28×D14×150L | 7 | 14 | 28 | 14 | 150 | 2 |
| R8×32×D16×100L | 8 | 16 | 32 | 16 | 100 | 2 |
| R8×32×D16×150L | 8 | 16 | 32 | 16 | 150 | 2 |
| R9×36×D18×100L | 9 | 18 | 36 | 18 | 100 | 2 |
| R9×36×D18×150L | 9 | 18 | 36 | 18 | 150 | 2 |
| R10×40×D20×100L | 10 | 20 | 40 | 20 | 100 | 2 |
| R10×40×D20×150L | 10 | 20 | 40 | 20 | 150 | 2 |
How to Select & Apply
- Ball Radius: Match surface curvature and finish.
- Step-Over: Reduce for finer 3D finishing.
- Tool Reach: Minimize overhang.
- Evacuación de Chip: Air blast, oil mist or suitable coolant.
Ready to Order? Key Purchasing Details
Need a different aluminum milling geometry? View our aluminum end mill series.
Ball Nose End Mill Customization
Custom dimensions, geometry and DLC options for DLC-coated carbide ball nose end mill.
| CUSTOM ITEM | OPTIONS |
|---|---|
| Ball Radius / Diameter | R0.5–R10 / Drawing-Based |
| Longitud de flauta | Standard / Custom |
| Neck / Reach | Straight / Relieved / Long Reach |
| Longitud total | Standard / Extended |
| Diámetro del vástago | Standard / Custom |
| Edge Geometry | Aluminum Geometry |
| Revestimiento | DLC / Application Review |
| Tolerancia | Drawing-Defined |
OEM y marca propia
Quality Control
Material verification · Precision grinding · Final inspection
Material Verification
Carbide Grade · Blank Size
Precision Grinding
Ball Profile · Flute Geometry · Shank
Final Inspection
Dimensions · Runout · Cutting Edge · DLC
Key Inspection Items
Repeat-Order Control
Embalaje y entrega
See our full manufacturing and quality control process for grinding, inspection and repeat-order control.
PREGUNTAS FRECUENTES
Information on selecting DLC-coated carbide ball nose end mills, available sizes, custom dimensions, OEM options and ordering requirements for standard and repeat supply.
What materials is this end mill designed for?
What applications is the ball nose profile best for?
Why use 2 flutes for aluminum?
What is the benefit of DLC coating?
What standard sizes are available?
Can custom dimensions be manufactured?
Are OEM marking and private-label packaging available?
Can sample or mixed-size orders be arranged?
Technical Downloads
Solid Carbide End Mill Catalog
Ball Nose · Square · Corner Radius · Specialty
End Mill Speeds & Feeds Guide
Reference cutting data for machining trials.
Learn why clients choose HY for repeat supply, custom tooling and private-label programs.
Need more information about ordering, customization, shipping or tooling? Visit our FAQs page.Need Sizes, Pricing or Custom Options?
Send us the required tool type, sizes, quantities, workpiece material and any OEM or custom requirements. We will confirm suitable specifications, availability, lead time and quotation details.
Drawings, size lists and reference photos are welcome.
