Цельнометаллическая твердосплавная фреза с прямой канавкой под угол 90° для снятия фасок и заусенцев

This 90° straight-flute carbide chamfer mill provides CNC chamfering and deburring for steel, stainless steel, alloy steel and cast iron.

Product Configurations

Угол фаски:
90°
Диаметр реза:
Ø1–Ø20 мм
Флейта Граф:
2F / 3F by Size
Материал инструмента:
Твердый карбид
Workpiece Materials:
Steel / Stainless Steel / Alloy Steel / Cast Iron
Приложения:
Edge Chamfering / Hole Chamfering / Deburring
Получить расценки Общайтесь в WhatsApp
ЛУЧШИЙ ДЛЯ

90° Chamfer

Precise Chamfering

Straight-Flute Design

Стабильная резка

Твердый карбид

Высокая износостойкость

2F / 3F Options

Flexible Size Selection

90° Straight-Flute Carbide Chamfer Mill

Это 90° straight-flute solid carbide chamfer mill предназначен для 45° edge chamfering, hole-mouth chamfering and deburring. Доступно в 2- and 3-flute configurations, with standard and extended lengths to suit different access requirements.

Основные области применения

Снятие фаски по краям

45° edge chamfers using a 90° cutter.

Hole Chamfering

Controlled chamfers around machined holes.

CNC Deburring

Burr removal from edges and hole entrances.

Материалы заготовок

Stainless Steel · Steel · Alloy Steel · Cast Iron

Основные характеристики

90° Chamfer Geometry

Consistent Edge Chamfers

Straight-Flute Design

Controlled Edge Cutting

Корпус из цельного твердого карбида

Rigidity & Wear Resistance

2- & 3-Flute Options

Size-Matched Configurations

Available Configurations

The HY-155 series covers Ø1–Ø20 мм reference cutting diameters, with 2 flutes for smaller sizes and 3 flutes for larger sizes. Selected diameters are available in 100 mm and 150 mm overall lengths.

Диаметр реза

Ø1–Ø20 мм

Угол фаски

90°

Флейта

2-й этаж / 3-й этаж

Общая длина

50–150 mm

Sizes and flute counts vary by diameter. See Specifications & Sizes for exact combinations.

Tool Design & Cutting Edge Details

Detailed views of the carbide chamfer mill geometry, cutting edges and flute configurations.

Solid carbide straight-flute chamfer mill design details

Carbide chamfer mill cutting edge detail

Straight-flute chamfer cutter chip evacuation detail

Carbide chamfer end mill surface finish and coating detail

Two-flute carbide chamfer mill cutting geometry

CNC carbide chamfer mill edge finishing application

Галерея товаров

Coated solid carbide chamfer mill product view

Straight-flute carbide chamfer mill cutting edge close-up

Three coated solid carbide chamfer cutters

Coated carbide chamfer mills with different cutting angles

90° Chamfer Mill Dimensions & Specifications

HY-155 straight-flute solid carbide chamfer mill for CNC edge chamfering, hole chamfering and deburring. Reference sizes: Ø1–Ø20 mm with 2/3-flute and long-reach options.

90 degree straight flute carbide chamfer mill dimensional drawing

Размеры: CD = Cutting Diameter · A = Included Angle · SD = Shank Diameter · F = Flutes · TL = Total Length. All dimensions in mm.

Standard & Long-Reach Chamfer Mill Sizes

HY-155 reference sizes for 90° carbide chamfer cutters, including standard and extended-length configurations. Selected diameters also offer 60°/120° angles.

Scroll to view all 24 reference configurations.

Series CD (mm) Угол A SD (mm) Флейты TL (mm)
HY-155 1.0 90° 4 2F 50
HY-155 1.2 90° 4 2F 50
HY-155 1.5 90° 4 2F 50
HY-155 2.0 90° 4 2F 50
HY-155 2.5 90° 4 2F 50
HY-155 3.0 60° / 90° / 120° 4 3F 50
HY-155 4.0 60° / 90° / 120° 4 3F 50
HY-155 5.0 60° / 90° / 120° 5 3F 50
HY-155 6.0 60° / 90° / 120° 6 3F 50
HY-155 8.0 60° / 90° / 120° 8 3F 60
HY-155 10.0 60° / 90° / 120° 10 3F 75
HY-155 12.0 60° / 90° / 120° 12 3F 75
HY-155 14.0 90° 14 3F 80
HY-155 16.0 90° 16 3F 80
HY-155 20.0 90° 20 3F 100
Extended-Length Options — 100 mm
HY-155 4.0 90° 4 3F 100
HY-155 6.0 90° 6 3F 100
HY-155 8.0 90° 8 3F 100
HY-155 10.0 90° 10 3F 100
HY-155 12.0 90° 12 3F 100
Extended-Length Options — 150 mm
HY-155 8.0 90° 8 3F 150
HY-155 10.0 90° 10 3F 150
HY-155 12.0 90° 12 3F 150

Reference configurations only. Confirm the selected angle, diameter, flute count and overall length before ordering.

Chamfering & Tool Selection Notes

  • Chamfer Size: Control cutting depth to achieve the required edge chamfer.
  • Long-Reach Tools: Minimize overhang and verify toolholding rigidity.
  • Material Matching: Select suitable cutting geometry and coating for steel, stainless steel, alloy steel or cast iron.

90° Carbide Chamfer Mill Customization

Пользовательское cutting diameters, chamfer angles, flute counts, shank sizes, overall lengths, cutting-edge geometry and coatings are available for application-specific requirements.

Качество, контроль и доставка

Our solid carbide square end mills undergo material checks, precision grinding and final inspection to ensure consistent dimensions, cutting edges and coating quality.

Контролируемое производство и итоговый контроль качества квадратных концевых фрез из цельного твердого сплава

Часто задаваемые вопросы о продуктах и их применении

Common questions about 90° straight-flute carbide chamfer mills for CNC edge chamfering, hole chamfering and deburring.

What is a 90° carbide chamfer mill used for?
A 90° carbide chamfer mill is used for CNC edge chamfering, hole chamfering and deburring on machined components.
What is the difference between straight-flute and spiral-flute chamfer mills?
Straight-flute chamfer mills have axial cutting edges, while spiral-flute cutters use helical edges. Selection depends on material, chip control and machining conditions.
What materials can this carbide chamfer cutter machine?
К числу подходящих областей применения относятся steel, stainless steel, alloy steel and cast iron. Cutting geometry, coating and parameters should be matched to the material.
Can this tool chamfer and deburr drilled holes?
Yes. It supports hole-edge chamfering and deburring when tool clearance and hole dimensions are suitable. It is not intended for spot drilling or flat-bottom counterboring.
Does a 90° chamfer mill produce a 45° chamfer?
Yes. A 90° included-angle cutter can produce a 45° edge chamfer with the correct tool orientation and cutting depth.

Часто задаваемые вопросы о размерах, индивидуальной настройке и OEM-производстве

Size selection and ordering information for CNC cutting tool distributors, importers and OEM buyers.

What sizes and flute counts are available?
HY-155 reference sizes cover Ø1–Ø20 мм, with 2-flute and 3-flute designs depending on diameter. See the Specifications & Sizes tab for exact combinations.
Are long-reach chamfer mills available?
Yes. Selected models offer 100 mm and 150 mm overall lengths. Confirm the required diameter and toolholding setup before ordering.
Can chamfer angles and tool dimensions be customized?
Да. Custom chamfer angles, cutting diameters, flute counts, shank sizes, lengths and coatings can be reviewed. Selected standard sizes also offer 60° and 120° angles.
Do you support private labels and mixed-size orders?
Да. OEM marking, private-label packaging and mixed-size orders can be arranged according to specifications and quantities.
Какая информация необходима для составления коммерческого предложения?
Укажите cutting diameter, chamfer angle, shank size, overall length, workpiece material and quantity. Include drawings for custom requirements.

Вам нужны размеры, цены или индивидуальные варианты?

Отправьте нам технические характеристики и количество товара для получения ценового предложения.

  • Стандартные размеры
  • Небольшие пробные заказы
  • Разные размеры
  • OEM и индивидуальные заказы
Посмотреть QR-код — связаться с отделом продаж в WeChat
QR-код WeChat компании «HY Cutting Tools»

Отсканируйте QR-код, чтобы связаться с нами в WeChat.

Запрос о продукции HY

WeChat

QR-код WeChat компании «HY Cutting Tools»

Отсканируйте QR-код, чтобы связаться с нами в WeChat.

Сопутствующие товары