Dao phay vát mép hợp kim nguyên khối rãnh thẳng 90° cho vát mép & Phá ba via

This 90° straight-flute carbide chamfer mill provides CNC chamfering and deburring for steel, stainless steel, alloy steel and cast iron.

Product Configurations

Chamfer Angle:
90°
Đường kính cắt:
Ø1–Ø20 mm
Số lượng sáo:
2F / 3F by Size
Tool Material:
Carbide nguyên khối
Vật liệu phôi:
Steel / Stainless Steel / Alloy Steel / Cast Iron
Ứng dụng:
Edge Chamfering / Hole Chamfering / Deburring
Yêu cầu báo giá Trò chuyện trên WhatsApp
TỐT NHẤT DÀNH CHO

90° Chamfer

Precise Chamfering

Straight-Flute Design

Cắt ổn định

Carbide nguyên khối

High Wear Resistance

2F / 3F Options

Flexible Size Selection

90° Straight-Flute Carbide Chamfer Mill

Điều này 90° straight-flute solid carbide chamfer mill được thiết kế dành cho 45° edge chamfering, hole-mouth chamfering and deburring. Available in 2- and 3-flute configurations, with standard and extended lengths to suit different access requirements.

Các ứng dụng chính

Edge Chamfering

45° edge chamfers using a 90° cutter.

Hole Chamfering

Controlled chamfers around machined holes.

CNC Deburring

Burr removal from edges and hole entrances.

Vật liệu phôi

Stainless Steel · Steel · Alloy Steel · Cast Iron

Các tính năng chính

90° Chamfer Geometry

Consistent Edge Chamfers

Straight-Flute Design

Controlled Edge Cutting

Solid Carbide Body

Rigidity & Wear Resistance

2- & 3-Flute Options

Size-Matched Configurations

Available Configurations

The HY-155 series covers Ø1–Ø20 mm reference cutting diameters, with 2 flutes for smaller sizes and 3 flutes for larger sizes. Selected diameters are available in 100 mm and 150 mm overall lengths.

Đường kính cắt

Ø1–Ø20 mm

Chamfer Angle

90°

Số lượng sáo

2F / 3F

Chiều dài tổng thể

50–150 mm

Sizes and flute counts vary by diameter. See Specifications & Sizes for exact combinations.

Tool Design & Cutting Edge Details

Detailed views of the carbide chamfer mill geometry, cutting edges and flute configurations.

Solid carbide straight-flute chamfer mill design details

Carbide chamfer mill cutting edge detail

Straight-flute chamfer cutter chip evacuation detail

Carbide chamfer end mill surface finish and coating detail

Two-flute carbide chamfer mill cutting geometry

CNC carbide chamfer mill edge finishing application

Thư viện sản phẩm

Coated solid carbide chamfer mill product view

Straight-flute carbide chamfer mill cutting edge close-up

Three coated solid carbide chamfer cutters

Coated carbide chamfer mills with different cutting angles

90° Chamfer Mill Dimensions & Specifications

HY-155 straight-flute solid carbide chamfer mill for CNC edge chamfering, hole chamfering and deburring. Reference sizes: Ø1–Ø20 mm with 2/3-flute and long-reach options.

90 degree straight flute carbide chamfer mill dimensional drawing

Kích thước: CD = Cutting Diameter · A = Included Angle · SD = Shank Diameter · F = Flutes · TL = Total Length. All dimensions in mm.

Standard & Long-Reach Chamfer Mill Sizes

HY-155 reference sizes for 90° carbide chamfer cutters, including standard and extended-length configurations. Selected diameters also offer 60°/120° angles.

Scroll to view all 24 reference configurations.

Loạt phim CD (mm) Angle A SD (mm) Sáo TL (mm)
HY-155 1.0 90° 4 2F 50
HY-155 1.2 90° 4 2F 50
HY-155 1.5 90° 4 2F 50
HY-155 2.0 90° 4 2F 50
HY-155 2.5 90° 4 2F 50
HY-155 3.0 60° / 90° / 120° 4 3F 50
HY-155 4.0 60° / 90° / 120° 4 3F 50
HY-155 5.0 60° / 90° / 120° 5 3F 50
HY-155 6.0 60° / 90° / 120° 6 3F 50
HY-155 8.0 60° / 90° / 120° 8 3F 60
HY-155 10.0 60° / 90° / 120° 10 3F 75
HY-155 12.0 60° / 90° / 120° 12 3F 75
HY-155 14.0 90° 14 3F 80
HY-155 16.0 90° 16 3F 80
HY-155 20.0 90° 20 3F 100
Extended-Length Options — 100 mm
HY-155 4.0 90° 4 3F 100
HY-155 6.0 90° 6 3F 100
HY-155 8.0 90° 8 3F 100
HY-155 10.0 90° 10 3F 100
HY-155 12.0 90° 12 3F 100
Extended-Length Options — 150 mm
HY-155 8.0 90° 8 3F 150
HY-155 10.0 90° 10 3F 150
HY-155 12.0 90° 12 3F 150

Reference configurations only. Confirm the selected angle, diameter, flute count and overall length before ordering.

Chamfering & Tool Selection Notes

  • Chamfer Size: Control cutting depth to achieve the required edge chamfer.
  • Long-Reach Tools: Minimize overhang and verify toolholding rigidity.
  • Material Matching: Select suitable cutting geometry and coating for steel, stainless steel, alloy steel or cast iron.

90° Carbide Chamfer Mill Customization

Tùy chỉnh cutting diameters, chamfer angles, flute counts, shank sizes, overall lengths, cutting-edge geometry and coatings are available for application-specific requirements.

Chất lượng, Kiểm tra và Giao hàng

Our solid carbide square end mills undergo material checks, precision grinding and final inspection to ensure consistent dimensions, cutting edges and coating quality.

Quy trình sản xuất được kiểm soát chặt chẽ và kiểm tra cuối cùng đối với dao phay đầu vuông bằng hợp kim cứng

Câu hỏi thường gặp về sản phẩm và ứng dụng

Common questions about 90° straight-flute carbide chamfer mills for CNC edge chamfering, hole chamfering and deburring.

What is a 90° carbide chamfer mill used for?
A 90° carbide chamfer mill is used for CNC edge chamfering, hole chamfering and deburring on machined components.
What is the difference between straight-flute and spiral-flute chamfer mills?
Straight-flute chamfer mills have axial cutting edges, while spiral-flute cutters use helical edges. Selection depends on material, chip control and machining conditions.
What materials can this carbide chamfer cutter machine?
Suitable applications include steel, stainless steel, alloy steel and cast iron. Cutting geometry, coating and parameters should be matched to the material.
Can this tool chamfer and deburr drilled holes?
Yes. It supports hole-edge chamfering and deburring when tool clearance and hole dimensions are suitable. It is not intended for spot drilling or flat-bottom counterboring.
Does a 90° chamfer mill produce a 45° chamfer?
Yes. A 90° included-angle cutter can produce a 45° edge chamfer with the correct tool orientation and cutting depth.

Câu hỏi thường gặp về kích thước, tùy chỉnh và OEM

Size selection and ordering information for CNC cutting tool distributors, importers and OEM buyers.

What sizes and flute counts are available?
HY-155 reference sizes cover Ø1–Ø20 mm, with 2-flute and 3-flute designs depending on diameter. See the Specifications & Sizes tab for exact combinations.
Are long-reach chamfer mills available?
Yes. Selected models offer 100 mm and 150 mm overall lengths. Confirm the required diameter and toolholding setup before ordering.
Can chamfer angles and tool dimensions be customized?
Đúng vậy. Custom chamfer angles, cutting diameters, flute counts, shank sizes, lengths and coatings can be reviewed. Selected standard sizes also offer 60° and 120° angles.
Do you support private labels and mixed-size orders?
Đúng vậy. OEM marking, private-label packaging and mixed-size orders can be arranged according to specifications and quantities.
Cần những thông tin nào để lập báo giá?
Cung cấp cutting diameter, chamfer angle, shank size, overall length, workpiece material and quantity. Include drawings for custom requirements.

Bạn cần biết thông tin về kích cỡ, giá cả hoặc các tùy chọn đặt hàng theo yêu cầu?

Vui lòng gửi thông số kỹ thuật và số lượng để nhận báo giá.

  • Kích thước tiêu chuẩn
  • Các lệnh xét xử sơ thẩm nhỏ
  • Các kích cỡ khác nhau
  • OEM & Dụng cụ theo yêu cầu
Xem mã QR – Liên hệ bộ phận bán hàng qua WeChat
Mã QR WeChat của HY Cutting Tools

Quét mã để liên hệ với chúng tôi trên WeChat.

Yêu cầu thông tin về sản phẩm HY

WeChat

Mã QR WeChat của HY Cutting Tools

Quét mã để liên hệ với chúng tôi trên WeChat.

Sản phẩm liên quan