CNC 목재 절단 및 슬롯 가공용 2날 솔리드 카바이드 나선형 라우터 비트
2-flute solid carbide spiral router bits for CNC wood cutting, slotting and profiling. Combined upcut and downcut geometry helps reduce tear-out on both faces of plywood and laminated panels. Small-batch orders, custom sizes and laser marking are available.
지오메트리: 2 flutes · Combined upcut / downcut
Sizes: Ø3.175–20 mm · Custom diameter, flute length, shank and overall length
자료: Plywood / MDF / Solid Wood / Laminated Panels
최소 주문 수량(MOQ): 3–10 pcs per size, depending on specification
속보: Typically 1–3 working days for in-stock items
OEM 옵션: Laser marking · Customer logo · Private-label packaging
Order Options: Trial orders · Mixed sizes by confirmation · Individual protective boxes
Clean Panel Edges
2-Flute Geometry
솔리드 카바이드
맞춤형 크기
2-Flute Solid Carbide Spiral Router Bit Overview
These 2-flute solid carbide spiral router bits support CNC wood cutting, slotting and profiling. Combined upcut and downcut geometry helps reduce tear-out on both faces of plywood and laminated panels when the cutting depth matches the flute configuration.
Designed for furniture components, cabinet panels and general woodworking, with standard sizes and custom dimensions for distributor and OEM orders.
Router bit production process.
Cleaner Edges on Both Panel Faces
Opposing cutting directions help limit surface lifting and edge breakout when cutting panels with two visible faces.
Combined Geometry: Upcut and downcut sections help protect opposite panel faces.
2-Flute Design: Spiral cutting edges for routing, slotting and contour cutting.
Solid Carbide: Rigid construction for CNC woodworking.
Custom Dimensions: Diameter, flute length, shank and overall length options.
Selection point: Match the lower upcut-section length to panel thickness and cutting depth. Shallow cuts may not engage both sections.
Product at a Glance
Cutting Geometry Details

Helical flute layout for woodworking cuts and chip movement.

Match the end geometry and entry method to the intended operation.

Opposing cutting sections help reduce tear-out on both panel faces.
재료 및 응용 분야
For MDF, solid wood, plywood, melamine-faced panels and wood-veneered boards. Particularly useful for panel cutting where both top and bottom edge quality matter.

최적 대상: Through-cut profiles in plywood, veneered boards and laminated panels with both cutting sections correctly engaged.
Conditional: Slots and pockets require adequate chip clearance; shallow cuts may not benefit from the combined geometry.
다음과 같은 경우에는 적합하지 않습니다: Metal machining or deep enclosed slots with insufficient chip evacuation.
Product & Packaging
Protective boxes help shield cutting edges during handling and shipment. Confirm tool sizes, quantities and OEM marking requirements when ordering.



사양 및 사이즈 표
Reference sizes for the 2-flute solid carbide spiral router bit.
Dimensions are listed as cutting diameter × flute length × shank diameter × overall length.
All dimensions are in millimeters.
| Size: d × H × D × L | Cutting Ød | Flute Length H | 샹크 직경 Ø D | L |
|---|---|---|---|---|
| 3.175 × 12 × 3.175 × 50 | 3.175 | 12 | 3.175 | 50 |
| 3.175 × 15 × 3.175 × 50 | 3.175 | 15 | 3.175 | 50 |
| 3.175 × 17 × 3.175 × 50 | 3.175 | 17 | 3.175 | 50 |
| 3.175 × 22 × 3.175 × 50 | 3.175 | 22 | 3.175 | 50 |
| 4 × 17 × 4 × 50 | 4 | 17 | 4 | 50 |
| 4 × 22 × 4 × 50 | 4 | 22 | 4 | 50 |
| 4 × 25 × 4 × 50 | 4 | 25 | 4 | 50 |
| 4 × 32 × 4 × 70 | 4 | 32 | 4 | 70 |
| 5 × 17 × 5 × 50 | 5 | 17 | 5 | 50 |
| 5 × 22 × 5 × 50 | 5 | 22 | 5 | 50 |
| 6 × 17 × 6 × 50 | 6 | 17 | 6 | 50 |
| 6 × 22 × 6 × 50 | 6 | 22 | 6 | 50 |
| 6 × 25 × 6 × 60 | 6 | 25 | 6 | 60 |
| 6 × 32 × 6 × 70 | 6 | 32 | 6 | 70 |
| 8 × 22 × 8 × 60 | 8 | 22 | 8 | 60 |
| 8 × 25 × 8 × 60 | 8 | 25 | 8 | 60 |
| 8 × 32 × 8 × 70 | 8 | 32 | 8 | 70 |
| 8 × 45 × 8 × 80 | 8 | 45 | 8 | 80 |
| 10 × 35 × 10 × 75 | 10 | 35 | 10 | 75 |
| 10 × 45 × 10 × 90 | 10 | 45 | 10 | 90 |
| 10 × 52 × 10 × 100 | 10 | 52 | 10 | 100 |
| 12 × 35 × 12 × 80 | 12 | 35 | 12 | 80 |
| 12 × 52 × 12 × 100 | 12 | 52 | 12 | 100 |
| 12.7 × 35 × 12.7 × 80 | 12.7 | 35 | 12.7 | 80 |
| 12.7 × 52 × 12.7 × 100 | 12.7 | 52 | 12.7 | 100 |
| 14 × 52 × 14 × 100 | 14 | 52 | 14 | 100 |
| 16 × 52 × 16 × 110 | 16 | 52 | 16 | 110 |
| 16 × 62 × 16 × 120 | 16 | 62 | 16 | 120 |
| 16 × 72 × 16 × 130 | 16 | 72 | 16 | 130 |
| 18 × 52 × 18 × 110 | 18 | 52 | 18 | 110 |
| 18 × 72 × 18 × 130 | 18 | 72 | 18 | 130 |
| 20 × 52 × 20 × 120 | 20 | 52 | 20 | 120 |
| 20 × 72 × 20 × 130 | 20 | 72 | 20 | 130 |
사이즈, 가격 또는 맞춤 제작 옵션이 필요하신가요?
Send the required dimensions, panel material, thickness and quantity for size matching and quotation.
Cutting Data & Setup
Request starting parameters for the selected tool size and panel material. The supplied speed chart does not establish cutting settings for the Ø3.175–20 mm sizes listed above.
| 매개변수 | 선정 지침 |
|---|---|
| 스핀들 속도(n) | Confirm the operating RPM and maximum permissible speed for the exact tool. |
| 피드 속도(Vf) | Calculate from confirmed chip load: Vf = n × 2 × fz. |
| Chip Load (fz) | Select by diameter, material, engagement and machine rigidity; numerical values require confirmation. |
| Cutting Depth & Width | Confirm axial depth and radial engagement for slotting or profiling; do not use flute length as a depth recommendation. |
| Combined-Geometry Engagement | Match the lower upcut-section length to panel thickness and programmed depth. |
| Workholding & Chip Removal | Use secure panel support, suitable clamping and effective extraction; monitor chip accumulation in enclosed slots. |
Formula units: n in RPM, fz in mm/tooth and Vf in mm/min. The flute count is 2. A confirmed chip-load value is required before calculating feed.
General Router Speed Reference
The following values reproduce the metric diameter labels and maximum-speed figures in the supplied general chart. These larger diameters fall outside this product’s listed size range.
| Diameter Label in Source | Maximum Speed Shown |
|---|---|
| 25mm | 24,000 RPM |
| 30–50 mm | 18,000 RPM |
| 55–65 mm | 16,000 RPM |
| 75–90 mm | 12,000 RPM |
General reference only. Do not extrapolate these limits to smaller tools or treat maximum speed as recommended cutting speed. Follow the confirmed tool, spindle and holder limits.
자주 묻는 질문
What materials can these spiral router bits cut?
These solid carbide router bits are intended for MDF, solid wood, plywood, melamine-faced panels and wood-veneered boards. The combined cutting geometry is particularly useful for panels requiring clean edges on both faces. They are not intended for metal machining.
How does the bit help reduce chipping on plywood and laminated panels?
Combined upcut and downcut sections help reduce tear-out on the bottom and top faces respectively. This is commonly called compression geometry. Both sections must engage the panel correctly; edge quality also depends on tool sharpness, workholding and cutting parameters.
Can I use this router bit for slots and pockets?
Yes, where the selected tool geometry and entry method suit the operation. Shallow slots may engage only the lower upcut section, so the top-edge benefit may be limited. Deep enclosed slots require effective chip removal. Confirm the end-cutting geometry before direct plunging.
How do I choose the diameter and flute length?
Choose the diameter for the required slot width, internal corner radius and machine capacity. Select enough flute length for the panel thickness while keeping tool overhang short. For combined geometry, also confirm the lower upcut-section length. Flute length is not a recommended single-pass cutting depth.
What spindle speed and feed rate should I use?
Starting settings depend on tool diameter, flute length, panel material, cutting depth and machine rigidity. Send your tool size and application for parameter review. A general maximum-speed chart does not establish the recommended operating speed or feed for every size.
Can I order custom sizes or private-label router bits?
Yes. Cutting diameter, flute length, shank diameter and overall length can be reviewed from your drawing or sample. Mixed-size orders, marking and private-label packaging are available by confirmation. Send quantities per size so we can confirm availability, minimum order and lead time.
Need help selecting a size? Send your panel material, thickness and required tool dimensions.
사이즈, 가격 또는 맞춤 제작 옵션이 필요하신가요?
견적 요청을 위해 사양과 수량을 보내주십시오.
- 표준 크기
- 소액 재판 명령
- 다양한 사이즈
- OEM 및 맞춤형 제작
QR 코드 보기 – 위챗으로 영업팀에 문의하기
위챗으로 문의하시려면 QR 코드를 스캔하세요.
위챗
위챗으로 문의하시려면 QR 코드를 스캔하세요.
















