HRC55 2날 솔리드 카바이드 볼 노즈 엔드밀 (금형강용)
Precision Contouring
Smooth curved-surface and mold finishing
TiSiN 코팅
Wear resistance for steel milling
Optimized Geometry
Stable cutting and chip evacuation
표준 크기
R0.5–R10 mm for repeat orders
TiSiN-Coated Carbide Ball Nose End Mill for Mold Steel
이 2-flute solid carbide ball end mill for mold steel supports 3D contouring, cavity finishing and curved profiles in selected mold and tool steels. Its full-radius tip follows curved surfaces, while two flutes provide chip space. Select the ball radius, cutting length and machining parameters to suit the part geometry and actual steel hardness.
주요 기능
Full-Radius Ball Nose
Smooth 3D contouring and curved-surface finishing.
2-Flute Geometry
Stable cutting with effective chip evacuation.
TiSiN-Coated Carbide
Wear resistance for steel and mold finishing.
표준 미터법 규격
R0.5–R10 mm options for repeat supply.
Cutting Geometry & Performance Features
Precision Ball-Nose Cutting Geometry
Optimized relief angle, dual center-cutting edges and a rounded ball-nose profile reduce friction 그리고 support stable cutting, smooth 3D contouring and precision mold finishing.
Multi-Layer Composite Coating
An advanced multi-layer coating enhances corrosion, friction and 내마모성, supporting 공구 수명 연장 and stable steel milling.
Optimized Helix Angle & Chip Evacuation
Precision-ground helix geometry and optimized flute grooves reduce chip buildup, supporting stable milling and efficient chip evacuation.
Chamfered Shank for Easy Tool Installation
Smooth shank finish and precision chamfering enable easy tool installation, faster tool changes and improved machining efficiency.
HRC55 Ball Nose End Mill Series
Standard 2-flute carbide ball nose end mill for mold steel machining.
권장 공작물 재료
그리고 HRC55 2-flute carbide ball nose end mill for mold steel supports 3D contouring 그리고 mold finishing in selected steel grades. Choose cutting conditions based on material hardness.
| 공작물 재질 | Common Steel Grades |
|---|---|
| 합금강 | AISI 4140, 4340, 42CrMo4, SCM440 |
| Ordinary Steel | AISI 1018, 1020, S235JR, Q235 |
| Pre-hardened Steel | P20, 1.2311, 1.2738, 718H |
| 탄소강 | AISI 1045, 1050, C45, S45C |
재료 관련 참고 사항: Listed grades are references only. Confirm hardness, heat treatment and machining conditions before use.
HRC55 Ball Nose End Mill Specifications
표준 HRC55 2-flute carbide ball nose end mill for mold steel for 3D contouring, steel milling and precision mold finishing.
| 매개변수 | 사양 |
|---|---|
| 도구 유형 | Solid Carbide Ball Nose End Mill |
| 기판 | 미세 입자 초경합금 |
| 플루트 | 2 |
| 경도 시리즈 | HRC55 |
| 나선 각도 | 35° Reference |
| 코팅 | TiSiN |
| Ball Radius | R0.5-R10 mm |
| 애플리케이션 | 3D Contouring, Mold & Steel Finishing |
*HRC55 suitability depends on steel grade, hardness and machining conditions.
Standard Ball Nose End Mill Sizes
HRC55 2-flute carbide ball nose end mill reference sizes. Scroll to view all dimensions in mm.
| 사양 | SHANK | D | FLUTE | RADIUS R | OAL |
|---|---|---|---|---|---|
| R1.5×6×D3×50L | 3 | 3 | 6 | 1.5 | 50 |
| R1.5×6×D3×75L | 3 | 3 | 6 | 1.5 | 75 |
| R1.5×6×D3×100L | 3 | 3 | 6 | 1.5 | 100 |
| R0.5×2×D4×50L | 4 | 1 | 2 | 0.5 | 50 |
| R0.75×3×D4×50L | 4 | 1.5 | 3 | 0.75 | 50 |
| R1×4×D4×50L | 4 | 2 | 4 | 1 | 50 |
| R1.25×5×D4×50L | 4 | 2.5 | 5 | 1.25 | 50 |
| R1.5×6×D4×50L | 4 | 3 | 6 | 1.5 | 50 |
| R1.75×7×D4×50L | 4 | 3.5 | 7 | 1.75 | 50 |
| R2×8×D4×50L | 4 | 4 | 8 | 2 | 50 |
| R2×8×D4×75L | 4 | 4 | 8 | 2 | 75 |
| R2×8×D4×100L | 4 | 4 | 8 | 2 | 100 |
| R2.5×10×D5×50L | 5 | 5 | 10 | 2.5 | 50 |
| R2.5×10×D5×75L | 5 | 5 | 10 | 2.5 | 75 |
| R2.5×10×D5×100L | 5 | 5 | 10 | 2.5 | 100 |
| R2.5×10×D6×50L | 6 | 5 | 10 | 2.5 | 50 |
| R3×12×D6×50L | 6 | 6 | 12 | 3 | 50 |
| R3×12×D6×75L | 6 | 6 | 12 | 3 | 75 |
| R3×12×D6×100L | 6 | 6 | 12 | 3 | 100 |
| R3×12×D6×150L | 6 | 6 | 12 | 3 | 150 |
| R1.5×6×D6×50L | 6 | 3 | 6 | 1.5 | 50 |
| R3.5×14×D8×60L | 8 | 7 | 14 | 3.5 | 60 |
| R4×16×D8×60L | 8 | 8 | 16 | 4 | 60 |
| R4×16×D8×75L | 8 | 8 | 16 | 4 | 75 |
| R4×16×D8×100L | 8 | 8 | 16 | 4 | 100 |
| R4×16×D8×150L | 8 | 8 | 16 | 4 | 150 |
| R4.5×18×D10×75L | 10 | 9 | 18 | 4.5 | 75 |
| R5×20×D10×75L | 10 | 10 | 20 | 5 | 75 |
| R5×20×D10×100L | 10 | 10 | 20 | 5 | 100 |
| R5×20×D10×150L | 10 | 10 | 20 | 5 | 150 |
| R5.5×22×D12×75L | 12 | 11 | 22 | 5.5 | 75 |
| R6×24×D12×75L | 12 | 12 | 24 | 6 | 75 |
| R6×24×D12×100L | 12 | 12 | 24 | 6 | 100 |
| R6×24×D12×150L | 12 | 12 | 24 | 6 | 150 |
| R6.5×26×D14×100L | 14 | 13 | 26 | 6.5 | 100 |
| R7×28×D14×80L | 14 | 14 | 28 | 7 | 80 |
| R7×28×D14×100L | 14 | 14 | 28 | 7 | 100 |
| R7×28×D14×150L | 14 | 14 | 28 | 7 | 150 |
| R8×32×D16×100L | 16 | 16 | 32 | 8 | 100 |
| R8×32×D16×150L | 16 | 16 | 32 | 8 | 150 |
| R9×36×D18×100L | 18 | 18 | 36 | 9 | 100 |
| R9×36×D18×150L | 18 | 18 | 36 | 9 | 150 |
| R10×40×D20×100L | 20 | 20 | 40 | 10 | 100 |
| R10×40×D20×150L | 20 | 20 | 40 | 10 | 150 |
Need HRC55 Ball Nose End Mill Sizes?
Contact us for standard sizes, mixed-size orders and availability.
맞춤 제작 및 OEM
유통업체 및 OEM 프로그램을 위해 맞춤형 치수, 형상 및 자체 브랜드 옵션이 제공됩니다.
Drawing- and sample-based customization is available for mold steel contouring and finishing applications.
품질, 검사 및 납품
Our carbide ball nose end mill for mold steel are controlled through material verification, precision grinding, in-process measurement and final inspection. See our 제조 및 품질 관리 공정 자세한 내용은 다음을 참조하십시오.
실무에서의 공구 검사 — 포장 전 주요 치수, 형상 및 절삭날 상태 확인.
3단계 품질 관리
검사 체크포인트는 치수 일관성과 재주문 관리를 지원합니다.
포장 및 배송
보호용 및 수출용 포장 방식은 주문 수량과 선적 요건에 따라 결정됩니다.
보호 포장
대량 및 수출용 포장
HRC55 Ball Nose End Mill FAQs
자주 묻는 질문 HRC55 2-flute carbide ball nose end mill for mold steel, 3D contouring and mold finishing.
What is a 2-flute ball nose end mill used for?
What steel grades can an HRC55 ball nose end mill machine?
Can this carbide ball nose end mill cut 55 HRC steel?
Ball nose vs square end mill: Which is better for 3D finishing?
2-flute vs 4-flute ball nose end mill: What is the difference?
How does step-over affect ball nose surface finish?
What is the difference between ball nose radius and diameter?
Sizes & Ordering FAQs
Standard ball nose end mill sizes, distributor orders and OEM options.
What standard HRC55 ball nose end mill sizes are available?
Can distributors order mixed sizes and OEM ball nose end mills?
How do I request a quote for HRC55 ball nose end mills?
기술 자료 다운로드
Solid carbide end mill catalog and reference cutting data.
사이즈, 가격 또는 맞춤 제작 옵션이 필요하신가요?
견적 요청을 위해 사양과 수량을 보내주십시오.
- 표준 크기
- 소액 재판 명령
- 다양한 사이즈
- OEM 및 맞춤형 제작
QR 코드 보기 – 위챗으로 영업팀에 문의하기
위챗으로 문의하시려면 QR 코드를 스캔하세요.
위챗
위챗으로 문의하시려면 QR 코드를 스캔하세요.
