3날 초경 테이퍼형 사각 엔드밀 – 0.5°–30°
Micro-tip carbide end mills for precision milling of drafted walls, tapered slots and flat-bottom features, with configurations for aluminum and steel.
3-플루트 설계
안정적인 절단
0.5°–30° Taper
Multiple Angles
Micro-Tip Geometry
Fine Features
Square-End Profile
Flat-Bottom Milling
3-Flute Carbide Tapered Square End Mill Overview
이 3-flute solid carbide tapered square end mill ~을 위해 설계되었습니다 drafted walls, narrow tapered slots and flat-bottom mold features. 다음 언어로 제공됩니다. 0.5°–30° taper angles and Ø0.3–Ø2.0 mm tip diameters, with cutting geometry and coatings matched to aluminum or steel applications.
Tapered Milling Features & Demonstration
Precision Tapered Features
Straight end mills cannot directly match angled walls. This tapered square end mill provides angle-specific geometry for narrow profiles and flat-bottom features.
초안으로 작성된 벽
Angle-matched side cutting for tapered wall profiles.
Narrow Tapered Slots
Micro-tip options for small slots and tapered details.
Flat-Bottom Features
Square-end geometry for flat-bottom tapered pockets.
주요 제품 장점
3-플루트 설계
Balanced Edge Support
Multiple Taper Angles
Angle-Specific Profiles
Micro-Tip Geometry
Fine Feature Access
Square-End Profile
Flat-Bottom Milling
Applications & Material Selection
최상의 대상
· Drafted-Wall Milling
· Tapered Slot Milling
· Angled Pocket Features
· Flat-Bottom Tapered Profiles
Material-Specific Options
· Aluminum Alloys
Sharp cutting edges and chip-evacuation geometry.
· Steel
Application-matched edge strength and coating.
선정 참고 사항: Confirm taper angle definition, tip diameter, cutting length and workpiece material before ordering. Direct plunging depends on the selected center-cutting geometry.
제품 갤러리
Product views, tapered geometry and application-specific cutting features.
Carbide Tapered Square End Mill Specifications
Reference specifications for the 3-flute micro-tip tapered square end mill series.
치수 및 표준 규격
Select the tip diameter, taper angle and cutting length. All dimensions are in mm.
D = Tip Diameter | α = Taper Angle | L1 = Tapered Length | d = Shank | L = OAL
모든 사이즈를 보려면 아래로 스크롤하세요
| 사양 | TIP D | TAPER α | L1 | SHANK d | OAL L |
|---|---|---|---|---|---|
| D0.3×10°×10.5×D4×45L | 0.3 | 10° | 10.5 | 4 | 45 |
| D0.3×15°×6.9×D4×45L | 0.3 | 15° | 6.9 | 4 | 45 |
| D0.3×20°×5×D4×45L | 0.3 | 20° | 5 | 4 | 45 |
| D0.3×30°×3.2×D4×45L | 0.3 | 30° | 3.2 | 4 | 45 |
| D0.4×10°×10.2×D4×45L | 0.4 | 10° | 10.2 | 4 | 45 |
| D0.4×15°×6.7×D4×45L | 0.4 | 15° | 6.7 | 4 | 45 |
| D0.4×20°×4.9×D4×45L | 0.4 | 20° | 4.9 | 4 | 45 |
| D0.4×30°×3.1×D4×45L | 0.4 | 30° | 3.1 | 4 | 45 |
| D0.5×10°×9.9×D4×45L | 0.5 | 10° | 9.9 | 4 | 45 |
| D0.5×15°×6.5×D4×45L | 0.5 | 15° | 6.5 | 4 | 45 |
| D0.5×20°×4.8×D4×45L | 0.5 | 20° | 4.8 | 4 | 45 |
| D0.5×30°×3×D4×45L | 0.5 | 30° | 3 | 4 | 45 |
| D0.6×10°×9.6×D4×45L | 0.6 | 10° | 9.6 | 4 | 45 |
| D0.6×15°×6.3×D4×45L | 0.6 | 15° | 6.3 | 4 | 45 |
| D0.6×20°×4.6×D4×45L | 0.6 | 20° | 4.6 | 4 | 45 |
| D0.6×30°×3.9×D4×45L | 0.6 | 30° | 3.9 | 4 | 45 |
| D0.8×10°×9×D4×45L | 0.8 | 10° | 9 | 4 | 45 |
| D0.8×15°×6×D4×45L | 0.8 | 15° | 6 | 4 | 45 |
| D0.8×20°×4.4×D4×45L | 0.8 | 20° | 4.4 | 4 | 45 |
| D0.8×30°×2.8×D4×45L | 0.8 | 30° | 2.8 | 4 | 45 |
| D1.0×0.5°×4×D4×45L | 1.0 | 0.5° | 4 | 4 | 45 |
| D1.0×1°×4×D4×45L | 1.0 | 1° | 4 | 4 | 45 |
| D1.0×1.5°×4×D4×45L | 1.0 | 1.5° | 4 | 4 | 45 |
| D1.0×2°×4×D4×45L | 1.0 | 2° | 4 | 4 | 45 |
| D1.0×3°×4×D4×45L | 1.0 | 3° | 4 | 4 | 45 |
| D1.0×5°×4×D4×45L | 1.0 | 5° | 4 | 4 | 45 |
| D1.0×10°×8.5×D4×45L | 1.0 | 10° | 8.5 | 4 | 45 |
| D1.0×15°×5.6×D4×45L | 1.0 | 15° | 5.6 | 4 | 45 |
| D1.0×20°×4.1×D4×45L | 1.0 | 20° | 4.1 | 4 | 45 |
| D1.0×30°×2.6×D4×45L | 1.0 | 30° | 2.6 | 4 | 45 |
| D1.2×10°×7.9×D4×45L | 1.2 | 10° | 7.9 | 4 | 45 |
| D1.2×15°×5.2×D4×45L | 1.2 | 15° | 5.2 | 4 | 45 |
| D1.2×20°×3.8×D4×45L | 1.2 | 20° | 3.8 | 4 | 45 |
| D1.2×30°×2.4×D4×45L | 1.2 | 30° | 2.4 | 4 | 45 |
| D1.5×0.5°×5×D4×45L | 1.5 | 0.5° | 5 | 4 | 45 |
| D1.5×1°×5×D4×45L | 1.5 | 1° | 5 | 4 | 45 |
| D1.5×1.5°×5×D4×45L | 1.5 | 1.5° | 5 | 4 | 45 |
| D1.5×2°×5×D4×45L | 1.5 | 2° | 5 | 4 | 45 |
| D1.5×3°×5×D4×45L | 1.5 | 3° | 5 | 4 | 45 |
| D1.5×5°×5×D4×45L | 1.5 | 5° | 5 | 4 | 45 |
| D1.5×10°×7×D4×45L | 1.5 | 10° | 7 | 4 | 45 |
| D1.5×15°×4.6×D4×45L | 1.5 | 15° | 4.6 | 4 | 45 |
| D1.5×20°×3.4×D4×45L | 1.5 | 20° | 3.4 | 4 | 45 |
| D1.5×30°×2.2×D4×45L | 1.5 | 30° | 2.2 | 4 | 45 |
| D2.0×0.5°×6×D4×45L | 2.0 | 0.5° | 6 | 4 | 45 |
| D2.0×1°×6×D4×45L | 2.0 | 1° | 6 | 4 | 45 |
| D2.0×1.5°×6×D4×45L | 2.0 | 1.5° | 6 | 4 | 45 |
| D2.0×2°×6×D4×45L | 2.0 | 2° | 6 | 4 | 45 |
| D2.0×3°×6×D4×45L | 2.0 | 3° | 6 | 4 | 45 |
Reference sizes only. Confirm selected dimensions and availability before ordering.
선정 참고 사항
Custom Tapered Square End Mills & OEM Options
사용자 지정 carbide tapered square end mills with options for tip diameter, taper angle, cutting length, shank size, overall length, flute geometry, edge preparation and coating. Drawing-based customization and OEM supply available.
OEM 옵션: Laser marking · Private labels · Custom packaging · Mixed-size orders · Repeat supply. OEM 및 자체 브랜드 서비스
품질 및 검사
Each 3-flute carbide tapered square end mill is inspected for tip diameter, taper angle, tapered cutting length, flute geometry, square-end profile, shank dimensions and tool runout. Cutting-edge condition and coating appearance are also checked against the approved specifications.
Tapered Square End Mill FAQ
Common questions about tapered milling, tool selection, customization and OEM orders.
1. What is a tapered square end mill used for?
It is used for drafted walls, tapered slots, angled pockets and flat-bottom mold features.
2. What taper angles and tip diameters are available?
Reference options cover 0.5°–30° taper angles and Ø0.3–Ø2.0 mm tip diameters. Available combinations vary by size.
3. Is the taper angle measured per side or as an included angle?
Confirm the angle definition using a tool or component drawing before ordering.
4. Can this carbide tapered end mill machine aluminum and steel?
Yes, with material-specific cutting-edge geometry and coating. Confirm the workpiece grade before selection.
5. How does tapered geometry help reduce tool deflection?
A tapered body can improve tool support compared with a straight micro-diameter cutter. Runout, overhang and cutting load still affect stability.
6. Can a tapered square end mill produce flat-bottom features?
Yes. The square-end profile supports flat-bottom machining. Final corner geometry depends on the selected tool design.
7. Can this 3-flute tapered end mill plunge directly?
Only if the selected tool has center-cutting capability. Otherwise, use a suitable ramping or pre-machined entry method.
8. Can you manufacture custom tapered square end mills?
Yes. Custom tip diameters, taper angles, cutting lengths, shanks, edge geometry and coatings can be reviewed from drawings.
9. Do you offer OEM and private-label tapered end mills?
OEM marking, custom labels and branded packaging are available subject to specification and quantity.
10. What information is needed to request a quote?
Provide the workpiece material, tip diameter, taper angle definition, cutting length, tolerance, quantity and drawing if available.
기술 자료 다운로드
초경 엔드밀 카탈로그
Tool types, geometry and reference sizes.
엔드밀 회전 속도 및 이송량 가이드
Starting cutting parameters and adjustments.
Cutting data are general references. Adjust for the selected tool and machining conditions.
사이즈, 가격 또는 맞춤 제작 옵션이 필요하신가요?
견적 요청을 위해 사양과 수량을 보내주십시오.
- 표준 크기
- 소액 재판 명령
- 다양한 사이즈
- OEM 및 맞춤형 제작
QR 코드 보기 – 위챗으로 영업팀에 문의하기
위챗으로 문의하시려면 QR 코드를 스캔하세요.
위챗
위챗으로 문의하시려면 QR 코드를 스캔하세요.
