알루미늄용 120° 3날 DLC 코팅 초경 모따기 밀링 커터

이 120° DLC-coated carbide chamfer mill is designed for precision aluminum chamfering, deburring and V-profile machining.

  • ◆Precision-ground 120° V-profile
  • ◆Stable 3-flute cutting geometry
  • ◆Low-friction DLC coating reduces aluminum adhesion
  • ◆견고한 초경합금 구조

Configuration: 120° / 3 Flutes / DLC Coated / Solid Carbide
절단 직경: Ø6–Ø20 mm
애플리케이션: Aluminum Chamfering / Deburring / V-Profile Milling

견적 받기 WhatsApp에서 채팅하기
최고 FOR

120° V-Profile

정밀한 모따기

DLC Coating

Low Adhesion

3-플루트 설계

안정적인 절단

솔리드 카바이드

높은 강성

120° DLC-Coated Chamfer Mill for Aluminum

이 3-flute DLC-coated solid carbide chamfer mill for aluminum features a 120° included angle for edge chamfering, hole-mouth finishing and deburring. Its low-friction DLC coating helps reduce aluminum adhesion and built-up edge.

 

주요 적용 분야

 

120° Chamfering

Precise 120° chamfering for clean, consistent edge preparation in aluminum alloys.

Edge Deburring

Smooth aluminum edge finishing with reduced burrs and consistent surface quality.

V-Profile Machining

Precision machining of 120° V-shaped profiles and grooves in aluminum alloys.

 

최적 대상: Precision chamfering, deburring and V-profile machining in aluminum and aluminum alloys, where clean edges and reduced material adhesion are required.

주요 기능

120° V-Profile

Wide-Angle Chamfering

DLC Coating

Low Friction & Adhesion

3-플루트 설계

안정적인 절단

솔리드 카바이드

높은 강성

DLC coated carbide chamfer mill for aluminum machining제품 갤러리

120 degree DLC coated solid carbide chamfer mill for aluminum

120 degree solid carbide V groove chamfer mill cutting profile

 

120 degree carbide chamfer cutter product details

Three flute solid carbide chamfer mill with 120 degree geometry

공구 치수 및 사양

Reference sizes: Ø6–Ø20 mm. The 90° diagram is for reference only; actual tool angle is 120°.

120 degree DLC coated carbide chamfer mill dimensional drawing

D = 절삭 직경 · A = 각도 · L1 = 플루트 길이 · d = 생크 직경 · L = 전체 길이

Standard 120° Chamfer Mill Sizes

Standard dimensional references for the 120° DLC-coated V-groove chamfer mill.

모든 사이즈를 보려면 아래로 스크롤하세요

D(mm) 각도 A L1(mm) d (mm) L (mm)
6 120° 15 6 50
7 120° 16 7 60
8 120° 17 8 60
9 120° 19 9 75
10 120° 20 10 75
11 120° 23 11 75
12 120° 25 12 75
14 120° 30 14 100
16 120° 35 16 100
18 120° 38 18 100
20 120° 40 20 100

All dimensions in mm. Confirm selected sizes and availability before ordering.

Aluminum Chamfering & Tool Selection

  • 120° Geometry: Match the cutting angle and depth to the required chamfer or V-profile.
  • V-Groove Cutting: Confirm tip geometry, groove depth and tool clearance.
  • DLC for Aluminum: Maintain effective chip removal and low tool runout.

120° DLC-Coated Chamfer Mill Customization

사용자 지정 cutting diameters, flute lengths, shank sizes, overall lengths, V-profile geometry, cutting-edge preparation and DLC coating options are available for aluminum machining requirements.

품질, 검사 및 납품

Our 120° DLC-coated carbide chamfer mills undergo precision grinding and inspection of dimensions, cutting edges and coating quality to ensure consistent batch quality.

초경합금 사각 엔드밀의 관리된 제조 공정 및 최종 검사

제품 및 적용 분야 FAQ

Common questions about 120° DLC carbide chamfer mills for aluminum machining.

What is a 120° carbide chamfer mill used for?
다음 용도로 사용됩니다. 120° chamfering, deburring and V-profile machining in aluminum and compatible non-ferrous materials.
What is the difference between 90° and 120° chamfer mills?
A 90° cutter has 45° sides relative to its axis, while a 120° cutter has 60° sides. Choose the included angle that matches the required profile.
Why choose DLC coating for aluminum chamfering?
DLC 코팅 reduces cutting friction and aluminum adhesion, helping limit built-up edge during machining.
What are the benefits of a 3-flute chamfer mill?
그리고 3날 디자인 provides multiple cutting edges for stable engagement and consistent aluminum edge finishing.
Can this 120° chamfer mill cut V-grooves?
It supports matching 120° V-profiles. Full-depth V-groove milling requires confirmation of tip-cutting geometry, groove depth and tool clearance.
Is this DLC chamfer mill suitable for steel or stainless steel?
This configuration is intended mainly for aluminum alloys. For steel or stainless steel, select a more suitable coating and tool geometry.

사이즈, 맞춤 제작 및 OEM 관련 자주 묻는 질문

Ordering information for distributors, importers and OEM customers.

어떤 표준 사이즈가 있나요?
Reference sizes range from Ø6–Ø20 mm, with 15–40 mm flute lengths and 50–100 mm overall lengths. See Specifications & Sizes for exact combinations.
Can custom 120° DLC chamfer mills be manufactured?
네. Custom diameters, flute lengths, shank sizes, overall lengths and cutting-edge geometry can be reviewed against drawings or samples.
Are OEM branding and mixed-size orders available?
네. Private-label packaging, custom marking and mixed-size orders can be arranged according to quantity and specifications.
견적서를 받기 위해서는 어떤 정보가 필요한가요?
다음 정보를 제공해 주십시오. cutting diameter, flute length, shank size, overall length, aluminum grade and quantity. Include drawings for custom chamfers or V-grooves.

기술 자료 다운로드

Product catalogs and reference cutting data.

초경 엔드밀 카탈로그

Chamfer mills and related cutters.

카탈로그 보기

엔드밀 회전 속도 및 이송량 가이드

Starting cutting-data references.

가이드 보기

사이즈, 가격 또는 맞춤 제작 옵션이 필요하신가요?

견적 요청을 위해 사양과 수량을 보내주십시오.

  • 표준 크기
  • 소액 재판 명령
  • 다양한 사이즈
  • OEM 및 맞춤형 제작
QR 코드 보기 – 위챗으로 영업팀에 문의하기
HY 절삭 공구 위챗 QR 코드

위챗으로 문의하시려면 QR 코드를 스캔하세요.

HY 제품 문의

위챗

HY 절삭 공구 위챗 QR 코드

위챗으로 문의하시려면 QR 코드를 스캔하세요.

관련 제품