TiCN-Coated Solid Carbide Centering and Chamfer Mill 60°/90°/120°
- ◆Combines centering, spot drilling and chamfering for efficient hole-preparation operations
- ◆60°, 90° and 120° included-angle options for different chamfer, countersink and V-groove requirements
- ◆Precision-ground solid carbide geometry supports stable cutting and consistent chamfer profiles
- ◆TiCN coating improves wear resistance for steel, alloy steel, stainless steel and cast-iron machining
- ◆Custom diameters, angles, tip geometry, shank sizes and overall lengths available
Materiale di candidatura:
Steel, alloy steel, stainless steel and cast iron.
Selection Note:
Spot drilling and direct plunging require a center-cutting tip configuration. Please provide the required 60°, 90° or 120° included angle, cutting diameter, flute length, shank diameter, overall length, workpiece material and order quantity for quotation.
Qualità costante
Consistent geometry across repeat orders.
Ordini flessibili
Small batches and mixed sizes available.
OEM Support
Custom marking, labels and packaging.
Standard e personalizzati
Standard sizes and custom configurations.
TiCN-Coated Centering and Chamfer Mill Overview
This TiCN-coated solid carbide centering and chamfer mill is designed for accurate hole positioning, spot drilling, edge chamfering, countersinking and V-groove preparation in ferrous materials. Available with 60°, 90° and 120° included-angle configurations, the tool allows the cutting profile to be matched to different hole-preparation and edge-finishing requirements. Precision-ground cutting geometry supports stable engagement and consistent chamfer formation, while the solid carbide substrate provides rigidity for CNC machining. TiCN coating improves wear resistance and helps reduce friction when machining steel, alloy steel, stainless steel and cast iron.
60° / 90° / 120°
Precision Ground
TiCN
Ø3–Ø20 mm
Centering & Chamfering Configuration
Three Included-Angle Options
60°, 90° and 120° configurations allow the cutting profile to be matched to different spotting, chamfering, countersinking and V-groove requirements.
Precision-Ground Cutting Geometry
Precisely ground cutting surfaces support controlled engagement, accurate centering and consistent chamfer profiles across different hole-preparation and edge-finishing operations.
TiCN Wear-Resistant Surface
TiCN coating improves wear resistance and helps reduce friction during repeated machining of steel, stainless steel, alloy steel and cast iron.
Application-Specific Advantages
Flexible Angle Selection
Multiple included-angle options cover different chamfer, spotting, countersink and V-groove geometries.
Controlled Cutting Engagement
Precision-ground geometry supports stable contact and controlled cutting during centering, chamfering and angled-profile machining.
Improved Wear Resistance
TiCN coating supports repeated cutting in ferrous materials where abrasive and adhesive wear can affect tool performance.
Custom Geometry Options
Diameter, included angle, tip profile, shank size and overall length can be reviewed for application-specific and replacement-tool orders.
Recommended Machining Operations
This cutter is intended mainly for centering, spot drilling, hole-edge preparation and angled-profile machining. Direct plunging or spot drilling requires a center-cutting tip geometry, which should be confirmed before ordering.
Centering
RECOMMENDED
Edge Chamfering
RECOMMENDED
Countersinking
RECOMMENDED
V-Groove Milling
SUITABLE
Application Note:
Spot drilling and direct plunging require a center-cutting model. Confirm the tip geometry, required included angle and final chamfer or countersink diameter before ordering.
Workpiece Material Compatibility
| MATERIAL GROUP | CONFIGURATION | APPLICATION LEVEL |
|---|---|---|
| P Steel & Alloy Steel | TiCN-coated carbide configuration for centering, chamfering and countersinking | Primary application |
| M Stainless Steel | TiCN-coated configuration with application-specific cutting conditions | Recommended |
| K Cast Iron | Wear-resistant TiCN-coated carbide configuration | Recommended |
| N Aluminum & Non-Ferrous | Use a separate uncoated, DLC-coated or material-specific low-adhesion configuration | Separate configuration |
Material Note:
The TiCN-coated version is intended mainly for ferrous-material applications. For aluminum and other non-ferrous metals, select a sharper uncoated, DLC-coated or material-specific configuration rather than automatically using the TiCN version.
Product Details & Machining Demonstration
Product views of the solid carbide centering and chamfer mill, including available 60°, 90° and 120° angle configurations, cutting profiles and tool details.
Tool Nomenclature & Dimensions
Reference dimensional nomenclature and standard configurations for the TiCN-coated solid carbide centering and chamfer mill. Available 60°, 90° and 120° included-angle configurations cover different spotting, chamfering, countersinking and V-groove requirements. Confirm the cutting diameter, included angle, flute length, shank diameter, overall length and tip geometry for the selected application. All listed dimensions are in millimeters.
Technical Configuration
| PARAMETER | REFERENCE CONFIGURATION |
|---|---|
| Materiale dell'utensile | Carburo solido |
| Tipo di strumento | Centering & Chamfer Mill |
| Geometria di taglio | Precision-Ground Centering & Chamfer Profile |
| Included Angles | 60° / 90° / 120° |
| Cutting Diameter Range | Ø3–Ø20 mm |
| Flute Length Range | 8–40 mm according to cutting diameter |
| Shank Diameter Range | Ø3–Ø20 mm |
| Lunghezza complessiva | 50 / 60 / 75 / 100 mm reference configurations |
| Rivestimento | TiCN |
| Primary Workpiece Materials | Steel / Alloy Steel / Stainless Steel / Cast Iron |
| Primary Operations | Centering / Spot Drilling / Chamfering / Countersinking / V-Groove Milling |
| Center-Cutting Requirement | Center-cutting tip geometry must be confirmed for direct plunging and spot-drilling applications. |
| Custom Configuration | Cutting diameter, included angle, flute length, shank diameter, overall length, tip geometry and coating can be reviewed according to drawing and application requirements. |
Standard Size Matrix
Reference dimensional series for 60°, 90° and 120° solid carbide centering and chamfer mills. Confirm the required included angle and center-cutting tip configuration according to the actual machining operation.
| CUTTING DIA. D | ANGLE A | FLUTE LENGTH L1 | SHANK DIA. d | OVERALL LENGTH L |
|---|---|---|---|---|
| 3 | 60° / 90° / 120° | 8 | 3 | 50 |
| 4 | 60° / 90° / 120° | 10 | 4 | 50 |
| 5 | 60° / 90° / 120° | 12 | 5 | 50 |
| 6 | 60° / 90° / 120° | 15 | 6 | 50 |
| 7 | 60° / 90° / 120° | 16 | 7 | 60 |
| 8 | 60° / 90° / 120° | 17 | 8 | 60 |
| 9 | 60° / 90° / 120° | 19 | 9 | 75 |
| 10 | 60° / 90° / 120° | 20 | 10 | 75 |
| 11 | 60° / 90° / 120° | 23 | 11 | 75 |
| 12 | 60° / 90° / 120° | 25 | 12 | 75 |
| 14 | 60° / 90° / 120° | 30 | 14 | 100 |
| 16 | 60° / 90° / 120° | 35 | 16 | 100 |
| 18 | 60° / 90° / 120° | 38 | 18 | 100 |
| 20 | 60° / 90° / 120° | 40 | 20 | 100 |
Centering & Chamfering Application Guidance
- Angle Selection: Match the 60°, 90° or 120° included angle to the following drill geometry, countersink specification, chamfer profile or V-groove requirement.
- Center Cutting: Confirm the tip geometry before using the tool for direct plunging or spot drilling. Not every chamfer configuration should automatically be treated as center cutting.
- Chamfer Depth: Control axial depth carefully because the finished chamfer or countersink diameter changes with tool penetration.
- Toolholding: Use a clean, low-runout precision holder to maintain accurate centering, stable cutting and consistent chamfer dimensions.
- Tool Overhang: Use the shortest practical overhang to maintain rigidity, particularly with larger diameters and deeper feature access.
- Material Selection: Use the TiCN-coated configuration mainly for steel, alloy steel, stainless steel and cast iron. For aluminum and other non-ferrous materials, review an uncoated, DLC-coated or material-specific low-adhesion configuration separately.
TiCN-Coated Chamfer Mill Customization
Cutting diameter, included angle, flute length, shank diameter, overall length, tip geometry, cutting-edge preparation and coating can be configured for centering, spot drilling, chamfering, countersinking and V-groove machining. Reference configurations cover Ø3–Ø20 mm cutting diameters with 60°, 90° and 120° included-angle options. Non-standard dimensions and application-specific cutting geometry can be reviewed according to the workpiece material, required chamfer or hole profile, machining depth, tool reach, holder configuration and dimensional requirements.
| PARAMETER | MANUFACTURING CAPABILITIES |
|---|---|
| Diametro di taglio | Reference cutting diameters range from Ø3 to Ø20 mm. Intermediate and non-standard diameters can be reviewed according to the required chamfer, countersink, groove or hole-preparation geometry. |
| Angolo incluso | 60°, 90° and 120° included-angle configurations are available for different centering, spotting, chamfering, countersinking and V-groove requirements. Non-standard angles can be reviewed from drawings where required. |
| Geometria di taglio | Precision-ground cutting geometry can be matched to the required angle, workpiece material, cutting engagement and finished edge profile. Final flute and edge configuration are confirmed according to the selected model and application. |
| Center-Cutting Tip | Center-cutting tip geometry can be reviewed for applications requiring spot drilling or direct axial entry. Please specify whether the tool will be used for centering, plunging or chamfering only. |
| Chamfer & Countersink Profile | Included angle, target chamfer diameter and cutting profile can be matched to the component drawing, countersink specification or required edge-break geometry. |
| V-Groove Geometry | 60°, 90° and 120° profiles can also be reviewed for V-groove machining where the required groove angle and cutting depth are compatible with the tool geometry. |
| Lunghezza della scanalatura | Reference flute lengths range from 8 to 40 mm according to cutting diameter. Non-standard flute lengths can be reviewed where additional reach or a specific feature depth is required. |
| Shank Configuration | Reference shank diameters range from Ø3 to Ø20 mm. Standard or drawing-defined shank sizes and clamping lengths can be reviewed according to holder compatibility and machine setup. |
| Lunghezza complessiva | Reference overall lengths include 50, 60, 75 and 100 mm. Custom overall length can be reviewed where additional reach, fixture clearance or holder access is required. |
| Cutting-Edge Preparation | Rake geometry, relief, edge preparation and flute finishing can be reviewed according to the workpiece material, chamfer width, cutting load and required edge quality. |
| TiCN Coating | TiCN coating can be selected for ferrous-material applications where improved wear resistance and reduced friction are required during repeated centering, chamfering and countersinking operations. |
| Materiale del pezzo da lavorare | The TiCN-coated configuration is intended mainly for steel, alloy steel, stainless steel and cast iron. For aluminum and other non-ferrous materials, uncoated, DLC-coated or other material-specific configurations can be reviewed separately. |
| Machining Application | Geometry can be reviewed for centering, spot drilling, edge chamfering, countersinking, hole-edge preparation and V-groove machining on CNC machining centers and milling machines. |
| Dimensional Requirements | Drawing-defined requirements can be reviewed for cutting diameter, included angle, flute length, shank diameter, overall length, tip geometry, chamfer profile and tool runout. |
Servizi OEM e a marchio privato
OEM manufacturing and private-label supply options are available for industrial distributors, tooling brands and repeat-production customers. Laser identification, label content, protective packaging and coating presentation can be configured according to the approved product specification and order requirements.
Laser Etching
Custom logos, tool codes, cutting dimensions, coating identification and batch numbers can be marked according to the available shank area.
Custom Labels & Packaging
Individual protective tubes, product labels, specification details, colored packaging tubes and private-label packaging can be reviewed.
Commercial Terms
MOQ, sample evaluation, custom-size trials, repeat orders and scheduled supply programs are confirmed according to the selected configuration.
Technical Workflow
A structured review process is used to confirm standard, customized and private-label square end mill requirements before production.
Inquiry
Submit the material, hardness, milling operation, dimensions, tolerance and quantity.
Engineering
Review flute geometry, helix angle, edge preparation, coating, ap and ae.
Commercial
Confirm quotation, MOQ, sample requirements, production schedule and delivery terms.
Production
CNC grinding, end-face formation, edge preparation, coating and laser marking.
Quality Control
Inspect diameter, flute length, shank, runout, square-end geometry and cutting edges.
Quality, Inspection & Delivery
Our solid carbide square end mills are controlled through material verification, precision grinding, in-process measurement and final inspection. Key dimensions, square-end geometry, cutting-edge condition, coating appearance and product identification are reviewed according to the approved specification or drawing before packing.
Three-Stage Quality Control
Inspection checkpoints are arranged around the manufacturing process to support dimensional consistency and repeat-order control.
Incoming Material Control
Carbide substrate grade, blank dimensions and supplied material information are checked against the production requirement.
In-Process Grinding Control
Cutting diameter, flute geometry, flute length, square-end profile and shank dimensions are monitored during CNC grinding.
Final Tool Inspection
Finished tools are reviewed for specified dimensions, runout, cutting-edge condition, coating appearance, marking and packing identification.
Key Inspection Characteristics
Inspection requirements are confirmed according to the standard product specification or the approved custom drawing.
| INSPECTION ITEM | CONTROL FOCUS | CONFIRMATION BASIS |
|---|---|---|
| Cutting Diameter (DC) | Diameter and dimensional consistency | Standard specification or approved drawing |
| Flute Length (APMX) | Effective cutting length | Confirmed product size or drawing requirement |
| Shank Diameter (DCON) | Clamping-section dimension and surface condition | Applicable shank specification |
| Overall Length (OAL) | Total tool length | Standard size matrix or approved drawing |
| Radial Runout | Concentricity between cutting section and shank | Agreed inspection requirement |
| Square-End Geometry | End-face profile, corner condition and center-cutting form | Selected tool configuration |
| Flute & Helix Profile | Flute count, helix form and grinding consistency | Approved manufacturing configuration |
| Cutting Edge & Coating | Edge condition, visible defects and coating appearance | Application-specific production requirement |
| Marking & Identification | Tool code, dimensions and batch information where applicable | Confirmed order and packaging specification |
Measurement & Batch Traceability
Optical measuring systems, tool inspection equipment and appropriate dimensional gauges are selected according to the feature being checked.
Optical Measurement
Profile and dimensional review of specified cutting features.
Runout Verification
Concentricity review based on the agreed product requirement.
Edge Inspection
Magnified review of the end face, corners and cutting-edge condition.
Batch Identification
Order, product and batch information are linked where required for repeat supply.
Protective Packaging Process
Finished end mills are protected to reduce contact between cutting edges and to support clear product identification during storage and transportation.
Bulk-Order & Export Packaging
Bulk shipments can be arranged with reinforced cartons, protective wrapping, palletized loading or export cases according to order quantity, shipment weight and agreed transportation requirements.
Delivery Coordination
Production completion, packing method and dispatch arrangements are confirmed according to the approved order. Courier, air, sea or customer-designated shipping options can be reviewed according to shipment size and destination. Final lead time is confirmed after product specifications, quantity and packaging requirements are approved.
Product & Application FAQs
Answers to common questions about selecting and applying the TiCN-Coated Solid Carbide Centering and Chamfer Mill in 60°, 90° and 120° configurations for centering, spot drilling, chamfering, countersinking and V-groove machining.
What operations is this centering and chamfer mill designed for?
How should I choose between 60°, 90° and 120°?
Can this tool be used for spot drilling?
What is the advantage of the precision-ground cutting geometry?
What is the benefit of TiCN coating?
Is the TiCN-coated version recommended for aluminum?
Ordering & Customization FAQs
Information for distributors, tooling suppliers and industrial customers requesting standard or customized solid carbide centering and chamfer mill configurations.
What standard sizes are available?
Can non-standard angles or dimensions be customized?
Can the tip geometry be customized for center cutting?
Are OEM marking and private-label packaging available?
Qual è il tempo di consegna standard?
What information is required for an accurate quotation?
Technical Downloads
Use the following references for solid carbide cutter selection and starting machining-data review.
Solid Carbide End Mill Catalog
Review related chamfer mills, centering tools, square-end, ball-nose and application-specific solid carbide cutter series.
End Mill Speeds & Feeds Guide
Access reference starting parameters for application review and controlled machining trials.
Need Sizes, Pricing or Custom Options?
Send us the required tool type, sizes, quantities, workpiece material and any OEM or custom requirements. We will confirm suitable specifications, availability, lead time and quotation details.
Drawings, size lists and reference photos are welcome.
