Mũi khoan bậc đáy phẳng hợp kim nguyên khối phủ DLC cho nhôm

DLC FLAT-BOTTOM CARBIDE STEP DRILL FOR ALUMINUM

This DLC-coated 2-flute carbide step drill is designed for flat-bottom counterbores and recessed fastener seats in aluminum.

Chất nền:Cacbua rắn hạt mịn
Lớp phủ:DLC Coating
Loại mũi khoan:Flat-Bottom Step Drill
Cutting Form:Two-Diameter Flat Step
Số lượng sáo:2 sáo
Chất làm mát:Air / Mist / External Coolant
Listed Cutting SizesØ4.1 / 4.2 / 4.5 / 5.0 mm
Tool Dimensions:Ø8 Shank × 80 mm OAL
Ứng dụng / Vật liệu
N AluminumN Copper — On ReviewO Plastics — On Review
TỐT NHẤT DÀNH CHO

DLC Coating

Low Adhesion

Flat-Bottom Step

Flat Seats

2 sáo

Quá trình di tản chip

Hình học tùy chỉnh

OEM Options

DLC Flat-Bottom Carbide Step Drill for Aluminum

Điều này DLC-coated solid carbide flat-bottom step drill combines two cutting diameters for aluminum counterbores and recessed fastener seats. Its low-friction DLC coating helps reduce aluminum adhesion and built-up edge.

Cái 2-flute design provides chip space, while the flat-bottom step geometry supports stepped-hole machining with fewer tool changes.

Lớp phủDLC
Sáo2 sáo
Hình học cắtFlat-Bottom Step
Primary MaterialAluminum Alloys

DLC-Coated 2-Flute Flat-Bottom Step Drill

Key Features for Aluminum Step Drilling

DLC Anti-Adhesion

Low-friction coating helps reduce aluminum sticking and built-up edge.

Flat-Bottom Counterbore

Stepped cutting geometry forms a flat shoulder for recessed fastener seats.

2-Flute Chip Evacuation

Two flutes provide chip space for aluminum step drilling.

Aluminum Counterboring Applications & Materials

Designed for flat-bottom stepped holes and counterbores in aluminum components, including recessed screw seats and mounting features.

DLC flat-bottom step drill application materials and cutting-tool features for aluminum machining

Click image to view full size

Phù hợp nhất cho

  • Flat-bottom counterbores in aluminum plates
  • Recessed fastener seats in aluminum profiles
  • Pilot holes combined with larger stepped diameters
  • Drawing-based aluminum step-hole geometries

Material Compatibility

Primary:
Aluminum alloys (ISO N).

On Review:
Selected copper alloys, acrylic and engineering plastics, subject to geometry and cutting conditions.

Selection Note:
Confirm the pilot diameter, counterbore diameter, flat shoulder profile and required step depth. This DLC configuration is not intended as a general-purpose steel drill.

DLC Flat-Bottom Step Drill Specifications

2-flute solid carbide step drill with DLC coating for aluminum counterboring and flat-bottom fastener seats.

Step Drill Dimensions

DLC carbide flat-bottom step drill dimension reference

d1 Pilot Diameter  · d2 Step Diameter  · l Cutting Length  · d Shank Diameter  · L Chiều dài tổng thể

DLC Aluminum Step Drill Reference Sizes

Listed configurations with Ø8 mm shank and 80 mm overall length. All dimensions are in millimeters.

Mẫu Listed D (mm) Length l (mm) Chiều dài thân (mm) OAL L (mm)
4.1 × 6 × D8 × 80L 4.1 6 8 80
4.2 × 5 × D8 × 80L 4.2 5 8 80
4.5 × 5 × D8 × 80L 4.5 5 8 80
5.0 × 5 × D8 × 80L 5.0 5 8 80

Ghi chú về kích thước: The chart does not define the complete two-diameter step geometry. Confirm d1, d2, flat shoulder profile, step depth and tolerances before ordering.

Bạn cần biết thông tin về kích cỡ, giá cả hoặc các tùy chọn đặt hàng theo yêu cầu?

Send your step-hole drawing, aluminum grade and quantity for quotation. Yêu cầu báo giá OEM

DLC Flat-Bottom Step Drill Customization

Tùy chỉnh DLC-coated carbide step drills for aluminum counterboring, with adjustable pilot diameters, step geometry, cutting lengths and flat-bottom profiles.

Custom DLC carbide step drill geometry and flat-bottom shoulder design

Flat-Bottom Step Geometry

Custom pilot and step diameters, flat shoulders, corner forms and edge preparation for aluminum machining.

Custom aluminum flat-bottom step drill dimensions and reach options

Dimensions & Reach

Custom step depths, flute lengths, overall lengths, shank sizes and drawing-defined tolerances.

Custom Requirements: Provide d1/d2 diameters, step depth, flat shoulder profile, tolerances, aluminum grade and quantity. DLC coating and final geometry are confirmed after technical review.

OEM & Private-Label Step Drills

Custom manufacturing and private-label supply for cutting-tool distributors and aluminum-machining customers.

OEM laser marking and private-label packaging for DLC carbide step drills

Khắc laser

Custom logos, model codes and size identification.

Bao bì mang nhãn hiệu riêng

Protective tubes, branded labels and custom boxes.

Đơn hàng dùng thử và đơn hàng đặt lại

Small-batch trials and repeat supply by configuration.

DLC Step Drill Quality Inspection

Inspection focuses on step dimensions, flat-bottom geometry, cutting edges and DLC coating for aluminum counterboring applications.

DLC carbide step drill inspection and quality control

Step Geometry

Pilot and step diameters, shoulder profile and step depth.

Cutting Edges

Edge condition, grinding finish and runout.

DLC Coating

Coating appearance, surface consistency and visible defects.

Inspection criteria and tolerances follow the confirmed specification or approved drawing.

Xem sản xuất & Kiểm soát chất lượng

Bao bì bảo vệ

Individual protection, batch identification and export packing help protect precision-ground cutting edges during shipment.

Individual protective tubes for DLC carbide step drills

Bảo vệ cá nhân

Specification labeling and batch identification for carbide drills

Nhận dạng lô hàng

Protective export packaging for solid carbide step drills

Export Packaging

Custom labels and private-label packaging are available for OEM orders.

Thời gian giao hàng & Vận chuyển

Lead Time: Confirmed according to specifications, DLC coating, quantity and production schedule.

Shipping: Express courier, air freight, sea freight or customer-nominated forwarder.

Xem các tài nguyên dành cho người mua và nhà phân phối
HY Cutting Tools international shipping and payment options

DLC Flat-Bottom Step Drill FAQs

Technical answers about DLC-coated step drilling, aluminum counterbores, flat-bottom geometry and tool selection.

What is a DLC flat-bottom step drill used for?

Điều này DLC-coated carbide step drill combines two cutting diameters for aluminum stepped holes, flat-bottom counterbores and recessed fastener seats.

Why choose DLC coating for aluminum step drilling?

The low-friction Lớp phủ DLC helps reduce aluminum adhesion, built-up edge and chip welding, supporting smoother cutting under suitable conditions.

How is a flat-bottom step drill different from a standard step drill?

Its flat-bottom step geometry is intended to form a flat counterbore shoulder or fastener seating surface. The exact bottom and corner profile depends on the selected tool design.

What standard sizes are available for this DLC step drill?

Listed configurations have Ø4.1–Ø5.0 mm cutting diameters, Ø8 mm shanks and 80 mm overall lengths. Confirm both step diameters, step depth and shoulder profile before ordering.

Can this DLC step drill machine copper, plastics or steel?

Aluminum alloys are the primary application. Selected copper alloys and plastics require application review. This DLC configuration is not positioned as a general-purpose steel drill.

What coolant method is recommended for aluminum step drilling?

Air blast, mist or suitable external coolant can support chip evacuation. Select the method according to the aluminum grade, step depth and machine setup.

Custom DLC Step Drill & OEM FAQs

Ordering information for custom dimensions, trial quantities, private labeling and repeat supply.

Can you manufacture custom DLC flat-bottom step drills?

Yes. Custom pilot diameters, larger step diameters, step depths, shoulder forms, tool lengths and shank sizes can be reviewed against your drawing.

What information is needed for a custom step drill quotation?

Provide d1/d2 diameters, step depth, shoulder profile, tolerances, aluminum grade and quantity. A dimensioned hole drawing is recommended.

Do you accept small trial orders?

Yes. Small-batch trials are supported for checking step dimensions, aluminum machining performance and application suitability before larger orders.

Are OEM marking, packaging and repeat orders available?

Yes. Custom logos, tool codes, private-label packaging and repeat supply are supported according to confirmed specifications and order requirements.

Bạn cần biết thông tin về kích cỡ, giá cả hoặc các tùy chọn đặt hàng theo yêu cầu?

Vui lòng gửi thông số kỹ thuật và số lượng để nhận báo giá.

  • Kích thước tiêu chuẩn
  • Các lệnh xét xử sơ thẩm nhỏ
  • Các kích cỡ khác nhau
  • OEM & Dụng cụ theo yêu cầu
Xem mã QR – Liên hệ bộ phận bán hàng qua WeChat
Mã QR WeChat của HY Cutting Tools

Quét mã để liên hệ với chúng tôi trên WeChat.

Yêu cầu thông tin về sản phẩm HY

WeChat

Mã QR WeChat của HY Cutting Tools

Quét mã để liên hệ với chúng tôi trên WeChat.