Mảnh dao phay hợp kim hai mặt LNMU/ENMU/BLMP cho phay bước tiến cao

LNMU, ENMU and BLMP carbide inserts support high-feed roughing with shallow cuts and increased table feed. Select the matching cutter body and coated grade for face milling and cavity roughing in steel, stainless steel or cast iron.

◆High-Feed Roughing
◆Double-Sided Options
◆Three Insert Series
◆Bao bì OEM
Series: LNMU / ENMU / BLMP · Each requires a matching cutter pocket
Ứng dụng: High-feed face milling / Cavity roughing
Materials & Grade: Steel / Stainless Steel / Cast Iron · Select grade by material and cutting conditions
Cung ứng và đóng gói: Mixed series by confirmation · Neutral / Private-label packaging
TỐT NHẤT DÀNH CHO

High-Feed Roughing

Double-Sided Design

Three Insert Series

Bao bì OEM

◆Tổng quan về sản phẩm

LNMU0303, ENMU0603ER and BLMP0904R are three insert families offered on this page for double-sided, indexable high-feed milling. They are intended for productive roughing with a compatible high-feed cutter, where a small entering angle permits a relatively high feed per tooth at a controlled axial depth of cut. Each family requires its own matching cutter pocket and application data.

Choose the complete insert code by workpiece material, cutter body, geometry, carbide grade and coating. The supplied description mentions micro-grain carbide and PVD coating, but does not identify a grade or coating for every model. The number of usable edges and the allowable tool path must also be confirmed for the selected insert and cutter.

◆Cấu hình chính

Three Insert Families

LNMU0303, ENMU0603ER and BLMP0904R are distinct designations. Match the complete insert model to the approved cutter-body code and pocket drawing.

High-Feed Geometry

The selected insert and cutter control chip thinning, allowable axial depth and effective cutting diameter. Apply feed recommendations for the actual cutter assembly.

Grade & Edge Count

Confirm the specified carbide grade, coating, chipbreaker and usable edges per insert. These values cannot be established from the three family names alone.

◆Applications & Selection

High-feed face milling and cavity roughing are application starting points. Steel (ISO P), stainless steel (ISO M), cast iron (ISO K), tool steel or harder materials require the corresponding supplier-approved grade and cutting data. Ramping, helical entry, plunging and full-width slotting depend on the particular cutter body’s published limits.

Selection note: Provide the cutter-body model, workpiece grade and hardness, operation, axial and radial engagement, coolant method and target finish. Confirm the complete insert designation before setting feed per tooth or ordering a replacement.

◆Hình ảnh sản phẩm

 

LNMU ENMU BLMP high-feed milling insert product image 1
LNMU ENMU BLMP high-feed milling insert product image 2
LNMU ENMU BLMP high-feed milling insert product image 3
LNMU ENMU BLMP high-feed milling insert product image 4
LNMU ENMU BLMP high-feed milling insert product image 5
LNMU ENMU BLMP high-feed milling insert product image 6

◆Machining Video

The video demonstrates machining. Confirm the insert code, cutter, workpiece and cutting parameters separately for your application.

◆Specifications & Series

This page groups three named high-feed milling insert families. The supplied product copy does not include a dimensioned manufacturer drawing, exact carbide grades or coating codes. The model numbers below identify inquiry options; obtain the matching insert and cutter-body drawings before treating a dimension or fit as approved.

Series Named Use on This Page Details Required for Selection
LNMU0303 Double-sided high-feed milling series Complete suffix, measured dimensions, edge count, grade and matching cutter body.
ENMU0603ER Double-sided high-feed milling series Complete suffix, measured dimensions, edge count, grade and matching cutter body.
BLMP0904R High-feed milling series named in the supplied description Confirm double-sided configuration, usable edges, drawing, grade and matching cutter body.
Dimensional note: Do not infer millimeter dimensions, edge count or interchangeability from 0303, 0603 or 0904 alone. These families can use different seating and clamping designs. Confirm the exact supplier drawing and cutter body's approved insert list.

◆Configuration to Confirm

Mặt hàng Specification Check
Insert material Carbide; request the specific substrate grade and application range for each ordered model.
Coating & geometry Confirm coating system, chipbreaker, edge preparation and all usable cutting edges by full item code.
Size & clamping Compare the insert drawing with cutter pocket, screw, seat and specified tightening torque.
Chi tiết gia công Specify steel (ISO P), stainless steel (ISO M), cast iron (ISO K) or another material by exact grade and hardness; verify grade-specific suitability.
Hoạt động Face or cavity roughing as applicable. Check axial depth, radial engagement, ramp angle, helical entry, plunge and slotting limits with the chosen cutter.

◆Cách chọn miếng lót

1. Identify the cutterProvide cutter-body code, diameter, tooth count, pocket and screw details.
2. Match the familyCheck LNMU, ENMU or BLMP against the cutter's approved insert list.
3. Select the gradeUse the workpiece grade, hardness, coolant and stability to qualify coating and edge geometry.
4. Confirm the cutApply cutter-specific depth, feed and entry limits; validate chips, wear and vibration.

◆Dữ liệu bắt đầu cắt

High-feed milling generally combines a relatively shallow axial depth (ap) with a feed per tooth (fz) appropriate to the selected cutter geometry. Obtain the manufacturer's recommended cutting speed (Vc), fz, ap, radial width (ae) and entry limits for the complete insert grade and cutter. The supplied product copy does not establish numerical ranges.

Calculation reference: n = (1000 × Vc) / (π × Dc); Vf = n × z × fz. Here n is RPM, Dc the applicable cutter diameter in mm, Vf the programmed feed in mm/min, z the number of engaged cutting teeth and fz the recommended feed per tooth in mm. Confirm effective diameter and chip-thinning guidance for the cutter geometry.

◆Related Guide & Ordering

Hãy sử dụng dịch vụ của chúng tôi Hướng dẫn về các loại miếng chèn cacbua for a general family overview. Send the full insert and cutter-body codes to request the corresponding drawing, grade options and application data.

◆Tùy chỉnh miếng chèn cacbua & OEM

Hãy chỉ định loại lưỡi dao phù hợp với quy trình gia công, phôi và giá kẹp. Chúng tôi có thể xem xét các lựa chọn thay thế tiêu chuẩn, hình dạng lưỡi dao dành riêng cho ứng dụng cụ thể cũng như các yêu cầu về nhãn hiệu riêng dựa trên mã định danh lưỡi dao, bản vẽ hoặc mẫu của quý khách. Các loại vật liệu, lớp phủ, kích thước và số lượng đặt hàng có sẵn sẽ được xác nhận cho từng dòng sản phẩm được yêu cầu.

Hình học và kiểm soát chip

Kiểm tra bộ phá phoi, góc nghiêng, cách chuẩn bị mép cắt, bán kính đầu mũi và thiết kế góc cho quy trình gia công và chi tiết gia công. Xác nhận tính tương thích của giá đỡ trước khi phê duyệt hình học đã được điều chỉnh.

Chất nền và lớp phủ

Chọn loại hợp kim cacbua và lớp phủ phù hợp với vật liệu phôi, điều kiện gia công cũng như sự cân bằng mong muốn giữa khả năng chống mài mòn và độ dẻo dai của mép cắt.

Kích thước & OEM

Kiểm tra kích thước, độ dày, các đặc tính định vị và kẹp, dung sai, khắc laser và bao bì mang nhãn hiệu riêng so với thông số kỹ thuật đã được phê duyệt.

◆Các tùy chọn tùy chỉnh

Vui lòng điền vào các trường dưới đây khi gửi yêu cầu. Các tùy chọn cụ thể tùy thuộc vào dòng sản phẩm và sẽ được xác nhận trong báo giá hoặc bản vẽ đã được phê duyệt.

Thông số kỹ thuật Các chi tiết cần xác nhận
Loại chèn Miếng dao dùng cho các công đoạn tiện, phay, tạo ren, tạo rãnh hoặc khoan; vui lòng gửi mã sản phẩm hoặc bản vẽ.
Kích thước & Cách chọn size Hình dạng, kích thước, độ dày, đường kính vòng tròn nội tiếp hoặc chiều dài cạnh, hình dạng lỗ hoặc hình dạng kẹp, và mẫu giá đỡ.
Hình học cắt Bộ phá phoi, bán kính đầu mũi hoặc góc, xử lý mép cắt, hướng cắt và hình dạng phù hợp với ứng dụng cụ thể.
Loại & Lớp phủ Nhóm và cấp độ phôi, nền cacbua, hệ thống lớp phủ và điều kiện gia công ướt hoặc khô.
Dung sai và kiểm tra Các kích thước quan trọng, yêu cầu về hình dạng, phương pháp kiểm tra và bất kỳ báo cáo nào cần thiết.
Bài thuyết trình về OEM Ghi chú trên nhãn hoặc trên hộp, nội dung nhãn, dạng bao bì và số lượng trong mỗi gói.

◆Cách yêu cầu một miếng lót tùy chỉnh

Hình ảnh dòng sản phẩm miếng dao cắt cacbua của HY Cutting Tools
01 · Chia sẻ tài liệu tham khảoVui lòng gửi thông tin chỉ định, bản vẽ, ảnh mẫu và mẫu giá đỡ.
02 · Mô tả kiểu cắtHãy nêu rõ chi tiết gia công, công đoạn gia công, điều kiện cắt và vấn đề hiện tại.
03 · Xác nhận đề xuấtXem xét các thông số về hình học, cấp độ, lớp phủ, dung sai, số lượng và kế hoạch lấy mẫu.
04 · Phê duyệt Quyết địnhPhê duyệt bản vẽ cuối cùng, các ký hiệu, điều kiện đóng gói và giao hàng.
Ghi chú về thông số kỹ thuật: Việc có cùng mã định danh ISO không tự động đồng nghĩa với việc có cùng loại dụng cụ phá phoi, loại hợp kim cacbua, lớp phủ hoặc hiệu suất cắt. Hãy xác nhận cấu hình đầy đủ trước khi đặt hàng sản phẩm thay thế.

Vui lòng gửi yêu cầu về tờ rơi của quý vị qua biểu mẫu liên hệ hoặc xem lại Dịch vụ OEM và nhãn hiệu riêng.

◆Kiểm soát chất lượng miếng chèn cacbua

kiểm soát chất lượng các miếng dao cắt cacbua của công ty Hy Cutting Tools

Chất lượng miếng lót phụ thuộc vào cấp độ được phê duyệt, hình dạng, lớp phủ và thông số kỹ thuật kích thước. Chúng tôi sẽ rà soát các yêu cầu tại thời điểm xác nhận đơn hàng và điều chỉnh phạm vi kiểm tra sao cho phù hợp với dòng sản phẩm miếng lót cũng như bất kỳ bản vẽ nào của khách hàng. Vui lòng cung cấp các kích thước quan trọng hoặc yêu cầu về tài liệu trước khi sản xuất để chúng có thể được đưa vào kế hoạch kiểm tra đã thỏa thuận.

01 · Nguyên liệu nhập kho

Kiểm tra xem loại cacbua hoặc tài liệu về vật liệu đã chỉ định có phù hợp với các yêu cầu trong đơn đặt hàng hay không.

02 · Kiểm tra trong quá trình sản xuất

Kiểm tra các kích thước và tính năng tiên tiến trong quá trình sản xuất để đảm bảo tuân thủ theo thông số kỹ thuật đã được phê duyệt.

03 · Kiểm tra cuối cùng

Kiểm tra kích thước đã thỏa thuận, hình thức bên ngoài, tình trạng mép, loại lớp phủ và các ký hiệu (nếu có).

04 · Kiểm tra việc đóng gói

Kiểm tra mã hàng, số lượng, nhãn mác và bao bì bảo vệ để đảm bảo chúng phù hợp với đơn đặt hàng đã được phê duyệt.

◆Kiểm tra và Lập hồ sơ

Cần thống nhất các điểm kiểm tra và tiêu chí nghiệm thu đối với lô hàng đã đặt. Đối với các chi tiết lắp ghép theo yêu cầu, bản vẽ đã được phê duyệt có giá trị ưu tiên hơn so với mô tả chung trong catalogue.

Kiểm tra khu vực Những điều cần xác nhận
Kích thước & Cách mặc Nhập kích thước, độ dày, bán kính góc, các đặc điểm kẹp và mọi dung sai trên bản vẽ.
Hình học cắt Bộ phá phoi, xử lý cạnh, các góc có thể sử dụng và hình dạng (nếu có).
Loại & Lớp phủ Loại và ký hiệu lớp phủ đã được phê duyệt; bất kỳ phương pháp xác minh nào được yêu cầu.
Hình thức & Đóng gói Các hư hỏng bên ngoài có thể nhìn thấy, dấu hiệu nhận biết, mã sản phẩm, số lượng và hình thức đóng gói.
Các hồ sơ được yêu cầu Báo cáo kiểm tra, tài liệu về vật liệu hoặc lớp phủ, giấy chấp thuận mẫu hoặc thông tin nhận dạng lô hàng (nếu đã thỏa thuận).
Ghi chú về chất lượng: Phương pháp kiểm tra, mức độ lấy mẫu và hồ sơ tài liệu sẽ khác nhau tùy theo từng sản phẩm và đơn hàng. Nếu một kích thước, tính chất lớp phủ hoặc báo cáo nào đó có tính chất quan trọng, hãy đưa các tiêu chí chấp nhận của chúng vào bản đặc điểm kỹ thuật mua hàng trước khi sản xuất.

◆Đặt hàng & Giao hàng

Bộ sưu tập ảnh về dòng sản phẩm miếng dao cắt cacbua của HY Cutting Tools
Dòng miếng dao cắt cacbua HY Cutting Tools kèm bao bì

Vui lòng cung cấp danh sách chi tiết theo từng dòng về mã sản phẩm và số lượng cho báo giá gồm các kích thước khác nhau. Tình trạng hàng tồn kho, số lượng đặt hàng tối thiểu, yêu cầu về mẫu và thời gian sản xuất đã được xác nhận cho từng loại chất liệu, lớp phủ và cấu hình.

Hàng tồn kho và số lượng đặt hàng tối thiểu (MOQ)Xác nhận theo mã sản phẩm và số lượng yêu cầu.
Mẫu và sự chấp thuậnCần thống nhất về thông số kỹ thuật mẫu và tiêu chí đánh giá trước khi đặt hàng sản xuất theo yêu cầu.
Thời gian thực hiệnXác nhận thời gian giao hàng sau khi các thông số kỹ thuật, số lượng và hình thức đóng gói đã được phê duyệt.
Đóng gói và vận chuyểnThống nhất về nhãn hộp, số lượng trong mỗi gói, phương thức vận chuyển và các giấy tờ cần thiết.

Vui lòng gửi danh sách sản phẩm và các yêu cầu về chất lượng qua biểu mẫu liên hệ để biết thông tin chi tiết về sản phẩm, tình trạng hàng và xác nhận giao hàng.

◆Câu hỏi thường gặp về sản phẩm

What is high-feed milling?

A compatible high-feed cutter uses its entering-angle and insert geometry to produce a relatively thin chip at a shallow axial depth. This can permit a higher feed per tooth than conventional milling under the cutter maker's specified conditions. The allowable depth and feed depend on the complete cutter and insert combination.

Are LNMU0303, ENMU0603ER and BLMP0904R interchangeable?

No interchangeable fit is established by these family names. Match each complete code to the cutter's approved insert list and compare pocket, seat, screw, dimensions and cutting geometry before selecting a replacement.

How many cutting edges does each double-sided insert have?

A double-sided design can offer usable edges on both faces, but the count varies with the insert shape and edge design. Request the drawing and indexing instructions for the selected full model. The supplied description does not verify a common edge count for all three families.

Can these inserts mill steel, stainless steel and cast iron?

Suitability depends on the exact carbide grade, coating and geometry. Provide the workpiece grade and hardness, operation, coolant and expected cut type so an ISO P, M or K application can be checked against the offered variant.

Can I ramp, plunge or slot with this range?

These capabilities differ by cutter body and insert. Check the published maximum ramp angle, helical entry dimensions, allowable axial depth and full-width slotting guidance for your exact tool before programming the path.

Where are the exact dimensions and cutting parameters?

The supplied page content contains model names but no verified dimension drawing or grade-specific speed and feed table. Request the selected insert drawing and cutter-specific Vc, fz, ap and ae recommendations using the full insert and cutter-body codes.

◆Câu hỏi thường gặp về đặt hàng và OEM

What information should I send for a replacement?

Send the original insert's full code and grade, box-label and both-face photos, cutter-body code, workpiece material, cutting conditions, current wear issue and required quantity. An approved sample cut should confirm fit and performance.

Can the three insert families be ordered together?

Provide a line-by-line list with the full model, grade and quantity for each family. Availability, pack count, minimum order quantity and lead time are confirmed by item.

Are coated grades and custom configurations available?

Share the target workpiece, cutter details and requested substrate, coating or edge geometry. Feasibility and the exact approved specification are confirmed in the quotation or drawing.

Can I request OEM marking or packaging?

Send the proposed marking, label artwork, pack format, model list and quantity. Confirm the sample, approved design and delivery terms before production.

◆Hướng dẫn và Tài liệu tham khảo kỹ thuật

Hãy sử dụng dịch vụ của chúng tôi Hướng dẫn lựa chọn miếng chèn CNC và Hướng dẫn về các loại miếng chèn cacbua for initial insert selection.

For a drawing or quotation, send the complete insert and cutter-body codes with your workpiece and operation.

Bạn cần biết thông tin về kích cỡ, giá cả hoặc các tùy chọn đặt hàng theo yêu cầu?

Vui lòng gửi thông số kỹ thuật và số lượng để nhận báo giá.

  • Kích thước tiêu chuẩn
  • Các lệnh xét xử sơ thẩm nhỏ
  • Các kích cỡ khác nhau
  • OEM & Dụng cụ theo yêu cầu
Xem mã QR – Liên hệ bộ phận bán hàng qua WeChat
Mã QR WeChat của HY Cutting Tools

Quét mã để liên hệ với chúng tôi trên WeChat.

Yêu cầu thông tin về sản phẩm HY

WeChat

Mã QR WeChat của HY Cutting Tools

Quét mã để liên hệ với chúng tôi trên WeChat.