LNMU/ENMU/BLMP Çift Yüzlü Yüksek İlerleme Hızlı Karbür Freze Uçları

LNMU, ENMU and BLMP carbide inserts support high-feed roughing with shallow cuts and increased table feed. Select the matching cutter body and coated grade for face milling and cavity roughing in steel, stainless steel or cast iron.

◆High-Feed Roughing
◆Double-Sided Options
◆Three Insert Series
◆OEM Ambalajlama
Seri: LNMU / ENMU / BLMP · Each requires a matching cutter pocket
Uygulamalar: High-feed face milling / Cavity roughing
Materials & Grade: Steel / Stainless Steel / Cast Iron · Select grade by material and cutting conditions
Tedarik ve Ambalaj: Mixed series by confirmation · Neutral / Private-label packaging
EN İYİ İÇİN

High-Feed Roughing

Çift Taraflı Tasarım

Three Insert Series

OEM Ambalajlama

◆Ürüne Genel Bakış

LNMU0303, ENMU0603ER and BLMP0904R are three insert families offered on this page for double-sided, indexable high-feed milling. They are intended for productive roughing with a compatible high-feed cutter, where a small entering angle permits a relatively high feed per tooth at a controlled axial depth of cut. Each family requires its own matching cutter pocket and application data.

Choose the complete insert code by workpiece material, cutter body, geometry, carbide grade and coating. The supplied description mentions micro-grain carbide and PVD coating, but does not identify a grade or coating for every model. The number of usable edges and the allowable tool path must also be confirmed for the selected insert and cutter.

◆Anahtar Yapılandırması

Three Insert Families

LNMU0303, ENMU0603ER and BLMP0904R are distinct designations. Match the complete insert model to the approved cutter-body code and pocket drawing.

High-Feed Geometry

The selected insert and cutter control chip thinning, allowable axial depth and effective cutting diameter. Apply feed recommendations for the actual cutter assembly.

Grade & Edge Count

Confirm the specified carbide grade, coating, chipbreaker and usable edges per insert. These values cannot be established from the three family names alone.

◆Başvurular ve Seçim Süreci

High-feed face milling and cavity roughing are application starting points. Steel (ISO P), stainless steel (ISO M), cast iron (ISO K), tool steel or harder materials require the corresponding supplier-approved grade and cutting data. Ramping, helical entry, plunging and full-width slotting depend on the particular cutter body’s published limits.

Selection note: Provide the cutter-body model, workpiece grade and hardness, operation, axial and radial engagement, coolant method and target finish. Confirm the complete insert designation before setting feed per tooth or ordering a replacement.

◆Ürün Resimleri

 

LNMU ENMU BLMP high-feed milling insert product image 1
LNMU ENMU BLMP high-feed milling insert product image 2
LNMU ENMU BLMP high-feed milling insert product image 3
LNMU ENMU BLMP high-feed milling insert product image 4
LNMU ENMU BLMP high-feed milling insert product image 5
LNMU ENMU BLMP high-feed milling insert product image 6

◆İşleme Videosu

The video demonstrates machining. Confirm the insert code, cutter, workpiece and cutting parameters separately for your application.

◆Teknik Özellikler ve Seriler

This page groups three named high-feed milling insert families. The supplied product copy does not include a dimensioned manufacturer drawing, exact carbide grades or coating codes. The model numbers below identify inquiry options; obtain the matching insert and cutter-body drawings before treating a dimension or fit as approved.

Series Named Use on This Page Details Required for Selection
LNMU0303 Double-sided high-feed milling series Complete suffix, measured dimensions, edge count, grade and matching cutter body.
ENMU0603ER Double-sided high-feed milling series Complete suffix, measured dimensions, edge count, grade and matching cutter body.
BLMP0904R High-feed milling series named in the supplied description Confirm double-sided configuration, usable edges, drawing, grade and matching cutter body.
Dimensional note: Do not infer millimeter dimensions, edge count or interchangeability from 0303, 0603 or 0904 alone. These families can use different seating and clamping designs. Confirm the exact supplier drawing and cutter body's approved insert list.

◆Onaylanacak Yapılandırma

Öğe Specification Check
Insert material Carbide; request the specific substrate grade and application range for each ordered model.
Coating & geometry Confirm coating system, chipbreaker, edge preparation and all usable cutting edges by full item code.
Size & clamping Compare the insert drawing with cutter pocket, screw, seat and specified tightening torque.
İş parçası Specify steel (ISO P), stainless steel (ISO M), cast iron (ISO K) or another material by exact grade and hardness; verify grade-specific suitability.
Çalışma Face or cavity roughing as applicable. Check axial depth, radial engagement, ramp angle, helical entry, plunge and slotting limits with the chosen cutter.

◆Ek Parçasını Seçme Yöntemi

1. Kesiciyi belirleyinProvide cutter-body code, diameter, tooth count, pocket and screw details.
2. Match the familyCheck LNMU, ENMU or BLMP against the cutter's approved insert list.
3. Sınıfı seçinUse the workpiece grade, hardness, coolant and stability to qualify coating and edge geometry.
4. Confirm the cutApply cutter-specific depth, feed and entry limits; validate chips, wear and vibration.

◆Kesim Verilerinin Başlangıcı

High-feed milling generally combines a relatively shallow axial depth (ap) with a feed per tooth (fz) appropriate to the selected cutter geometry. Obtain the manufacturer's recommended cutting speed (Vc), fz, ap, radial width (ae) and entry limits for the complete insert grade and cutter. The supplied product copy does not establish numerical ranges.

Hesaplama referansı: n = (1000 × Vc) / (π × Dc); Vf = n × z × fz. Here n is RPM, Dc the applicable cutter diameter in mm, Vf the programmed feed in mm/min, z the number of engaged cutting teeth and fz the recommended feed per tooth in mm. Confirm effective diameter and chip-thinning guidance for the cutter geometry.

◆İlgili Kılavuz ve Sipariş

Şunu kullanın: Karbür Uç Türleri Kılavuzu for a general family overview. Send the full insert and cutter-body codes to request the corresponding drawing, grade options and application data.

◆Karbür Uçların Özelleştirilmesi ve OEM

İşleme işlemi, iş parçası ve tutucu çevresindeki kesici uçları belirtin. Kesici uç tanımınız, çiziminiz veya numuneniz doğrultusunda standart yedek parçaları, uygulamaya özel geometrileri ve özel etiket gereksinimlerini inceleyebiliriz. Talep edilen her seri için mevcut kaliteler, kaplamalar, boyutlar ve sipariş miktarları teyit edilir.

Geometri ve Yonga Kontrolü

İşlem ve iş parçası için talaş kırıcıyı, eğimi, kesici kenar hazırlığını, burun yarıçapını ve köşe tasarımını gözden geçirin. Değiştirilmiş bir geometriyi onaylamadan önce tutucu uyumluluğunu doğrulayın.

Alt Tabaka ve Kaplama

İş parçası malzemesi, kesme koşulları ve istenen aşınma direnci ile kenar tokluğu dengesi göz önünde bulundurularak uygun bir karbür kalitesi ve kaplama seçin.

Boyutlar ve OEM

Ek parçanın boyutunu, kalınlığını, konumlandırma ve sıkıştırma özelliklerini, toleranslarını, lazerle işaretlemeyi ve özel etiketli ambalajı onaylanmış teknik şartnameye göre inceleyin.

◆Özelleştirme Seçenekleri

Bir talep gönderirken aşağıdaki alanları kullanın. Seçeneklerin tam içeriği, parça grubuna göre değişir ve teklifte veya onaylanmış çizimde belirtilir.

Şartname Onaylanması Gereken Ayrıntılar
Ekleme Tipi Tornalama, frezeleme, diş açma, oluk açma veya delme uçları; ürün kodunu veya çizimini gönderin.
Beden ve Kesim Şekil, boyut, kalınlık, iç çember veya kenar uzunluğu, delik veya sıkıştırma şekli ve tutucu modeli.
Kesim Geometrisi Talaş kırıcı, burun veya köşe yarıçapı, kenar hazırlığı, kesme yönü ve uygulamaya özgü profil.
Kalite ve Kaplama İş parçası grubu ve kalitesi, karbür alt tabaka, kaplama sistemi ve ıslak veya kuru kesme koşulları.
Tolerans ve Kontrol Kritik boyutlar, profil gereklilikleri, denetim yöntemi ve gerekli raporlar.
OEM Sunumu Üzerine yazılan veya kutu üzerindeki işaretleme, etiket içeriği, ambalaj biçimi ve paket başına miktar.

◆Özel Ek Talep Etme Yöntemi

HY Kesici Aletler Karbür Uçlar serisi fotoğrafı
01 · Kaynağı PaylaşBir tanım, çizim, örnek fotoğraflar ve tutucu modelini gönderin.
02 · Kesimi Açıklayınİş parçasını, işlemi, kesme koşullarını ve mevcut sorunu belirtin.
03 · Teklifi OnaylayınGeometri, eğim, kaplama, tolerans, miktar ve numune planını gözden geçirin.
04 · Kararı OnaylamakNihai çizim, etiketleme, paketleme ve teslimat koşullarını onaylayın.
Teknik Özellik Notu: Uyumlu bir ISO kodu, tek başına aynı talaş kırıcı, karbür kalitesi, kaplama veya kesme performansını garanti etmez. Yedek parça siparişi vermeden önce konfigürasyonun tamamını teyit ediniz.

Eklenti taleplerinizi şu adres üzerinden gönderin: iletişim formu ya da şunu inceleyin: OEM ve özel markalı hizmet.

◆Karbür Uç Kalite Kontrolü

kalite kontrolü karbür uçlar ve kesici aletler

Kesici uç kalitesi, onaylanan kalite sınıfına, geometriye, kaplamaya ve boyutsal özelliklere bağlıdır. Sipariş onayı aşamasında gereksinimleri gözden geçirir ve denetim kapsamını kesici uç serisi ile müşterinin çizimlerine göre uyumlu hale getiririz. Üretimden önce kritik boyutları veya gerekli belgeleri bizimle paylaşın; böylece bunlar üzerinde anlaşmaya varılan denetim planına dahil edilebilir.

01 · Gelen Malzeme

Belirtilen karbür kalitesini veya malzeme belgelerini sipariş şartlarıyla karşılaştırarak doğrulayın.

02 · Üretim Sırasında Yapılan Kontroller

Üretim sırasında boyutları ve en son teknoloji özellikleri, onaylanmış teknik şartnameyle karşılaştırarak kontrol edin.

03 · Son Kontrol

Kararlaştırılan boyutları, görünümü, kenar durumunu, kaplama tanımını ve varsa işaretlemeleri kontrol edin.

04 · Ambalaj İncelemesi

Ürün kodunu, miktarı, etiketleri ve koruyucu ambalajı onaylanmış siparişle karşılaştırarak kontrol edin.

◆Denetim ve Belgeleme

Sipariş edilen seri için denetim noktaları ve kabul kriterleri üzerinde mutabık kalınmalıdır. Özel ek parçalar söz konusu olduğunda, onaylanmış çizim, genel katalog açıklamasına göre önceliklidir.

Alanı Kontrol Et Neleri Doğrulamak Gerekir?
Boyutlar ve Kesim Boyut, kalınlık, köşe yarıçapı, sıkıştırma özellikleri ve çizim toleranslarını girin.
Kesim Geometrisi Talaş kırıcı, kenar hazırlığı, kullanılabilir köşeler ve uygun olduğu durumlarda profil.
Kalite ve Kaplama Onaylanmış kalite sınıfı ve kaplama tanımı; talep edilen herhangi bir doğrulama yöntemi.
Görünüm ve Ambalaj Gözle görülür kenar hasarları, işaretler, ürün kodu, adet sayısı ve paketleme biçimi.
Talep Edilen Kayıtlar Denetim raporu, malzeme veya kaplama belgeleri, numune onayı veya kararlaştırıldığı durumlarda parti tanımlaması.
Kalite Notu: Denetim yöntemi, numune alma düzeyi ve belgeleme, ürüne ve siparişe göre değişiklik gösterir. Bir boyut, kaplama özelliği veya rapor kritik öneme sahipse, üretimden önce kabul kriterlerini satın alma şartnamesine dahil edin.

◆Sipariş ve Teslimat

HY Kesici Aletler Karbür Uçlar serisi ürün koleksiyonu fotoğrafı
HY Kesici Aletler Karbür Uçlar serisi (ambalajlı)

Farklı boyutların bir arada yer aldığı bir teklif için, ekleme kodlarının ve miktarlarının satır satır listesini paylaşın. Her bir kalite, kaplama ve konfigürasyon için stok durumu, minimum miktar, numune gereklilikleri ve üretim teslim süresi teyit edilmiştir.

Stok ve Minimum Sipariş MiktarıÜrün kodu ve talep edilen miktarı teyit edin.
Numuneler ve OnayÖzel üretim siparişi vermeden önce numune özelliklerini ve değerlendirme kriterlerini kararlaştırın.
Teslim SüresiTeknik özellikler, miktar ve ambalaj onaylandıktan sonra sevkiyat zamanlamasını teyit edin.
Paketleme ve NakliyeKutu etiketlerini, paket miktarını, nakliye yöntemini ve gerekli belgeleri kararlaştırın.

Ürün listenizi ve kalite gereksinimlerinizi şu adres üzerinden gönderin: iletişim formu teknik özellikler, stok durumu ve teslimat onayı için.

◆Ürünlerle İlgili Sık Sorulan Sorular

What is high-feed milling?

A compatible high-feed cutter uses its entering-angle and insert geometry to produce a relatively thin chip at a shallow axial depth. This can permit a higher feed per tooth than conventional milling under the cutter maker's specified conditions. The allowable depth and feed depend on the complete cutter and insert combination.

Are LNMU0303, ENMU0603ER and BLMP0904R interchangeable?

No interchangeable fit is established by these family names. Match each complete code to the cutter's approved insert list and compare pocket, seat, screw, dimensions and cutting geometry before selecting a replacement.

How many cutting edges does each double-sided insert have?

A double-sided design can offer usable edges on both faces, but the count varies with the insert shape and edge design. Request the drawing and indexing instructions for the selected full model. The supplied description does not verify a common edge count for all three families.

Can these inserts mill steel, stainless steel and cast iron?

Suitability depends on the exact carbide grade, coating and geometry. Provide the workpiece grade and hardness, operation, coolant and expected cut type so an ISO P, M or K application can be checked against the offered variant.

Can I ramp, plunge or slot with this range?

These capabilities differ by cutter body and insert. Check the published maximum ramp angle, helical entry dimensions, allowable axial depth and full-width slotting guidance for your exact tool before programming the path.

Where are the exact dimensions and cutting parameters?

The supplied page content contains model names but no verified dimension drawing or grade-specific speed and feed table. Request the selected insert drawing and cutter-specific Vc, fz, ap and ae recommendations using the full insert and cutter-body codes.

◆Sipariş ve OEM ile İlgili Sık Sorulan Sorular

What information should I send for a replacement?

Send the original insert's full code and grade, box-label and both-face photos, cutter-body code, workpiece material, cutting conditions, current wear issue and required quantity. An approved sample cut should confirm fit and performance.

Can the three insert families be ordered together?

Provide a line-by-line list with the full model, grade and quantity for each family. Availability, pack count, minimum order quantity and lead time are confirmed by item.

Are coated grades and custom configurations available?

Share the target workpiece, cutter details and requested substrate, coating or edge geometry. Feasibility and the exact approved specification are confirmed in the quotation or drawing.

Can I request OEM marking or packaging?

Send the proposed marking, label artwork, pack format, model list and quantity. Confirm the sample, approved design and delivery terms before production.

◆Kılavuzlar ve Teknik Referanslar

Şunu kullanın: CNC Kesici Uç Seçim Kılavuzu ve Karbür Uç Türleri Kılavuzu ilk ekleme seçimi için.

For a drawing or quotation, send the complete insert and cutter-body codes with your workpiece and operation.

Ölçüler, fiyatlar veya özel seçenekler mi arıyorsunuz?

Fiyat teklifi almak için teknik özelliklerinizi ve miktarınızı gönderin.

  • Standart Boyutlar
  • Küçük Ölçekli Dava Kararları
  • Çeşitli Bedenler
  • OEM ve Özel Üretim
QR Kodunu Görüntüle – WeChat üzerinden Satış Departmanı ile İletişime Geçin
HY Kesici Aletler WeChat QR Kodu

WeChat üzerinden bizimle iletişime geçmek için bu kodu tarayın.

HY Ürün Sorgulama

WeChat

HY Kesici Aletler WeChat QR Kodu

WeChat üzerinden bizimle iletişime geçmek için bu kodu tarayın.