HRC45–HRC55 Четырёхзубчатая квадратная фреза из цельного твердого сплава для обработки стали

HRC45–HRC55 STEEL MILLING END MILL SERIES
4-flute solid carbide square end mill for stable profiling, shoulder milling and finishing in steel and alloys.
Профиль конца:Плоский / квадратный конец
Флейта Граф:4 флейты
Твёрдость стали:HRC45–HRC55
Угол спирали:35° / 38°
Диапазон:Ø1–Ø20 мм
Покрытие:AlTiN / TiAlN / TiSiN
Применение / Материал
P Углеродистая стальЛегированная сталь PP Инструментальная стальH — предварительно закаленная сталь
ЛУЧШИЙ ДЛЯ

HRC45–HRC55

For steel milling

Конструкция с 4 режущими кромками

Stable cutting

Точное фрезерование

Consistent accuracy

Smooth Finishing

Fine surface finish

HRC45/55 4-Flute Solid Carbide Square End Mill Overview

Это HRC45 / HRC55 4-flute solid carbide square end mill series is designed for side milling, shoulder milling and finishing in steel. Available in Метрические размеры Ø1–Ø20 мм with application-matched coatings, supporting mixed-size orders and repeat supply.

Настройка ключей

Square-End Cutting Profile

Designed for flat-bottom pockets, defined slot features and accurate 90° shoulders.

Rigid Four-Flute Core

Four cutting edges support stable engagement, tool rigidity and productive finishing in steel.

Steel-Matched Configuration

Carbide grade, edge preparation and coating are matched to steel hardness and cutting conditions.

Основные преимущества продукта

4-й этаж

Stable Tooth Engagement

Four flutes ensure stable side milling and finishing.

90°

Defined Square Features

Square-end geometry supports flat bottoms and precise 90° shoulders.

◆

Precision-Ground Geometry

Controlled cutting edges ensure consistent dimensions and surface finish.

H55

Flexible Steel Range

Series options cover general and selected pre-hardened steel conditions.

Операции фрезерования

The 4-flute square end mill supports stable side milling, shoulder milling and steel finishing, with cutting conditions matched to tool size and hardness.

Боковое фрезерованиеРЕКОМЕНДУЕТСЯ
Shoulder MillingРЕКОМЕНДУЕТСЯ
Profile FinishingРЕКОМЕНДУЕТСЯ
Light SlottingCONDITIONAL
Примечание по эксплуатации: Confirm slotting, ramping and plunging based on center-cutting geometry and chip evacuation.

Совместимость с материалами заготовок

ГРУППА МАТЕРИАЛОВ EXAMPLES APPLICATION LEVEL
P Углеродистая сталь General carbon and structural steels Основное применение
P Alloy & Tool Steel Alloy, tool and mold steels Confirm grade and hardness
H — предварительно закаленная сталь Selected pre-hardened steel conditions Application review required
Примечание по материалам: HRC45&55 is a conditional series target, not a guarantee for all steels or operations.

Product Details & Milling Demonstration

Product views and a reserved machining-video position for the HRC45–HRC55 4-flute solid carbide square end mill.

HRC45 to HRC55 four-flute solid carbide square end mill for steel
Four-flute square end mill cutting geometry
Coated solid carbide square end mill product detail
HRC45 HRC55 solid carbide end mill series
Four-flute solid carbide square end mill coating and edge detail

Технические характеристики

HRC45–HRC55 4-flute carbide square end mills for steel milling and finishing.

ПАРАМЕТР CONFIGURATION
Тип инструмента 4-flute solid carbide square end mill
Подложка Fine- / micro-grain carbide
Серия «Твёрдость» HRC45 / HRC55
Покрытие AlTiN / TiAlN / TiSiN (by series)
Диаметр реза Ø1–Ø20 мм

Select the HRC45 or HRC55 series according to material hardness and application.

Стандартные метрические размеры

HRC45 HRC55 four-flute solid carbide square end mill metric size series

Все размеры указаны в мм. Прокрутите страницу, чтобы посмотреть все размеры.

ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ SHANK d CUTTING D FLUTE L1 OAL L
Φ1×3×Φ4×50L 4 1 3 50
Φ2×6×Φ4×50L 4 2 6 50
Φ3×9×Φ4×50L 4 3 9 50
Φ3×9×Φ3×50L 3 3 9 50
Φ4×12×Φ4×50L 4 4 12 50
Φ5×13×Φ5×50L 5 5 13 50
Φ5×13×Φ6×50L 6 5 13 50
Φ6×15×Φ6×50L 6 6 15 50
Φ8×20×Φ8×60L 8 8 20 60
Φ8×24×Φ8×60L 8 8 24 60
Φ9×25×Φ10×75L 10 9 25 75
Φ10×25×Φ10×75L 10 10 25 75
Φ10×30×Φ10×75L 10 10 30 75
Φ12×30×Φ12×75L 12 12 30 75
Φ14×45×Φ14×100L 14 14 45 100
Φ20×45×Φ20×100L 20 20 45 100

Примечание: D = Cutting Diameter; L1 = Flute Length; d = Shank Diameter; L = Overall Length. Confirm availability before ordering.

Need Specific Sizes or Custom Options?

Contact us for HRC45–HRC55 end mill sizes, mixed-size orders and custom specifications.

Запрос Цитировать

Индивидуальная настройка и OEM

В рамках программ для дистрибьюторов и производителей оригинального оборудования (OEM) доступны индивидуальные размеры, геометрия и варианты с собственной торговой маркой.

Решения в области режущего инструмента для OEM-производителей и под частными торговыми марками
5mm 6mm 8mm 10mm 12mm sizes end mill with black coating HRC45general machining

Для специальных видов отделки алюминия также возможна разработка на основе чертежей и образцов.

Качество, контроль и доставка

Our solid carbide square end mills undergo material checks, precision grinding and final inspection to ensure consistent dimensions, cutting geometry and coating quality.

Контролируемое производство и итоговый контроль качества квадратных концевых фрез из цельного твердого сплава

HRC45–HRC55 4-Flute End Mill FAQs

Common questions about 4-flute solid carbide square end mills for steel milling.

What steels can an HRC45–HRC55 carbide end mill cut?
Carbon steel, alloy steel, tool steel and selected pre-hardened steel. Confirm the grade and hardness before machining.
HRC45 vs HRC55 end mills: What is the difference?
They target different steel hardness ranges. Carbide grade, coating and cutting geometry should match the selected HRC series.
2-flute vs 4-flute carbide end mills: Which is better for steel?
Four flutes support stable steel profiling and finishing. Two-flute tools provide more chip space for selected slotting operations.
What is a 4-flute square end mill used for?
Side milling, shoulder milling, profiling, pocket finishing and selected light slotting in steel.
Which coating is best for carbide end mills cutting steel?
AlTiN, TiAlN and TiSiN are possible options. Select the coating according to steel hardness and cutting conditions.
Can this 4-flute end mill be used for full-width slotting?
Light slotting may be possible with suitable geometry and chip evacuation. Heavy full-width slotting requires application review.

Sizes & OEM Ordering FAQs

Metric end mill sizes, custom options and distributor supply.

What metric sizes are available for 4-flute carbide end mills?
Reference diameters range from Ø1 to Ø20 mm, with different flute and overall lengths. Confirm availability by model.
Can custom carbide square end mills be manufactured?
Custom diameters, cutting lengths, shanks, coatings and tolerances can be reviewed based on drawings.
Are OEM and bulk carbide end mill orders supported?
Mixed-size orders, private-label packaging and repeat supply can be arranged according to quantity and specifications.
How do I request a quote for HRC45–HRC55 end mills?
Send the required sizes, HRC series, steel grade, coating preference and order quantity.

Технические материалы для скачивания

End mill catalog and reference cutting data.

Каталог твердосплавных концевых фрез

Product series and metric sizes.

Просмотреть каталог

Руководство по скоростям и подачам при фрезеровании

Reference cutting parameters.

Просмотреть руководство

Вам нужны размеры, цены или индивидуальные варианты?

Отправьте нам технические характеристики и количество товара для получения ценового предложения.

  • Стандартные размеры
  • Небольшие пробные заказы
  • Разные размеры
  • OEM и индивидуальные заказы
Посмотреть QR-код — связаться с отделом продаж в WeChat
QR-код WeChat компании «HY Cutting Tools»

Отсканируйте QR-код, чтобы связаться с нами в WeChat.

Запрос о продукции HY

WeChat

QR-код WeChat компании «HY Cutting Tools»

Отсканируйте QR-код, чтобы связаться с нами в WeChat.