인덱서블 U-드릴용 WCMX 050308 및 WCMT 06T308 초경 인서트
WCMX050308 and WCMT06T308 carbide inserts provide replaceable cutting edges for compatible indexable U-drills. Trigon geometry supports economical edge use, with grade and coating options matched to the workpiece material and drilling conditions.
표준 및 맞춤형 크기
표준 규격과 맞춤형 규격을 모두 제공합니다.
안정적인 반복 공급
재주문 시 일관된 사양.
OEM 및 자체 브랜드
표기, 라벨 및 포장 옵션을 선택할 수 있습니다.
유연한 주문
견본, 다양한 규격 및 소량 주문이 가능합니다.
제품 설명
WCMX050308 및 WCMT06T308 텅스텐 카바이드 U-드릴 인서트는 고효율 CNC 드릴링 및 터닝 응용 분야를 위해 설계되었습니다. 인덱서블 U-드릴 시스템용으로 설계된 이 인서트는 안정적인 절삭 성능, 뛰어난 칩 제어 및 뛰어난 내구성을 제공합니다. 프리미엄 초미립자 텅스텐 카바이드를 사용하여 제조된 이 인서트는 뛰어난 경도, 내마모성 및 열 안정성을 제공하여 까다로운 고속 가공 조건에서도 일관된 정확도를 보장합니다.
주요 기능
-
-
부드럽고 정확한 드릴링을 위한 정밀 연마 절삭날
-
U-드릴 애플리케이션에 특별히 최적화됨
-
-
공구 수명 연장을 위한 초미립자 텅스텐 카바이드
-
안정적인 칩 브레이커 설계로 안정적인 칩 배출 보장
-
빠른 절단 속도에서 뛰어난 성능
-
표준 WCMX/WCMT U-드릴 홀더와 호환 가능
장점
-
높은 홀 정확도와 우수한 표면 마감
-
절삭력 감소 및 스핀들 부하 최소화
-
일관된 성능으로 서비스 수명 연장
-
연속 및 대량 생산 드릴링에 이상적
-
빠른 인서트 교체가 가능한 비용 효율적인 인덱서블 솔루션
기술 매개변수
모델 삽입
| 모델 | 모양 | 사이즈 코드 | 애플리케이션 | 호환 홀더 |
|---|---|---|---|---|
| WCMX050308 | 트라이곤(80°) | 05×03×08 | U-드릴 드릴링 & 터닝 | WCMX U-드릴 홀더 |
| WCMT06T308 | 트라이곤(80°) | 06×T3×08 | 고정밀 드릴링 | WCMT U-드릴 홀더 |
| 매개변수 | 설명 |
|---|---|
| 모델 | WCMT03 / 04 / 05 / 06 / 08 U 드릴 인서트 |
| 재료 | 카바이드 |
| 공작물 | 알루미늄 / 구리 / 강철 / 경화강 / 스테인리스강 / 주철 |
| 처리 | 마감, 반정삭, 황삭 |
| 코팅 | CVD/PVD 코팅 |
| 색상 | 회색 |
| MOQ 수량 | 10개 |
| 패키지 | 10개 / 박스 |
소재 및 코팅
-
서브스트레이트: 초미립자 텅스텐 카바이드
-
코팅 옵션: PVD/CVD(용도에 따라 TiN, TiAlN, AlTiN)
-
경도: HRA 91-93
-
강인함: 안정적인 드릴링을 위한 높은 내파괴성
커팅 성능
-
적합한 자료:
강철(≤45-55HRC), 주철, 스테인리스강, 합금강, 알루미늄 합금 -
커팅 속도(Vc):
80-180m/min(스틸), 120-250m/min(스테인리스 스틸), 200-400m/min(알루미늄) -
피드 속도(Fz):
재료 및 드릴 직경에 따라 0.05-0.20mm/회전
애플리케이션
-
CNC U-드릴 홀 가공
-
자동차 부품 제조
-
일반 기계 및 금형 산업
-
항공우주 구조 부품
-
고속 산업 생산 라인


WCMX/WCMT U-Drill Insert Specifications
This page lists WCMX050308 그리고 WCMT06T308 carbide inserts for compatible indexable U-drills. Select the complete insert designation together with the drill-body model, pocket position, carbide grade and chipbreaker. An insert model alone does not identify the finished hole diameter or guarantee fit in another drill body.
| 매개변수 | Specification / selection check |
|---|---|
| Listed models | WCMX050308 and WCMT06T308. |
| Insert form | W-style trigon indexable insert; confirm pocket geometry and locating features for each model. |
| 공구 재질 | Carbide. Substrate grade, edge preparation, chipbreaker and coating depend on the ordered configuration. |
| 작전 | Indexable drilling in a compatible U-drill body. Other operations require an approved holder and application data. |
| Workpiece groups | Grade-dependent choices for steel (ISO P), stainless steel (M), cast iron (K) and selected non-ferrous materials (N). |
| Fit checks | Drill-body code, pocket designation, center/peripheral position, seating, clamp screw and approved insert list. |
| Supply reference | Listed MOQ: 10 pieces; listed pack: 10 pieces per box. Confirm by complete item code. |
Model & Drawing Confirmation
| Listed model | 가족 | Confirm against the approved drawing |
|---|---|---|
| WCMX050308 | WCMX05 | Actual size, thickness, corner radius, hole and seating geometry, grade and chipbreaker. |
| WCMT06T308 | WCMT06 | Actual size, thickness, corner radius, hole and seating geometry, grade and chipbreaker. |
A dimensioned drawing for either model is not provided on this page. WCMT03/04/05/08 are family references, not complete order codes for the two listed models. Request the approved product drawing before checking a replacement against the drill-body pocket.
삽입물 선택 방법
1. Identify the drill body: record its manufacturer, complete designation, nominal hole diameter and drilling depth.
2. Match the pocket: verify WCMX or WCMT, insert size, center/peripheral position and clamping components using the drill maker's approved list.
3. Choose the cutting configuration: specify the workpiece grade and hardness, carbide grade, chipbreaker, coating and coolant conditions.
4. Validate the setup: trial the complete assembly and check chip evacuation, hole size, edge wear and finish.
Cutting Data & Technical Notes
Cutting-speed and feed values require a specific grade, drill diameter, pocket combination and workpiece hardness. Use the approved drill-body and insert-grade data for starting settings; verify the result on the actual machine. Hardened-steel suitability, coating chemistry and substrate hardness require product-specific confirmation.
For a model-specific drawing or quotation, send the drill body and full insert codes with your material, hole diameter/depth, current insert photos and required quantity.
◆초경 인서트 맞춤 제작 및 OEM
가공 공작, 공작물 및 홀더에 사용할 인서트를 지정해 주십시오. 귀사의 인서트 명칭, 도면 또는 샘플을 바탕으로 표준 대체품, 용도별 형상 및 자사 브랜드 요구 사항을 검토해 드릴 수 있습니다. 요청하신 각 시리즈에 대해 사용 가능한 재질, 코팅, 치수 및 주문 수량을 확인해 드립니다.
기하학적 구조 및 칩 제어
해당 가공 및 공작물에 대해 칩브레이커, 경사각, 절삭날 준비 상태, 노즈 반경 및 코너 설계를 검토하십시오. 수정된 형상을 승인하기 전에 홀더와의 호환성을 확인하십시오.
기판 및 코팅
가공 대상 재료, 절삭 조건, 그리고 내마모성과 절삭날 인성의 바람직한 균형을 고려하여 사용 가능한 초경합금 등급과 코팅을 선택하십시오.
치수 및 OEM
승인된 사양에 따라 삽입물의 크기, 두께, 위치 결정 및 고정 기능, 공차, 레이저 마킹 및 자체 브랜드 포장을 검토하십시오.
◆사용자 지정 옵션
문의 사항을 보내실 때는 아래 입력란을 이용해 주십시오. 구체적인 옵션은 삽입 제품군에 따라 다르며, 견적서나 승인된 도면에서 확인하실 수 있습니다.
| 사양 | 확인해야 할 세부 사항 |
|---|---|
| 삽입 유형 | 선삭, 밀링, 나사 가공, 홈 가공 또는 드릴링용 인서트; 제품 명칭이나 도면을 보내주십시오. |
| 사이즈 및 핏 | 형상, 크기, 두께, 내접원 또는 모서리 길이, 구멍 또는 클램핑 형태, 홀더 모델. |
| 절단 지오메트리 | 칩 브레이커, 노즈 또는 코너 반경, 절삭면 가공, 절삭 방향 및 용도별 프로파일. |
| 등급 및 코팅 | 가공물 그룹 및 등급, 초경 기판, 코팅 시스템, 그리고 습식 또는 건식 절삭 조건. |
| 공차 및 검사 | 중요 치수, 형상 요구 사항, 검사 방법 및 필요한 모든 보고서. |
| OEM 프레젠테이션 | 삽입 또는 박스 표기, 라벨 내용, 포장 형태 및 1팩당 수량. |
◆맞춤형 삽입물 요청 방법

삽입물 관련 요청 사항은 당사의 문의 양식 또는 다음을 확인해 보세요. OEM 및 자체 브랜드 서비스.
◆초경 인서트 품질 관리

인서트의 품질은 승인된 등급, 형상, 코팅 및 치수 사양에 따라 달라집니다. 당사는 주문 확정 시 요구 사항을 검토하고, 인서트 시리즈 및 고객 도면에 맞춰 검사 범위를 조정합니다. 생산 전에 중요 치수나 필요한 문서를 알려주시면, 이를 합의된 검사 계획에 반영할 수 있습니다.
01 · 입고 자재
주문 요건에 따라 지정된 초경합금 등급 또는 재료 관련 문서를 확인하십시오.
02 · 공정 중 검사
생산 과정에서 승인된 사양에 따라 치수와 최첨단 기능을 검토하십시오.
03 · 최종 검사
합의된 치수, 외관, 모서리 상태, 코팅 식별 정보 및 해당되는 경우 표시 사항을 확인하십시오.
04 · 포장 검토
승인된 주문서와 대조하여 품목 코드, 수량, 라벨 및 보호 포장을 확인하십시오.
◆검사 및 문서화
주문된 제품군에 대해서는 검사 항목과 합격 기준을 합의해야 합니다. 맞춤형 인서트의 경우, 승인된 도면이 일반적인 카탈로그 설명보다 우선합니다.
| 확인 영역 | 확인해야 할 사항 |
|---|---|
| 사이즈 및 핏 | 크기, 두께, 모서리 반경, 클램핑 특징 및 도면의 공차 사항을 입력하십시오. |
| 절단 지오메트리 | 칩 브레이커, 모서리 가공, 사용 가능한 모서리 및 해당되는 경우 프로파일. |
| 등급 및 코팅 | 승인된 등급 및 코팅 명칭; 요청된 모든 검증 방법. |
| 외관 및 포장 | 눈에 띄는 모서리 손상, 표시, 품목 코드, 수량 및 포장 방식. |
| 요청된 기록 | 검사 보고서, 자재 또는 도장 관련 문서, 합의된 경우 시료 승인서 또는 로트 식별 정보. |
◆주문 및 배송


다양한 규격이 혼합된 견적서에 대한 삽입 코드 및 수량을 줄별로 나열하여 제공해 주십시오. 각 등급, 코팅 및 구성에 대해 재고 현황, 최소 주문 수량, 샘플 요구 사항 및 생산 리드 타임을 확인해 주십시오.
당사의 다음 경로를 통해 품목 목록과 품질 요구 사항을 보내주십시오. 문의 양식 사양, 재고 현황 및 배송 확인을 위해.
제품 자주 묻는 질문
What is the difference between WCMX050308 and WCMT06T308?
They are different insert designations and sizes. Match each full code to the U-drill body's specified pocket; the shared W-style trigon outline does not make the two inserts interchangeable. Request the individual drawings to compare dimensions and seating features.
Can I use either insert in any WCMX or WCMT U-drill?
No. Confirm the drill manufacturer and complete body code, pocket size, center/peripheral position, seat and screw against the body's approved insert list. A matching family name alone is insufficient.
Does the insert code tell me the finished drilling diameter?
No. The U-drill body establishes the nominal hole diameter. The insert designation identifies the replaceable cutting component; verify actual hole size in a trial cut.
Are the center and peripheral inserts always the same?
That depends on the drill design. Some bodies specify different grades, chipbreakers or inserts for the center and outer pockets. Use the recommended combination for the exact drill body and workpiece.
Which materials and coatings are available?
The range can be reviewed for steel, stainless steel, cast iron and selected non-ferrous alloys using material-specific carbide grades. PVD and CVD are listed as options, but a coating and grade must be confirmed for each full code. Hardened-steel use needs separate validation.
What cutting speed and feed should I start with?
Use grade-specific data for the complete drill body, nominal diameter, hole depth, workpiece and coolant system. Confirm the starting values for the selected insert grade and setup, then check chip evacuation, hole size and insert wear in a controlled trial.
주문 및 OEM 관련 자주 묻는 질문
What should I send for a replacement-insert quotation?
Send the complete drill-body and current insert codes, photos of the box label, insert and pocket, center/outer position, workpiece grade, hole diameter/depth and required quantity.
Can WCMX and WCMT models be included in one inquiry?
Yes. List each full insert code, grade, chipbreaker and quantity separately. Mixed-model supply and availability are confirmed by item.
What are the MOQ and standard box quantity?
The listed minimum is 10 pieces and the listed pack is 10 pieces per box. Confirm the actual terms for the selected insert, grade and packaging in the quotation.
샘플이나 자사 브랜드 포장 서비스를 요청할 수 있나요?
Include the exact item code, trial conditions, quantity and artwork requirements. Sample availability, marking and packaging are reviewed for the requested configuration.
가이드 및 기술 참고 자료
다음의 CNC 인서트 선정 가이드 for grade and geometry checks. For an overview of drill-body types, see WC형 대 SP형 U 드릴.
For exact dimensions, approved grades or a quotation, send the complete drill-body and insert codes.
사이즈, 가격 또는 맞춤 제작 옵션이 필요하신가요?
견적 요청을 위해 사양과 수량을 보내주십시오.
- 표준 크기
- 소액 재판 명령
- 다양한 사이즈
- OEM 및 맞춤형 제작
QR 코드 보기 – 위챗으로 영업팀에 문의하기
위챗으로 문의하시려면 QR 코드를 스캔하세요.
위챗
위챗으로 문의하시려면 QR 코드를 스캔하세요.















