2-Flute Solid Carbide Micro Drill for Stainless Steel
Kualitas yang Konsisten
Geometri yang konsisten pada setiap pesanan berulang.
Pesanan Fleksibel
Tersedia dalam jumlah kecil dan berbagai ukuran.
Dukungan OEM
Penandaan khusus, label, dan kemasan.
Standar & Khusus
Ukuran standar dan konfigurasi khusus.
2-Flute Solid Carbide Micro Drill Overview
This 2-flute solid carbide micro drill is designed for precision small-hole machining in selected stainless-steel grades. The confirmed standard range covers Ø0.20–1.00 mm cutting diameters with a 3 mm fixed cylindrical shank. Fine-grain carbide, precision-ground cutting geometry and diameter-specific flute lengths support rigidity, controlled entry and chip evacuation in micro drilling. The series can be used for blind holes, through holes and functional passages on precision CNC lathes, Swiss-type lathes, machining centers and micro-drilling machines under low-runout, short-overhang and stable coolant conditions.
Ø0.20–1.00 mm
2 Flutes
3 mm Fixed Shank
ISO M Stainless Steel
Key Configuration
Application-Specific PVD Coating
Coating options can be reviewed according to the stainless-steel grade, hardness, coolant condition and required tool life.
3 mm Fixed Cylindrical Shank
A common 3 mm shank provides a consistent clamping interface across the listed micro-drill diameter range.
Diameter-Specific Flute Length
Flute length is matched to drill diameter to provide practical chip space while avoiding unnecessary loss of stiffness.
Key Product Advantages
Workpiece Material Compatibility
Applications & Target Scope
- Blind micro holes in precision stainless-steel components
- Small through holes with controlled breakthrough
- Oil or lubrication passages
- Vent and pressure-relief micro passages
- Positioning or reference holes
- Pre-reaming holes for confirmed micro-reaming operations
Product & Cutting-Edge Details
Tool Nomenclature & Dimensions
Reference dimensions and configuration for this 2-flute solid carbide micro drill for stainless steel. The confirmed standard series covers Ø0.20–1.00 mm cutting diameters with a fixed 3 mm cylindrical shank. Flute length is matched to cutting diameter to maintain practical reach and rigidity in micro-hole machining.
Standard Size Range
The confirmed product series uses a fixed 3 mm shank with diameter-specific flute lengths. The table below summarizes the validated standard range without replacing the detailed production size chart.
Stainless-Steel Micro-Drilling Guidance
- Control Runout: Use a clean precision holder matched to the 3 mm shank and verify runout close to the cutting section.
- Keep Overhang Short: Use only the flute length and tool reach required for the actual hole depth.
- Maintain Continuous Feed: Avoid unnecessary dwell that can increase rubbing and promote stainless-steel work hardening.
- Support Chip Evacuation: Direct coolant or mist toward the cutting zone and monitor chip packing, especially in blind or relatively deep micro holes.
Recommended Starting Cutting Parameters
Starting cutting conditions should be adjusted according to micro-drill diameter, stainless-steel grade, hardness, hole depth, tool overhang, spindle runout and coolant delivery. Use the general carbide-drill data as a reference rather than as fixed values for every micro-drilling application.
Solid Carbide Drill Cutting Data Guide
Use the guide as a starting reference, then reduce or adjust conditions for small diameters, long reach and low-rigidity setups.
Micro Drill Product Family Overview
Compare the required material, hole depth and machine setup before selecting a standard or application-specific micro-drill configuration.
Standard Micro Drill
General Small-Hole Machining
Stainless Micro Drill
ISO M Application (Current)
Swiss-Type Micro Drill
Precision Lathe Applications
Long-Neck Micro Drill
Deep / Recessed Small Holes
For additional drill sizes and related series, View the Solid Carbide Drill Catalog . Custom micro-drill dimensions can be reviewed according to your drawing or application requirements.
Stainless Steel Micro Drill Customization
Cutting diameter, flute length, point geometry, edge preparation and coating can be configured for micro-hole drilling in stainless steel. Geometry is reviewed to manage cutting load, work hardening, heat and chip evacuation at small diameters.
Stainless-Specific Micro Geometry & Edge Preparation
The micro-point, web thickness, flute space and cutting-edge preparation can be configured to balance edge strength, controlled entry and chip evacuation in stainless-steel applications.
Layanan OEM & Merek Pribadi
OEM manufacturing and private-label supply options for stainless-steel component manufacturers, tooling distributors and repeat-production customers.
Tool Identification
Tool codes, diameter specifications and batch identification can be applied according to the available shank area.
Protective Packaging
Individual protective tubes, internal supports, diameter labels and private-label packaging help protect delicate micro cutting edges.
Commercial Terms
Flexible MOQ options for sample evaluation, custom-size trials, repeat orders and scheduled batch supply.
Technical Workflow
Inquiry
Submit the stainless grade, hardness, hole dimensions, tolerance and quantity.
Engineering
Point geometry, flute space, edge strength and coating are reviewed.
Commercial
Quotation, trial quantity, production schedule and delivery terms are confirmed.
Production
Precision micro-grinding, controlled edge preparation, coating and marking.
Quality Control
Diameter, point form, flute length, runout and micro-edge condition are inspected before dispatch.
Inspection & Quality Control
Drill dimensions, cutting-edge geometry and visible surface condition are checked according to the confirmed product specification and application requirements.
Protective Packing for Shipment
Finished drills are protected individually before batch labeling and export-carton reinforcement.
Individual Tool Protection
Each drill is individually protected in a plastic tube to reduce contact damage during storage, handling and transportation.
Batch & Label Verification
Tools are grouped and labeled by specification to support order verification before carton packing.
Export Carton Protection
Batch packaging, cushioning materials and reinforced export cartons are selected according to the order quantity and shipping method.
Reference Lead Time
The following timeframes are general references. Availability and production scheduling are reviewed for each order.
Shipping Options
Shipping arrangements can be selected according to order size, delivery schedule and destination.
Pertanyaan Umum tentang Produk
Product-specific information about stainless-steel micro drilling, available sizes, coolant requirements, coating options and custom configurations for this 2-flute solid carbide micro drill.
What stainless-steel materials is this micro drill designed for?
This drill is intended for precision small-hole machining in stainless-steel components. Common austenitic, martensitic and precipitation-hardening stainless grades can be reviewed according to the exact material grade, hardness, hole diameter and machining conditions. Final cutting parameters should be confirmed for the actual application.
Why is a 2-flute geometry used for stainless-steel micro drilling?
A 2-flute configuration provides a practical balance between cutting-edge support and chip evacuation for small-diameter drilling. For stainless steel, maintaining controlled chip removal is especially important because long chips, adhesion and work hardening can increase cutting load in micro-hole applications.
What diameters and length configurations are available?
Standard micro-drill sizes and custom non-standard dimensions can be supplied. Cutting diameter, flute length, overall length and shank dimensions can be reviewed according to the required hole size, drilling depth, machine setup and customer drawing.
Is coolant recommended when drilling stainless steel with a micro drill?
Yes. Stable cooling and lubrication are generally recommended for stainless-steel micro drilling to help control heat, reduce material adhesion and support chip evacuation. The appropriate coolant method depends on hole depth, drill diameter, machine configuration and whether external or through-coolant delivery is available.
Can the point geometry and coating be customized for different stainless-steel grades?
Yes. Point geometry, edge preparation, flute design and coating can be reviewed according to the stainless-steel grade, hardness, hole depth and required tool life. Application-specific PVD coatings or uncoated configurations can be selected after confirming the machining conditions.
Informasi apa saja yang diperlukan untuk mendapatkan penawaran harga?
Please provide the required cutting diameter, hole depth, flute length, workpiece material grade, hardness, coolant condition and estimated quantity. For non-standard micro drills, a drawing or dimensional sketch is recommended so the geometry and tolerances can be confirmed before quotation.
Pertanyaan Umum (FAQ) tentang Pemesanan & OEM
General information for trial orders, mixed-size purchasing, private labeling and production scheduling.
Do you accept small trial orders?
Yes. Small trial orders are available for application testing, distributor evaluation and customer approval before larger-volume purchasing.
Can mixed sizes be ordered together?
Yes. Different micro-drill diameters and length configurations can normally be combined in one order when the production and coating requirements are compatible. Mixed-size orders are suitable for distributors and multi-size application testing.
Is OEM laser marking available?
Yes. Custom laser marking for logos, model numbers, size identification and batch information can be reviewed together with private labels and OEM packaging requirements.
What is the typical production lead time?
Lead time depends on the diameter, length, coating, quantity and whether the drill is a standard or custom configuration. The production schedule is confirmed after the specifications and order requirements are finalized.
Downloads & Technical Resources
Access product dimensions, series information and starting cutting data for product selection and application review.
Butuh informasi mengenai ukuran, harga, atau opsi khusus?
Kirimkan kepada kami jenis alat yang dibutuhkan, ukuran, jumlah, bahan benda kerja, serta persyaratan OEM atau khusus apa pun. Kami akan mengonfirmasi spesifikasi yang sesuai, ketersediaan, waktu tunggu, dan rincian penawaran harga.
Gambar, daftar ukuran, dan foto referensi sangat kami harapkan.
