TiCN-beschichtete HSS-E-Spiralnut-Gewindebohrer M2–M24
TiCN-coated HSS-E spiral flute taps for M2–M24 metric blind holes, with wear protection and chip evacuation toward the shank.
TiCN Coated
HSS-E Construction
Gewindeschneiden in Sacklöchern
M2–M24 Sizes
TiCN-beschichtete HSS-E-Spiralnut-Gewindebohrer M2–M24
TiCN-coated HSS-E spiral flute machine taps for metric blind-hole threading. The wear-resistant coating supports repeated tapping, while helical flutes carry chips toward the hole entrance. The listed range covers 16 coarse-thread specifications from M2 × 0.4 to M24 × 3.0.
HSS tap range — general product display
Wear Protection for Repeat Blind-Hole Tapping
TiCN-Coated Surface
Titanium carbonitride provides a hard, wear-resistant surface for suitably matched tapping conditions.
Spiral Flute Chip Control
Helical channels help remove chips from blind holes without a bottom exit.
HSS-E Machine Tap Body
HSS-E combines toughness and heat resistance for production threading. Confirm the exact grade where required.
Metric Blind-Hole Tapping Applications
These coated machine taps support drawing-specified internal threads on CNC machining centers and tapping machines. Typical applications include:
- Blind threaded holes in housings and mounting brackets.
- General engineering and industrial equipment components.
- Repeat batches of metric-threaded parts requiring controlled chip removal.
Am besten geeignet für: Metric blind-hole production where spiral flute chip evacuation and coated-tool wear resistance are required.
Nicht ideal für: Chipless thread forming or bottoming requirements without confirmed chamfer and clearance.
Auswahl des Werkstückmaterials
Carbon steel, alloy steel, selected stainless steels and non-ferrous alloys can be reviewed for this series. Match the tap geometry and TiCN coating to material grade, hardness, chip behavior and lubrication.

General material reference; confirm suitability for the selected HSS-E tap.
Match Thread Depth, Tap Size & Holder Fit
- Thema: Specify complete metric diameter, pitch and required tolerance.
- Tiefe: Allow for the cutting lead, chip space and blind-hole bottom clearance.
- Inhaber: Check shank diameter, drive square, overall length and reach.
- Anwendung: Confirm material, pilot-hole size, lubrication and synchronized tapping settings.
Flute length is a tool dimension, not guaranteed full-thread depth. Confirm tap limits and chamfer for the ordered model.
TiCN Spiral Fluted Tap Product Details




TiCN-Coated HSS-E Spiral Flute Tap Sizes
Bezugsmaße für TiCN-coated HSS-E spiral flute taps in 16 metric coarse-thread sizes, from M2 × 0.4 to M24 × 3.0. Match thread size, tool length and shank dimensions to your blind-hole tapping requirements. All dimensions are in millimeters.
M2–M24 Metric Tap Dimensions
| Gewindegröße | Flute Length L1 | Schaft-Ø D | Overall Length L | Reference Drill Ø |
|---|---|---|---|---|
| M2 × 0.4 | 7 | 2.5 | 45 | 1.6 |
| M2.5 × 0.45 | 8 | 2.5 | 49 | 2.1 |
| M3 × 0,5 | 9 | 3.2 | 49 | 2.5 |
| M3.5 × 0.6 | 13 | 3.2 | 52 | 2.9 |
| M4 × 0,7 | 11 | 4.0 | 56 | 3.3 |
| M5 × 0,8 | 13 | 4.5 | 64 | 4.2 |
| M6 × 1,0 | 15 | 4.5 | 66 | 5.0 |
| M8 × 1,25 | 16 | 5.0 | 70 | 6.8 |
| M10 × 1,5 | 20 | 5.5 | 75 | 8.5 |
| M12 × 1,75 | 22 | 6.5 | 82 | 10.3 |
| M14 × 2.0 | 30 | 8.0 | 88 | 12.0 |
| M16 × 2.0 | 32 | 10.0 | 95 | 14.0 |
| M18 × 2.5 | 37 | 11.0 | 100 | 15.5 |
| M20 × 2.5 | 37 | 12.0 | 100 | 17.5 |
| M22 × 2.5 | 38 | 13.0 | 115 | 19.5 |
| M24 × 3.0 | 45 | 15.0 | 120 | 21.0 |
Drill diameters are reference values. Confirm pilot-hole size for the material and thread requirement. Flute length does not equal achievable full-thread depth.
Benötigen Sie Informationen zu Größen, Preisen oder individuellen Optionen?
Send your thread size, material, blind-hole depth and quantity for TiCN-coated tap selection and quotation.
Blind-Hole Tap Selection Checks
- Thema: Match metric diameter, pitch and required thread tolerance.
- Tiefe: Confirm usable cutting length, chamfer and bottom clearance.
- Inhaber: Check shank fit, tool reach and alignment.
- Material: Match the HSS-E tap, TiCN coating and lubrication to the workpiece grade and hardness.
Confirm exact HSS-E grade, tap limits, chamfer, helix angle and flute count with the selected specification.
Spiral Flute Tap Speeds & Feeds
Select starting speed for the workpiece material, tap diameter, coating, thread depth and lubrication. The chart below is a general HSS reference for M2–M12; it does not provide product-specific TiCN HSS-E cutting data or settings for M14–M24.

Synchronized feed: Feed per revolution equals pitch for single-start metric threads. Feed (mm/min) = RPM × pitch (mm).
Example: M6 × 1.0 at 300 RPM requires 300 mm/min feed. This illustrates the calculation only.
HSS-E Spiral Flute Tap Customization
Custom specifications for TiCN-coated HSS-E spiral flute taps can be reviewed for metric blind-hole threading and repeat production.
- Thema: Special diameters, pitches and tap limits.
- Geometrie: Spiralnuten und Fasen, die auf das Material und die Bohrungstiefe abgestimmt sind.
- Abmessungen: Working length, overall length, neck, shank and drive square.
- Beschichtung: TiCN or alternative finishes reviewed for the application.
Die endgültigen Spezifikationen, die Mindestbestellmenge und die Lieferzeit werden mit dem Angebot bestätigt.


OEM & Private-Label Machine Taps
Branding and protective packaging for distributors, importers and tooling brands.
- Laser marking: Logo, thread size and product code, subject to shank space.
- Verpackung: Protective tubes, labels and branding to approved artwork.
Request a Custom Tap Quote: Send your thread specification or drawing, material and hardness, required thread depth, quantity and branding needs.
Anforderungen für Wasseranschlüsse einreichenHSS-E Spiral Flute Tap Quality & Inspection
TiCN-coated HSS-E spiral flute taps are checked against confirmed specifications for consistent repeat supply.

Wichtige Prüfpunkte
- Material: Specified HSS-E grade and agreed hardness.
- Thread & geometry: Size, pitch, tap limits, spiral flutes, chamfer and cutting edges.
- Abmessungen: Flute length, overall length, shank, drive square and specified runout.
- Final checks: TiCN coating condition, marking and labels.
Die erforderlichen Berichte und die Validierung der Probenfäden werden vor der Bestellung vereinbart.
Schutzverpackung und Kennzeichnung
Individual packaging protects tap threads and cutting edges. Labels identify the size and order or batch reference.

Lieferzeit und Exportversand
Standard-Wasserhähne: In der Regel 1–3 Werktage, vorbehaltlich der Verfügbarkeit.
Benutzerdefinierte Wasserhähne: Die Lieferzeit richtet sich nach den Spezifikationen, der Beschichtung und der Menge.
Export packing, shipping and payment terms are confirmed with the order.


TiCN-Coated HSS-E Spiral Flute Tap FAQs
Why choose HSS-E spiral flute taps for metric blind holes?
Which M2–M24 TiCN-coated metric tap sizes are available?
What does TiCN coating offer for production tapping?
Can TiCN-coated HSS-E taps be used for steel and stainless steel?
How do I select tap-drill size and full-thread depth for a blind hole?
Should I use a spiral flute tap or spiral point tap for through holes?
How should I set CNC tapping speed and feed for HSS-E taps?
Custom Taps & Wholesale Orders
Can HSS-E spiral flute taps be customized with OEM branding?
What is the MOQ for sample or mixed-size metric tap orders?
What details are needed for tap pricing and delivery confirmation?
Katalog und Auswahlressourcen aufrufen
Benötigen Sie Informationen zu Größen, Preisen oder individuellen Optionen?
Senden Sie uns Ihre Spezifikationen und die gewünschte Menge, damit wir Ihnen ein Angebot unterbreiten können.
- Standardgrößen
- Kleine Probestellungen
- Verschiedene Größen
- OEM & Sonderanfertigungen
QR-Code anzeigen – Vertrieb über WeChat kontaktieren
Scannen Sie den QR-Code, um uns über WeChat zu kontaktieren.
Scannen Sie den QR-Code, um uns über WeChat zu kontaktieren.














