HRC45–HRC65 – 2-schneidiger VHM-Kugelfräser für Stahl und Formenstahl
The HRC45–HRC65 2-flute solid carbide ball nose end mill series offers hardness-matched tooling for precision 3D contouring and mold finishing in steel, alloy steel and mold steel.
- ◆HRC45–HRC65 Series Options – For different steel hardness levels.
- ◆Optimierte 2-flutige Geometrie – Stable cutting and chip evacuation.
- ◆Precision 3D Contouring – Smooth mold profiles and curved surfaces.
Standard- und Sondergrößen
Es sind Standardgrößen und Sondermaße erhältlich.
Stabile, wiederkehrende Lieferungen
Einheitliche Spezifikationen für Nachbestellungen.
OEM- und Eigenmarkenlösungen
Es stehen verschiedene Kennzeichnungs-, Etikettierungs- und Verpackungsoptionen zur Verfügung.
Flexible Bestellungen
Muster, gemischte Größen und Kleinserienbestellungen sind möglich.
HRC45-HRC65 Solid Carbide Ball Nose End Mill Overview
Die HRC45–HRC65 2-flute solid carbide ball nose end mill series supports 3D contouring and mold steel semi-finishing and finishing. Carbide grades and coatings are matched to workpiece hardness, with standard and custom sizes available for mixed-size orders and repeat supply.
Key Product Advantages
Smooth 3D Toolpaths
Supports smooth contouring of curved and free-form surfaces.
Stable Chip Evacuation
Two flutes balance chip clearance and edge support for steel finishing.
Wide Hardness Coverage
HRC45–HRC65 series options for general and hardened steels.
Standard & Lange Reichweite
Multiple shank and length options for standard and deep-cavity machining.
Fräsvorgänge
3D Contouring
Mold Cavity Milling
Profile Milling
Semi-Finishing
Surface Finishing
Anwendungshinweis: Because cutting speed changes across the ball profile, use suitable step-over and avoid relying on the tool center for heavy material removal. Reduce engagement for long-reach sizes.
Workpiece Material Compatibility
| MATERIAL GROUP | EXAMPLES | APPLICATION LEVEL |
|---|---|---|
| P Steel | Carbon steel and alloy steel | HRC45-series configuration |
| H-Stahl (vorgehärtet) | Pre-hardened mold and die steel | HRC45–HRC55 configuration |
| H Hardened Steel | Selected hardened tool and mold steel | HRC60–HRC65 configuration |
Series Selection Note:
HRC45–HRC65 indicates separate tool series. Confirm material grade and hardness for proper tool and coating selection.
Product Details & Milling Demonstration
Detailed product views and a machining demonstration of the HRC45–HRC65 2-flute solid carbide ball nose end mill series for steel.
HRC45–HRC65 Ball Nose End Mill Specifications
Two-flute HRC45-HRC65 Solid Carbide Ball Nose End Mill series for steel and mold finishing, with HRC45–HRC65 application-specific configurations.
| Parameter | Spezifikation |
|---|---|
| Werkzeugtyp | Solid Carbide Ball Nose End Mill |
| Profilende | Full-Radius Ball Nose |
| Flöten | 2 |
| Hardness Series | HRC45 / HRC55 / HRC60 / HRC65 |
| Werkzeug Material | Feinkörniges Vollhartmetall |
| Beschichtung | Application-Matched Options |
| Cutting Direction | Right-Hand |
| Anwendungen | 3D Contouring, Mold Semi-Finishing & Finishing |
Standardgrößen
Reference metric sizes for the HRC45-HRC65 Solid Carbide Ball Nose End Mill series. All dimensions in mm.
Scroll to view all standard sizes.
| TECHNISCHE DATEN | SHANK d | CUTTING D | FLUTE L1 | RADIUS R | OAL L |
|---|---|---|---|---|---|
| R0.5×2×D4×50L | 4 | 1 | 2 | 0.5 | 50 |
| R0.75×3×D4×50L | 4 | 1.5 | 3 | 0.75 | 50 |
| R1×4×D4×50L | 4 | 2 | 4 | 1 | 50 |
| R1.25×5×D4×50L | 4 | 2.5 | 5 | 1.25 | 50 |
| R1.5×6×D3×50L | 3 | 3 | 6 | 1.5 | 50 |
| R1.5×6×D3×75L | 3 | 3 | 6 | 1.5 | 75 |
| R1.5×6×D3×100L | 3 | 3 | 6 | 1.5 | 100 |
| R1.5×6×D4×50L | 4 | 3 | 6 | 1.5 | 50 |
| R1.5×6×D6×50L | 6 | 3 | 6 | 1.5 | 50 |
| R1.75×7×D4×50L | 4 | 3.5 | 7 | 1.75 | 50 |
| R2×8×D4×50L | 4 | 4 | 8 | 2 | 50 |
| R2×8×D4×75L | 4 | 4 | 8 | 2 | 75 |
| R2×8×D4×100L | 4 | 4 | 8 | 2 | 100 |
| R2.5×10×D5×50L | 5 | 5 | 10 | 2.5 | 50 |
| R2.5×10×D5×75L | 5 | 5 | 10 | 2.5 | 75 |
| R2.5×10×D5×100L | 5 | 5 | 10 | 2.5 | 100 |
| R2.5×10×D6×50L | 6 | 5 | 10 | 2.5 | 50 |
| R3×12×D6×50L | 6 | 6 | 12 | 3 | 50 |
| R3×12×D6×75L | 6 | 6 | 12 | 3 | 75 |
| R3×12×D6×100L | 6 | 6 | 12 | 3 | 100 |
| R3×12×D6×150L | 6 | 6 | 12 | 3 | 150 |
| R3.5×14×D8×60L | 8 | 7 | 14 | 3.5 | 60 |
| R4×16×D8×60L | 8 | 8 | 16 | 4 | 60 |
| R4×16×D8×75L | 8 | 8 | 16 | 4 | 75 |
| R4×16×D8×100L | 8 | 8 | 16 | 4 | 100 |
| R4×16×D8×150L | 8 | 8 | 16 | 4 | 150 |
| R4.5×18×D10×75L | 10 | 9 | 18 | 4.5 | 75 |
| R5×20×D10×100L | 10 | 10 | 20 | 5 | 100 |
| R5×20×D10×150L | 10 | 10 | 20 | 5 | 150 |
| R5.5×22×D12×75L | 12 | 11 | 22 | 5.5 | 75 |
| R6×24×D12×75L | 12 | 12 | 24 | 6 | 75 |
| R6×24×D12×100L | 12 | 12 | 24 | 6 | 100 |
| R6×24×D12×150L | 12 | 12 | 24 | 6 | 150 |
| R7×28×D14×80L | 14 | 14 | 28 | 7 | 80 |
| R7×28×D14×100L | 14 | 14 | 28 | 7 | 100 |
| R7×28×D14×150L | 14 | 14 | 28 | 7 | 150 |
| R8×32×D16×100L | 16 | 16 | 32 | 8 | 100 |
| R8×32×D16×150L | 16 | 16 | 32 | 8 | 150 |
| R9×36×D18×100L | 18 | 18 | 36 | 9 | 100 |
| R9×36×D18×150L | 18 | 18 | 36 | 9 | 150 |
| R10×40×D20×100L | 20 | 20 | 40 | 10 | 100 |
| R10×40×D20×150L | 20 | 20 | 40 | 10 | 150 |
Hinweis zur Größe: Reference sizes only. Confirm dimensions and series availability before ordering.
Start der Schnittdaten
Reference starting ranges only. Adjust to tool size, hardness and machining conditions.
| WORKPIECE | VC (m/min) | FZ (mm/tooth) | AP | AE | ANWENDUNG |
|---|---|---|---|---|---|
| Steel / Alloy Steel HRC45–HRC50 | 120-180 | 0.03–0.06 | 0.3–0.6 × D | 0.05–0.20 × D | Contouring / Semi-Finishing |
| Hardened Steel HRC55–HRC65 | 80–120 | 0.015–0.03 | 0.2–0.4 × D | 0.03–0.15 × D | Light Semi-Finishing / Finishing |
Cutting Note: Starting values only; verify diameter-specific parameters and reduce cutting loads for small or extended-reach tools.
Need Help Selecting an HRC45–HRC65 Ball Nose End Mill?
Send your steel grade, hardness, required sizes and quantity for series selection and quotation.
Kundenspezifische Anpassungen & OEM
Für Händler- und OEM-Programme stehen kundenspezifische Abmessungen, Geometrien und Private-Label-Optionen zur Verfügung.


Drawing- and sample-based development is also available for special aluminum finishing applications.
Qualität, Prüfung und Lieferung
Our HRC45-HRC65 Solid Carbide Ball Nose End Mill are controlled through material verification, precision grinding, in-process measurement and final inspection. See our manufacturing and quality control process for more information.
Tool inspection in practice — checking key dimensions, profile and cutting-edge condition before packing.
Three-Stage Quality Control
Inspection checkpoints support dimensional consistency and repeat-order control.
Incoming Material Control
Carbide grade and blank dimensions are checked before production.
In-Process Grinding Control
Key dimensions and flute geometry are checked during CNC grinding.
Final Tool Inspection
Finished tools are checked for dimensions, runout, cutting edges and identification.
Verpackung und Versand
Protective and export packing options are arranged according to order quantity and shipment requirements.
Schutzverpackung
Bulk & Export Packaging
HRC45–HRC65 Ball Nose End Mill FAQs
Common questions about hardness selection, 2-flute geometry, mold finishing and carbide ball nose end mill sizes.
What is the difference between HRC45, HRC55, HRC60 and HRC65 ball nose end mills?
Can HRC65 ball nose end mills machine hardened mold steel?
What is a 2-flute carbide ball nose end mill used for?
Should I choose a 2-flute or 4-flute ball nose end mill for steel?
How do I choose the correct ball nose end mill radius?
Which coating is suitable for hardened-steel ball nose milling?
Sizes & Ordering FAQs
Size selection, mixed-size orders, OEM options and quotation requirements.
What standard ball nose end mill sizes are available?
Can I order mixed sizes and different HRC series together?
Are custom ball nose end mills and OEM packaging available?
What information is needed to quote HRC45–HRC65 ball nose end mills?
Technische Downloads
Catalog and reference cutting data for carbide end mill selection.
Katalog für Vollhartmetall-Schaftfräser
Review related carbide end mill series.
Leitfaden zu Drehzahlen und Vorschüben bei Schaftfräsern
Reference starting cutting parameters.
Benötigen Sie Informationen zu Größen, Preisen oder individuellen Optionen?
Senden Sie uns Ihre Spezifikationen und die gewünschte Menge, damit wir Ihnen ein Angebot unterbreiten können.
- Standardgrößen
- Kleine Probestellungen
- Verschiedene Größen
- OEM & Sonderanfertigungen
QR-Code anzeigen – Vertrieb über WeChat kontaktieren
Scannen Sie den QR-Code, um uns über WeChat zu kontaktieren.
Scannen Sie den QR-Code, um uns über WeChat zu kontaktieren.

























