Pah Çekme ve Çapak Alma İşlemleri için 90° Düz Oluklu Katı Karbür Pah Frezi

This 90° straight-flute carbide chamfer mill provides CNC chamfering and deburring for steel, stainless steel, alloy steel and cast iron.

Product Configurations

Pah Açısı:
90°
Kesme Çapı:
Ø1–Ø20 mm
Flüt sayısı:
2F / 3F by Size
Tool Material:
Katı Karbür
Workpiece Materials:
Steel / Stainless Steel / Alloy Steel / Cast Iron
Uygulamalar:
Edge Chamfering / Hole Chamfering / Deburring
Fiyat Teklifi Alın WhatsApp'ta Sohbet Et
EN İYİ İÇİN

90° Chamfer

Hassas Pah Kırma

Straight-Flute Design

Kararlı Kesim

Katı Karbür

High Wear Resistance

2F / 3F Options

Flexible Size Selection

90° Straight-Flute Carbide Chamfer Mill

Bu 90° straight-flute solid carbide chamfer mill şunlar için tasarlanmıştır: 45° edge chamfering, hole-mouth chamfering and deburring. Şu dillerde mevcuttur: 2- and 3-flute configurations, with standard and extended lengths to suit different access requirements.

Başlıca Uygulamalar

Kenar Yiv Açma

45° edge chamfers using a 90° cutter.

Hole Chamfering

Controlled chamfers around machined holes.

CNC Deburring

Burr removal from edges and hole entrances.

İş Parçası Malzemeleri

Stainless Steel · Steel · Alloy Steel · Cast Iron

Temel Özellikler

90° Chamfer Geometry

Consistent Edge Chamfers

Straight-Flute Design

Controlled Edge Cutting

Solid Carbide Body

Rigidity & Wear Resistance

2- & 3-Flute Options

Size-Matched Configurations

Mevcut Yapılandırmalar

The HY-155 series covers Ø1–Ø20 mm reference cutting diameters, with 2 flutes for smaller sizes and 3 flutes for larger sizes. Selected diameters are available in 100 mm and 150 mm overall lengths.

Kesim Çapı

Ø1–Ø20 mm

Pah Açısı

90°

Flüt Sayısı

2F / 3F

Toplam Uzunluk

50–150 mm

Sizes and flute counts vary by diameter. See Specifications & Sizes for exact combinations.

Tool Design & Cutting Edge Details

Detailed views of the carbide chamfer mill geometry, cutting edges and flute configurations.

Solid carbide straight-flute chamfer mill design details

Carbide chamfer mill cutting edge detail

Straight-flute chamfer cutter chip evacuation detail

Carbide chamfer end mill surface finish and coating detail

Two-flute carbide chamfer mill cutting geometry

CNC carbide chamfer mill edge finishing application

Ürün Galerisi

Coated solid carbide chamfer mill product view

Straight-flute carbide chamfer mill cutting edge close-up

Three coated solid carbide chamfer cutters

Coated carbide chamfer mills with different cutting angles

90° Chamfer Mill Dimensions & Specifications

HY-155 straight-flute solid carbide chamfer mill for CNC edge chamfering, hole chamfering and deburring. Reference sizes: Ø1–Ø20 mm with 2/3-flute and long-reach options.

90 degree straight flute carbide chamfer mill dimensional drawing

Boyutlar: CD = Cutting Diameter · A = Included Angle · SD = Shank Diameter · F = Flutes · TL = Total Length. All dimensions in mm.

Standard & Long-Reach Chamfer Mill Sizes

HY-155 reference sizes for 90° carbide chamfer cutters, including standard and extended-length configurations. Selected diameters also offer 60°/120° angles.

Scroll to view all 24 reference configurations.

Dizi CD (mm) A Açısı SD (mm) Flütler TL (mm)
HY-155 1.0 90° 4 2F 50
HY-155 1.2 90° 4 2F 50
HY-155 1.5 90° 4 2F 50
HY-155 2.0 90° 4 2F 50
HY-155 2.5 90° 4 2F 50
HY-155 3.0 60° / 90° / 120° 4 3. kat 50
HY-155 4.0 60° / 90° / 120° 4 3. kat 50
HY-155 5.0 60° / 90° / 120° 5 3. kat 50
HY-155 6.0 60° / 90° / 120° 6 3. kat 50
HY-155 8.0 60° / 90° / 120° 8 3. kat 60
HY-155 10.0 60° / 90° / 120° 10 3. kat 75
HY-155 12.0 60° / 90° / 120° 12 3. kat 75
HY-155 14.0 90° 14 3. kat 80
HY-155 16.0 90° 16 3. kat 80
HY-155 20.0 90° 20 3. kat 100
Extended-Length Options — 100 mm
HY-155 4.0 90° 4 3. kat 100
HY-155 6.0 90° 6 3. kat 100
HY-155 8.0 90° 8 3. kat 100
HY-155 10.0 90° 10 3. kat 100
HY-155 12.0 90° 12 3. kat 100
Extended-Length Options — 150 mm
HY-155 8.0 90° 8 3. kat 150
HY-155 10.0 90° 10 3. kat 150
HY-155 12.0 90° 12 3. kat 150

Reference configurations only. Confirm the selected angle, diameter, flute count and overall length before ordering.

Chamfering & Tool Selection Notes

  • Chamfer Size: Control cutting depth to achieve the required edge chamfer.
  • Long-Reach Tools: Minimize overhang and verify toolholding rigidity.
  • Material Matching: Select suitable cutting geometry and coating for steel, stainless steel, alloy steel or cast iron.

90° Carbide Chamfer Mill Customization

Özel cutting diameters, chamfer angles, flute counts, shank sizes, overall lengths, cutting-edge geometry and coatings are available for application-specific requirements.

Kalite, Denetim ve Teslimat

Our solid carbide square end mills undergo material checks, precision grinding and final inspection to ensure consistent dimensions, cutting edges and coating quality.

Katı karbür kare uçlu frezeler için kontrollü üretim ve son kontrol

Ürün ve Uygulama SSS'leri

Common questions about 90° straight-flute carbide chamfer mills for CNC edge chamfering, hole chamfering and deburring.

What is a 90° carbide chamfer mill used for?
A 90° carbide chamfer mill is used for CNC edge chamfering, hole chamfering and deburring on machined components.
What is the difference between straight-flute and spiral-flute chamfer mills?
Straight-flute chamfer mills have axial cutting edges, while spiral-flute cutters use helical edges. Selection depends on material, chip control and machining conditions.
What materials can this carbide chamfer cutter machine?
Suitable applications include steel, stainless steel, alloy steel and cast iron. Cutting geometry, coating and parameters should be matched to the material.
Can this tool chamfer and deburr drilled holes?
Yes. It supports hole-edge chamfering and deburring when tool clearance and hole dimensions are suitable. It is not intended for spot drilling or flat-bottom counterboring.
Does a 90° chamfer mill produce a 45° chamfer?
Yes. A 90° included-angle cutter can produce a 45° edge chamfer with the correct tool orientation and cutting depth.

Boyutlar, Özelleştirme ve OEM ile İlgili Sık Sorulan Sorular

Size selection and ordering information for CNC cutting tool distributors, importers and OEM buyers.

What sizes and flute counts are available?
HY-155 reference sizes cover Ø1–Ø20 mm, with 2-flute and 3-flute designs depending on diameter. See the Specifications & Sizes tab for exact combinations.
Are long-reach chamfer mills available?
Yes. Selected models offer 100 mm and 150 mm overall lengths. Confirm the required diameter and toolholding setup before ordering.
Can chamfer angles and tool dimensions be customized?
Evet. Custom chamfer angles, cutting diameters, flute counts, shank sizes, lengths and coatings can be reviewed. Selected standard sizes also offer 60° and 120° angles.
Do you support private labels and mixed-size orders?
Evet. OEM marking, private-label packaging and mixed-size orders can be arranged according to specifications and quantities.
Fiyat teklifi için hangi bilgiler gereklidir?
Şunu sağlayın: cutting diameter, chamfer angle, shank size, overall length, workpiece material and quantity. Include drawings for custom requirements.

Ölçüler, fiyatlar veya özel seçenekler mi arıyorsunuz?

Fiyat teklifi almak için teknik özelliklerinizi ve miktarınızı gönderin.

  • Standart Boyutlar
  • Küçük Ölçekli Dava Kararları
  • Çeşitli Bedenler
  • OEM ve Özel Üretim
QR Kodunu Görüntüle – WeChat üzerinden Satış Departmanı ile İletişime Geçin
HY Kesici Aletler WeChat QR Kodu

WeChat üzerinden bizimle iletişime geçmek için bu kodu tarayın.

HY Ürün Sorgulama

WeChat

HY Kesici Aletler WeChat QR Kodu

WeChat üzerinden bizimle iletişime geçmek için bu kodu tarayın.

İlgili Ürünler