HSS Thread Forming Taps M1–M12 for Chipless Tapping
HSS thread forming taps for chipless metric threading in ductile metals, with 18 listed M1–M12 sizes and custom/OEM options.
Dimensions and pitch combinations vary by size.
Chipless Forming
M1–M12 Sizes
HSS Construction
Custom & OEM
Metric Threading · Chipless Forming
HSS Thread Forming Taps M1–M12
Application test: M10×1.5 thread forming in 45 steel.
HSS thread forming taps, also called roll form taps, produce metric internal threads by displacing ductile metal without generating cutting chips.
The M1–M12 range supports miniature threaded features and general CNC tapping, with size selection based on pitch, thread depth and material compatibility.
Size and pitch combinations follow the specification table; the range does not include every possible combination.
Chipless Tapping for Metric Threads
01
No Cutting Chips
Thread forming avoids tapping-chip accumulation inside the hole.
02
Small Metric Sizes
Listed models start at M1×0.25 for miniature internal threads.
03
Holder Compatibility
Straight shanks and square drives support suitable tap holders.
04
Defined Dimensions
Thread length, shank and overall length are listed for size selection.
Where Roll Form Taps Fit
おすすめ
- Metric threads in sufficiently ductile metals.
- Housings, fittings, brackets and precision components.
- CNC production where tapping chips are undesirable.
Not Ideal For
- Brittle or insufficiently ductile materials.
- Uncontrolled pre-hole sizes or inadequate lubrication.
- Setups without suitable torque capacity and feed control.
Blind-hole and through-hole suitability depends on forming chamfer, full-thread depth and available clearance.
Workpiece Material Compatibility
Select metric forming taps by alloy grade, ductility and hardness, rather than material name alone.
Aluminum & Copper Alloys
Review alloy ductility and lubrication for forming suitability.
Ductile Steel Grades
Confirm hardness, forming torque and the selected tap configuration.
Selected Stainless Steels
Application review is required for grade, coating and lubrication.
Before Selecting a Forming Tap
- Confirm thread size, pitch, tolerance and required full-thread depth.
- Use the recommended forming-tap pre-hole diameter and tolerance.
- Match the chamfer, shank and bottom clearance to the hole and holder.
- Confirm material-compatible lubrication, torque capacity and feed synchronization.
Pre-hole selection: Do not reuse a cutting-tap drill size without verification. The pre-hole directly affects thread formation and tapping load.
Application Reference
M10×1.5 Thread Forming in 45 Steel
The supplied 14-hole test reports clean formed threads with acceptable GO/NO-GO gauge results.
Pre-hole: Ø9.3 mm
Speed: 100 rpm
Feed: 150 mm/min
Test: 14 holes
Reference conditions for this test only; they do not establish universal cutting data or tool life. Select lubrication for the actual material and process.
HSS Forming Tap Design Details


Product Photos & Configurations
Confirm the HSS grade, surface treatment and dimensional configuration for the selected size before ordering.





Related Threading Tools
Solid Carbide Thread Forming Taps
— alternative substrate for application-specific forming requirements.
HSS Spiral Flute Taps M3–M12
— chip-cutting options for suitable blind-hole applications.
HSS Thread Forming Tap Sizes & Specifications
Choose from 18 metric forming tap sizes, M1×0.25 to M12×1.75. Match thread size, pitch, shank and required full-thread depth.
d = nominal thread diameter · l = thread length · L = overall length · D = shank diameter.
Dimensions & Size Reference
Metric Forming Tap Size Chart
All dimensions are in mm. Scroll to view all sizes.
| Thread Size × Pitch | Thread Length l | Overall Length L | Shank Diameter D |
|---|---|---|---|
| M1 × 0.25 | 4 | 32 | 3 |
| M1.2 × 0.25 | 4 | 34 | 3 |
| M1.4 × 0.3 | 5 | 36 | 3 |
| M1.6 × 0.35 | 6.5 | 37 | 3 |
| M1.7 × 0.35 | 6.5 | 37 | 3 |
| M1.8 × 0.35 | 6.5 | 37 | 3 |
| M2 × 0.4 | 11 | 40 | 3 |
| M2.3 × 0.4 | 11 | 44 | 3 |
| M2.5 × 0.45 | 15 | 44 | 3 |
| M2.6 × 0.45 | 15 | 44 | 3 |
| M3 × 0.5 | 18 | 46 | 4 |
| M3.5 × 0.6 | 18 | 48 | 4 |
| M4 × 0.7 | 20 | 52 | 5 |
| M5 × 0.8 | 22 | 60 | 5.5 |
| M6 × 1.0 | 24 | 62 | 6 |
| M8 × 1.25 | 18 | 70 | 6.2 |
| M10 × 1.5 | 20 | 75 | 7 |
| M12 × 1.75 | 25 | 82 | 8.5 |
Thread length l is a tool dimension, not usable full-thread depth. Allow for the forming chamfer and bottom clearance.
サイズ、価格、またはカスタマイズオプションについてお知りになりたいですか?
Send thread size, pitch, full-thread depth, material and quantity. Include tolerance, coating or private-label requirements.
Technical Configuration
Tap Type & Drive
Right-hand metric roll form tap; straight shank with square drive.
Material & Coating
HSS construction. HSS-E and coating requests require size and application confirmation.
Thread Tolerance
Specify the finished-thread tolerance for tap specification review.
Forming Tap Selection Checks
- 素材: Confirm alloy grade, hardness and sufficient ductility.
- Pre-hole: Use the forming-tap hole diameter and tolerance; cutting-tap drill sizes are not interchangeable.
- Hole & setup: Check full-thread depth, chamfer clearance, holder fit, feed synchronization and lubrication.
- First piece: Verify thread fit and formed minor diameter before batch production.
Pre-hole sizes and operating speeds are application-specific and are not included in this dimensional table.
HSS Forming Tap Customization
Custom metric forming taps can be reviewed for thread specifications, working geometry and holder compatibility.
- Threads: Diameter, pitch, direction and tap limits.
- 幾何学: Forming profile, chamfer and lubrication grooves where required.
- 寸法: Thread length, reach, overall length, shank and square drive.
- Material & coating: HSS grade and surface treatment matched to the application.
Feasibility, MOQ and lead time are confirmed by size and design.
OEM & Private Label
Laser logos, model identification, branded labels and protective packaging support distributor orders.
Marking depends on shank space; packaging follows approved artwork.
HSS Forming Tap Quality Control
Material, forming profile and dimensions are checked against confirmed specifications for repeat supply.
- 素材: HSSグレードおよび合意された硬度。.
- 幾何学: Pitch, tap limits, forming lobes and chamfer.
- 寸法: Thread length, shank, square drive and runout.
- 最終確認: Surface, coating, marking and labels.
検査報告書およびサンプルの検証結果は、注文時に確認されます。. 品質プロセスを表示 →
包装および識別
Individual protection and size labels support safe handling and clear stock identification.

Lead Time & Shipping
Standard: Typically 1–3 working days, subject to stock.
Custom: Confirmed by specification, coating and quantity.
Packing, freight and payment terms are confirmed by order and destination.

HSS Thread Forming Tap FAQs
What is the difference between a forming tap and a cutting tap?
Are roll taps, form taps and fluteless taps the same?
Which metric forming tap sizes are available?
Can HSS forming taps be used in aluminum, steel or stainless steel?
What drill size should I use for a forming tap?
Can forming taps machine blind and through holes?
What should I check if forming torque is high or the tap breaks?
Ordering & OEM Support
Are custom forming taps and private-label options available?
Can I order samples or mixed metric sizes?
What information is needed for pricing and delivery?
Catalog & Technical Resources
General series reference. Use this page’s size table for the M1–M12 product dimensions.
HSS Speeds & Feeds Guide (PDF)
General guidance; confirm forming-specific speed, pre-hole size and lubrication separately.
サイズ、価格、またはカスタマイズオプションについてお知りになりたいですか?
Send your specifications and quantity for a quote.
- Standard Sizes
- Small Trial Orders
- Mixed Sizes
- OEM & Custom
View QR Code – Contact Sales on WeChat
Scan to contact us on WeChat.
Scan to contact us on WeChat.




















