Machos de roscar HSS-Co M35 con punta helicoidal para acero inoxidable
M35 cobalt spiral point taps (gun taps) for stainless steel through-hole threading, with forward chip evacuation and custom/OEM options.
M35 HSS de cobalto
Stainless Tapping
Forward Chip Flow
Servicio OEM
M35 Cobalt Spiral Point Taps for Stainless Steel Through Holes
M35 cobalt spiral point machine taps, también conocido como cobalt gun taps, cut metric internal threads in stainless steel through holes. The spiral point directs chips forward through the open hole. Standard models cover M2–M20, with custom dimensions and OEM options available.
HSS-Co Machine Tap Features
M35 HSS de cobalto
Cobalt-alloyed high-speed steel supports hot hardness and edge retention during stainless steel tapping.
Forward Chip Evacuation
The spiral point pushes chips ahead of the cutting zone into the available exit space.
Metric Right-Hand Threads
Listed size-and-pitch combinations range from M2 × 0.4 to M20 × 2.5.




Stainless Steel Through-Hole Tapping Applications
These metric gun taps suit CNC and production tapping where chips can exit beyond the workpiece. Typical components include:
- Stainless steel plates and mounting brackets.
- Housings and general engineering components with through threads.
- Fabricated parts and industrial equipment components.
Lo mejor para: Stainless steel through-hole threading with adequate tap and chip exit clearance.
No es ideal para: Blind holes or setups where forward-moving chips cannot clear the workpiece.
M35 Spiral Point Tap Construction & Details



Selección del material de la pieza de trabajo
Stainless steel is the primary target material. Carbon and alloy steel applications can also be reviewed against the exact grade, hardness and tapping conditions. For 304 or 316 stainless steel, confirm material condition, geometry and lubrication before selecting cutting data.

Material reference; suitability depends on the selected tap and workpiece condition.
Selecting a Metric Spiral Point Tap
- Hilo: Match diameter, pitch and required tolerance.
- Descuento: Allow exit space for the chamfer and forward-directed chips.
- Holder fit: Check shank, drive square and working reach.
- Aplicación: Confirm material, pilot hole, lubrication and synchronized tapping settings.

M35 Cobalt Machine Tap Photos



M35 Cobalt Spiral Point Tap Sizes & Specifications
Dimensiones de referencia para M35 HSS-Co spiral point machine taps, also known as cobalt gun taps. The listed range includes 13 metric sizes from M2 × 0.4 to M20 × 2.5 for stainless steel through-hole threading. All dimensions are in millimeters.
M2–M20 Metric Gun Tap Dimensions
| Tamaño de la rosca | Working Length | Tono | Longitud total |
|---|---|---|---|
| M2 × 0,4 | 10.5 | 0.40 | 43.0 |
| M2,5 × 0,45 | 12.0 | 0.45 | 46.0 |
| M3 × 0,5 | 12.5 | 0.50 | 50.9 |
| M4 × 0,7 | 14.0 | 0.70 | 57.3 |
| M5 × 0,8 | 19.0 | 0.80 | 64.2 |
| M6 × 1,0 | 21.0 | 1.00 | 66.0 |
| M8 × 1,25 | 21.0 | 1.25 | 70.2 |
| M10 × 1,5 | 22.5 | 1.50 | 75.3 |
| M12 × 1,75 | 29.0 | 1.75 | 82.4 |
| M14 × 2,0 | 30.0 | 2.00 | 93.0 |
| M16 × 2,0 | 32.0 | 2.00 | 102.0 |
| M18 × 2,5 | 37.0 | 2.50 | 111.0 |
| M20 × 2,5 | 37.0 | 2.50 | 111.0 |
Working length is a tool dimension, not guaranteed full-thread depth. Allow exit clearance for the tap chamfer and forward-directed chips.
¿Necesita medidas, precios u opciones a medida?
Send your metric thread size, stainless steel grade, workpiece thickness and quantity for size confirmation and quotation.
Stainless Steel Through-Hole Tap Selection
- Especificaciones del hilo: Match diameter, pitch and required thread tolerance.
- Exit clearance: Check workpiece thickness and space beyond the hole for the tap lead and chips.
- Holder fit: Confirm shank, drive square, overall length and required reach.
- Material: Specify stainless steel grade and hardness for geometry, coating and cutting-data review.
Confirm tap limits, chamfer, coating and manufacturing standard when ordering. The listed HRC60 value refers to tool hardness, not maximum workpiece hardness.
M35 Spiral Point Tap Speeds & Feeds
Select stainless steel tapping speeds by material grade, hardness, tap diameter, coating and lubrication. The general HSS chart below covers M2–M12; it does not provide M35-specific settings or values for M14–M20.

Custom M35 Cobalt Spiral Point Taps
Custom HSS-Co machine taps can be reviewed for stainless steel through-hole threading, based on your drawing and application.
- Threads: Special diameters, pitches and specified tap limits.
- Geometría: Spiral point, chamfer and cutting-edge preparation.
- Dimensiones: Working length, overall length, shank and drive square.
- Superficie: Uncoated or application-matched coating options.
Las especificaciones, la cantidad mínima de pedido y el plazo de entrega se confirman junto con el presupuesto.
Grifos para máquinas de fabricantes de equipos originales (OEM) y de marca blanca
Distributor orders can include logo marking, model codes, product labels and branded protective packaging.
El marcado depende del espacio disponible en el vástago; el embalaje se realiza según las maquetas aprobadas.
Para solicitar un presupuesto: Specify thread size and pitch, tolerance, stainless steel grade, hardness, workpiece thickness and quantity. Include drawings and OEM requirements where applicable.
M35 Spiral Point Tap Quality & Inspection
M35 cobalt HSS, thread geometry and tool dimensions are checked against confirmed specifications for repeat supply.

Puntos clave de la inspección
- Material: M35 grade and agreed hardness requirements.
- Hilo: Diameter, pitch, profile and specified tap limits.
- Geometría: Spiral point, chamfer, cutting edges and specified runout.
- Dimensiones: Working length, overall length, shank and drive square.
Los informes requeridos y la validación de la muestra se acuerdan antes de realizar el pedido.
Envasado e identificación
Individual protection helps prevent thread and edge damage. Labels identify tap size and order or batch references.

Plazo de entrega y envío para exportación
Grifos estándar: Normalmente, de 1 a 3 días laborables, siempre que haya existencias.
Grifos a medida: El plazo de entrega depende de las especificaciones, el recubrimiento y la cantidad.
Las condiciones de embalaje para la exportación, envío y pago se confirman al realizar el pedido.


M35 Cobalt Spiral Point Tap FAQs
Are M35 cobalt gun taps suitable for stainless steel through holes?
Should I choose spiral point or spiral flute taps for stainless steel?
Why choose M35 HSS-Co machine taps for stainless steel?
Can these spiral point taps be used for 304 or 316 stainless steel?
Which M2–M20 metric spiral point tap sizes are listed?
How do I select tap-drill size and exit clearance for through-hole tapping?
What speed and feed should I use for M35 taps in stainless steel?
The listed HRC60 value refers to tool hardness, not maximum workpiece hardness.
Custom Taps & Distributor Supply
Can you supply custom M35 spiral point taps with OEM branding?
Are sample and mixed-size cobalt tap orders available?
What information is needed for wholesale pricing and size confirmation?
Acceder a los recursos de catálogo y selección
¿Necesita medidas, precios u opciones a medida?
Envíanos tus especificaciones y la cantidad para que te enviemos un presupuesto.
- Tallas estándar
- Pedidos de prueba de pequeño volumen
- Tallas variadas
- OEM y herramientas personalizadas
Ver código QR – Ponte en contacto con el departamento de ventas a través de WeChat
Escanea el código para contactar con nosotros en WeChat.
Escanea el código para contactar con nosotros en WeChat.













