Custom PCD Form Cutter for Aluminum: Customer Case
Customer case · PCD tooling · Aluminum machining
This custom PCD form cutter was made for aluminum machining, with two profiled cutting edges and a YG8 carbide body. Its drawing specifies a Ø19 mm head, Ø16 mm shank and 105 mm overall length.
Several radii and an angled section define the cutting profile. For a buyer comparing a replacement, their positions along the tool matter as much as the main diameters.
Case at a Glance
Drawing-based tooling
Tool construction
Two cutting edges · PCD tips · YG8 carbide body
Workpiece material
Aluminum alloy, as specified on the drawing.
Main dimensions
Ø19 mm head · Ø16 mm shank
105 mm overall length
Explore This Case
See the Physical Tool
Review the cutting section
A View of the Finished Cutter
- Combined profile
The curved and angled sections come into view as the cutter turns.
- Two-edge layout
Different views show the profiled cutting edges and how they sit on the body.
- Shank and cutting section
Their relationship is useful when comparing the tool with the access available in your setup.
Workshop video of the finished cutter. No cutting trial is shown.
Review the Custom PCD Form Cutter Drawing
The drawing provides the dimensions behind the tool shown in the video. Three details are especially useful when comparing a similar cutter:

Read the drawing
Reading This Profile
Radius and position work together
R4 and R8 describe different parts of the contour. Their axial positions also matter: retaining a radius but moving it changes the profile.
Tool dimensions and part requirements
Ø19 mm is the tool head diameter; Ø16 mm is the shank diameter. The required part dimensions and tolerances need to be specified separately. A local tool tolerance is not an accuracy rating for the whole part.
Overall length and usable reach
The 105 mm dimension is overall length; >45 mm identifies the PCD-tip effective length. Usable reach also depends on clamping length, holder position and clearance around the feature.
Related product
PCD Combination End Mill
Explore milling and chamfering options for non-ferrous parts.
Drawing-based tooling
Have a Similar Profile?
Send your drawing, sample details or marked sketch for review.
Ordering a Replacement or a Modified Cutter
An old cutter, a new reach requirement and an out-of-tolerance part each call for a different starting reference.
- Replacing a worn cutterAn existing cutter and a marked part drawing let us compare the intended contour with the worn area. An unworn reference is useful when available.
- Increasing the working reachA section view should show the entrance, target feature and any obstruction, together with the holder position. Increasing overall length alone does not confirm that the tool will clear the part.
- The part is out of toleranceThe failed measurement and a photo of the affected feature are the starting point. Add the current tool and machining setup so both the cutter and the process can be checked.
See our custom form cutter capabilities for other drawing-based profiles.
What to Send for a Similar Cutter
For an end-customer enquiry, start with the relevant part section, tool reference and quantity. The following details help us assess a similar cutter:
- Drawing or sampleCurrent drawing revision, marked photo or existing cutter; identify any worn area.
- Critical featuresRequired diameters, radii, axial positions, tolerances and surface finish. Include any specified inspection method.
- Material and setupAluminum grade, operation, allowance and access restrictions. Add holder and coolant details if available.
- Quantity and purposeTrial quantity and any known repeat demand. Explain whether this is a replacement or a design change.
You do not need every detail to start. Send what you have, and we can clarify the missing information before confirming the final specification.
Buyer Questions
Can you make a replacement if I only have the old tool?
Yes. Send us the existing cutter or a physical sample. We can check the key dimensions and geometry, confirm the requirements with you and prepare a custom sample for evaluation.
Can you change the reach or profile of an existing design?
Yes. Tell us what needs to change and send the existing drawing or tool reference. We can review the reach, profile and other dimensions against the new application.
Can you hold the tolerances on my drawing?
Send us the drawing and mark the critical tolerances. We’ll check what is achievable for the tool’s size and geometry before confirming the specification.
Can I order a small trial batch before a larger order?
Yes, small trial orders are possible for many custom tools. Send us the drawing and trial quantity, and we’ll confirm the MOQ for that design.
Can the tool be adjusted after the first trial?
Yes. Share the results from the first trial so we can review the dimensions, geometry or cutting performance before the next batch.
Will you keep my drawing confidential?
Yes. We keep customer drawings and specifications confidential and use them for quotation, production and quality review. Let us know if you have any additional confidentiality requirements.
Further reading
Related Guides
Custom Cutting Tools Made to Drawing →
See what to include in a drawing-based RFQ.
Small-Batch Custom Cutting Tools →
Plan a trial before ordering a larger batch.
Talk through your requirement
Need a PCD Form Cutter for Your Aluminum Part?
Send your drawing or existing tool reference, workpiece material and quantity. Mark the profile details you need us to review.
