{"id":1497,"date":"2025-12-26T05:14:35","date_gmt":"2025-12-26T05:14:35","guid":{"rendered":"https:\/\/hycuttingtools.com\/?post_type=product&p=1497"},"modified":"2026-09-29T11:02:36","modified_gmt":"2026-09-29T11:02:36","slug":"apmt-1135-1604-r08-milling-inserts","status":"publish","type":"product","link":"https:\/\/hycuttingtools.com\/tr\/urun\/apmt-1135-1604-r08-milling-inserts\/","title":{"rendered":"APMT 1135\/APMT 1604 R0.8 Carbide Milling Inserts"},"content":{"rendered":"
\n

<\/p>\n

\n
\n

\u25c6<\/span>\u00dcr\u00fcne Genel Bak\u0131\u015f<\/h2>\n
<\/div>\n<\/div>\n

APMT 1135 and APMT 1604 R0.8 are indexable carbide milling inserts for use in compatible shoulder and face milling cutters. Both sizes have a nominal 0.8 mm corner radius in the supplied series chart. Choose the size to match the cutter pocket, then specify the complete geometry, carbide grade and coating for the workpiece and operation.<\/p>\n

The original product description presents a coated, precision-ground carbide range. The exact substrate grain size, PVD coating system, edge preparation and application limits should be confirmed by full item code; a shared APMT designation does not establish identical performance across variants.<\/p>\n<\/section>\n

<\/p>\n

\n
\n

\u25c6<\/span>Key Configuration<\/h2>\n
<\/div>\n<\/div>\n
\n
\n

Two Insert Sizes<\/h3>\n

The chart lists 1135 at l 11 \u00d7 d 6.35 \u00d7 t 3.5 mm and 1604 at l 16.5 \u00d7 d 9.525 \u00d7 t 4.76 mm. They require the corresponding cutter pocket.<\/p>\n<\/div>\n

\n

R0.8 Corner<\/h3>\n

The listed 0.8 mm corner radius provides a defined corner geometry. Finish, cutting force and edge durability still depend on the full insert geometry and cutting conditions.<\/p>\n<\/div>\n

\n

Grade & Chip Control<\/h3>\n

The chart names H2, M2 and PM variants. Confirm what each suffix means for the selected supplier, along with the carbide grade, coating and chipbreaker.<\/p>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n
\n

\u25c6<\/span>Applications & Selection<\/h2>\n
<\/div>\n<\/div>\n

Specify the workpiece grade and hardness when selecting an insert for carbon or alloy steel, stainless steel or cast iron. Select a supplier-defined grade and geometry for that material. Face and shoulder milling are typical with a compatible cutter; slotting, ramping, profiling and interrupted cutting require the cutter manufacturer’s stated limits.<\/p>\n

Fit check:<\/strong> APMT 1135 and 1604 are different sizes and are not interchangeable by title alone. Confirm cutter-body code, pocket, fixing screw, insert hand, corner radius and maximum depth of cut before ordering.<\/div>\n<\/section>\n

<\/p>\n

\n
\n

\u25c6<\/span>Product Images<\/h2>\n
<\/div>\n<\/div>\n
\"APMT