M3–M12 Solid Carbide Step Drill for Fastener & Counterbore Holes
Two Diameters
One Operation
Aligned Steps
Precise Positioning
M3–M12 Sizes
Fastener Holes
Custom Geometry
OEM Options
M3–M12 Solid Carbide Step Drill for Fastener & Counterbore Holes
This solid carbide straight-shank step drill combines two cutting diameters to produce aligned clearance holes and counterbores in one machining operation. M3–M12 reference sizes support fastener-hole applications, with custom diameters, step depths and coatings available for drawing-based requirements.

Two Diameters in One Tool
The smaller diameter forms the lower hole, while the larger cutting section creates the stepped recess. Their integrated geometry helps reduce tool changes and separate positioning operations.
M3–M12
d1 + d2
Solid Carbide
Straight Shank
Two-Diameter Step Drill Geometry
A single carbide body combines the two cutting diameters and their step relationship for precision two-level hole drilling.

Small Diameter — d1
Forms the lower pilot or fastener-clearance hole.
Large Diameter — d2
Creates the upper counterbore or stepped recess.
Integrated Step Geometry
Both cutting sections share one tool axis, supporting consistent alignment and fewer tool changes.
One Tool, Two Diameters
Combines drilling and counterboring in one operation.
Aligned Steps
Reduces separate setup and positioning steps.
M3–M12 Reference Sizes
Two-diameter options for common fastener holes.
Solid Carbide Step Drill Video & Details
Solid Carbide Step Drill — Video Reference


Coated and uncoated configurations are selected according to material, hardness and machining requirements.Fastener & Counterbore Hole Applications
M3–M12 carbide step drills are intended for two-level mounting holes in CNC-machined components, where the selected diameters and shoulder geometry match the drawing.
おすすめ
- Two-level fastener mounting holes
- Clearance holes with counterbores
- Machine frames and fixtures
- Mounting plates and housings
Application Considerations
- Confirm both hole diameters
- Check step depth and shoulder profile
- Maintain low runout and chip evacuation
- Review tight final-hole tolerances separately
For closely controlled finished bores, see our Solid Carbide Reamer for H7 Holes.
M3–M12 Standard Sizes & Custom Step Drills

Standard & Drawing-Based Options
Select from the M3–M12 reference dimensions when the cutting diameters and step lengths match your application.
Custom d1/d2 combinations, step depths, shoulder forms, shank dimensions and coating options can be reviewed against your drawing.
M3–M12 Carbide Step Drill Specifications
Solid carbide straight-shank step drills with two cutting diameters for aligned fastener holes and counterboring. Standard reference sizes cover M3–M12, with custom configurations available.
Step Drill Dimensions
d1 Small Diameter · d2 Large Diameter · L Overall Length · l Flute Length · l1 Small-Diameter Length
M3–M12 Step Drill Reference Sizes
Reference dimensions for two-diameter carbide step drills. All dimensions are in millimeters.
| Size | d1 (mm) | d2 (mm) | L (mm) | l (mm) | l1 (mm) |
|---|---|---|---|---|---|
| M3 | 3.4 | 6.5 | 65 | 35 | 13 |
| M4 | 4.5 | 8.0 | 75 | 42 | 18 |
| M5 | 5.5 | 9.5 | 85 | 50 | 22 |
| M6 | 6.6 | 11.0 | 90 | 53 | 25 |
| M8 | 9.0 | 14.0 | 95 | 53 | 28 |
| M10 | 11.0 | 17.5 | 105 | 63 | 30 |
| M12 | 14.0 | 20.0 | 110 | 68 | 32 |
Selection Note: Confirm d1, d2, step depth, shoulder geometry, shank size and required tolerances against the component drawing. These reference dimensions do not define all manufacturing tolerances.
Step Drill Selection & Cutting Data
Select the step drill according to the fastener-hole profile, two cutting diameters, workpiece material and machining conditions.
- Hole Geometry: Confirm d1, d2, step depth and shoulder profile.
- Custom Options: Specify non-standard diameters, lengths, tolerances and coating requirements.
- Machining Setup: Control runout, chip evacuation and cutting load when the larger step engages
Custom Flat-Bottom Step Drills
Custom pilot and step diameters, depths, flat shoulders and corner forms for aluminum stepped holes. Lengths, shank dimensions, tolerances and DLC or alternative surface options are reviewed against your drawing.
Custom Geometry & Edge Preparation
Dimensions & Reach Options
For quotation: Send the hole drawing, aluminum grade, tolerances, coolant method and quantity.
OEM & Private Label
Logo and tool-code marking, branded labels and protective packaging for distributors and tooling brands. Trial quantities, MOQ and repeat supply are confirmed by specification.
Step Drill Quality Inspection
Inspection focuses on both cutting diameters, step geometry, cutting edges and coating condition for consistent two-level hole machining.
d1, d2, step length and shoulder profile.
Edge condition, grinding quality and runout.
Surface condition, marking and order details.
Inspection criteria and tolerances are confirmed against the approved specification or drawing.
View Manufacturing & QualityProtective Packaging
Individual tool protection, batch identification and secure export packing.

Individual Protection

Batch Identification

Export Packaging
Custom labels and private-label packaging are available for OEM orders.
Lead Time & Shipping
Lead Time: Confirmed according to stock availability, dimensions, coating and quantity.
Shipping: Express, air freight, sea freight or customer-nominated forwarder.
View Buyer & Reseller Resources
M3–M12 Solid Carbide Step Drill FAQs
Common questions about two-diameter drilling, fastener holes, counterbore geometry and M3–M12 size selection.
What is an M3–M12 solid carbide step drill used for?
This two-diameter carbide step drill produces clearance holes and larger counterbores for fastener mounting. M3–M12 reference sizes support machining of stepped holes in fixtures, mounting plates and CNC components.
Can a step drill produce two hole diameters in one operation?
Yes. The integrated d1 and d2 cutting sections can form two related hole diameters in one drilling operation, reducing separate tool changes and helping maintain their alignment.
Does this carbide step drill produce a flat-bottom counterbore?
The counterbore shoulder profile depends on the selected tool geometry. Confirm whether a flat, angled or radiused transition is required before ordering. A flat-bottom shoulder should not be assumed from the M3–M12 size designation alone.
How do I select the correct M3–M12 step drill size?
Match the small diameter d1, large diameter d2 and step length l1 to the component drawing. Check fastener-head clearance, shoulder form and tolerances rather than relying on the M-size label alone.
Which materials and coatings are suitable for carbide step drilling?
Steel and alloy steel are primary applications. TiAlN-coated and uncoated configurations are available for review. Stainless steel, cast iron and non-ferrous materials require suitable geometry and coating selection.
What affects hole accuracy and chip evacuation in step drilling?
Holder runout, workholding, coolant delivery and chip flow affect machining stability. Cutting parameters must also account for the additional load when the larger diameter engages the workpiece.
Step Drill Ordering & OEM FAQs
Information for trial orders, custom step drills, private-label supply and repeat purchasing.
Can you manufacture custom two-diameter step drills from drawings?
Yes. HY supports custom solid carbide step drills with drawing-defined diameters, step depths, shoulder forms, shank dimensions and coatings. Provide the drawing, workpiece material and quantity for review.
Do you accept small trial orders and mixed M3–M12 sizes?
Yes. Trial quantities and mixed-size orders can be arranged according to the selected specifications. MOQ and availability are confirmed before ordering.
Are OEM laser marking and private-label packaging available?
Yes. Custom logos, model markings, specification labels and branded packaging can be arranged according to OEM requirements.
What is the lead time, and can approved designs be reordered?
Lead time depends on availability, geometry, coating and quantity. Approved drawings and specifications can be referenced for consistent repeat orders.
Step Drill Catalog & Cutting Data
Product dimensions and general starting cutting data for carbide step drill selection.
Starting data are general references, not verified cutting parameters for every M3–M12 step configuration.
サイズ、価格、またはカスタマイズオプションについてお知りになりたいですか?
Send your specifications and quantity for a quote.
- Standard Sizes
- Small Trial Orders
- Mixed Sizes
- OEM & Custom
View QR Code – Contact Sales on WeChat
Scan to contact us on WeChat.
Scan to contact us on WeChat.











