{"id":3465,"date":"2026-07-25T12:03:58","date_gmt":"2026-07-25T12:03:58","guid":{"rendered":"https:\/\/hycuttingtools.com\/?post_type=product&p=3465"},"modified":"2026-08-31T15:52:02","modified_gmt":"2026-08-31T15:52:02","slug":"solid-carbide-twist-drill-for-titanium-heat-resistant","status":"publish","type":"product","link":"https:\/\/hycuttingtools.com\/it\/prodotto\/solid-carbide-twist-drill-for-titanium-heat-resistant\/","title":{"rendered":"Solid Carbide Twist Drill for Titanium and Heat-Resistant Superalloys"},"content":{"rendered":"
\n

<\/p>\n

\n

Solid Carbide Twist Drill for Titanium & Heat-Resistant Superalloys Overview<\/h2>\n

This solid carbide twist drill is developed for titanium alloys and heat-resistant superalloys where concentrated cutting heat, material adhesion, work hardening and difficult chip evacuation can reduce drilling stability. Application-specific point geometry, edge preparation and flute design help control thrust, chip formation and cutting-edge loading during precision CNC hole machining. Fine-grain solid carbide, low-friction flute treatment and application-specific surface options support consistent hole quality in demanding ISO S materials. Standard 3\u00d7D, 5\u00d7D and 8\u00d7D configurations are available from \u00d83.0 to \u00d820.0 mm, with through-coolant versions recommended for deeper and more demanding applications.<\/p>\n

\n
Gruppo di materiali<\/span>
\nISO S<\/span><\/div>\n
Depth Series<\/span>
\n3\u00d7D \/ 5\u00d7D \/ 8\u00d7D<\/span><\/div>\n
Gamma di diametri<\/span>
\n\u00d83.0\u201320.0 mm<\/span><\/div>\n
Coolant Option<\/span>
\nExternal \/ Through-Coolant<\/span><\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

Key Configuration<\/h3>\n
\n
\n

ISO S Material Geometry<\/h4>\n

Point geometry, edge preparation and flute design are selected specifically for titanium and heat-resistant alloy drilling.<\/p>\n<\/div>\n

\n

Controlled Cutting Edge<\/h4>\n

A sharp but supported edge condition helps reduce rubbing and axial load while maintaining strength against chipping and rapid wear.<\/p>\n<\/div>\n

\n

Coolant & Chip Control<\/h4>\n

External-coolant and through-coolant configurations can be selected according to drilling depth, chip flow, machine capability and alloy grade.<\/p>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

Key Product Advantages<\/h3>\n
\n
\n

Reduced Rubbing & Heat Concentration<\/h4>\n

Material-specific geometry and controlled edge preparation support a stable cutting action in alloys that are sensitive to heat and work hardening.<\/p>\n<\/div>\n

\n

Low-Friction Chip Evacuation<\/h4>\n

Two spiral flutes and low-friction flute treatment help move difficult chips away from the cutting zone in blind and through holes.<\/p>\n<\/div>\n

\n

Heat & Wear Management<\/h4>\n

Fine-grain carbide, edge preparation, flute treatment and application-specific PVD coating can be combined for concentrated heat and abrasive wear.<\/p>\n<\/div>\n

\n

3D \/ 5D \/ 8D Application Range<\/h4>\n

Three depth series allow the drill configuration to be matched to rigidity, coolant access, chip control and the required hole depth.<\/p>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

Workpiece Material Compatibility<\/h3>\n
\n\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n
ISO CODE<\/th>\nMATERIAL GROUP<\/th>\nREPRESENTATIVE MATERIALS<\/th>\nSUITABILITY<\/th>\n<\/tr>\n<\/thead>\n
S<\/td>\nTitanium Alloys<\/td>\nCP Titanium Grades 1\u20134, Ti-6Al-4V \/ Grade 5, Grade 9<\/td>\n\u25cf Recommended<\/td>\n<\/tr>\n
S<\/td>\nNickel-Based Superalloys<\/td>\nInconel 625, Inconel 718, Hastelloy, Waspaloy<\/td>\n\u25cf Recommended<\/td>\n<\/tr>\n
S<\/td>\nCobalt-Based Superalloys<\/td>\nConfirmed cobalt-based heat-resistant alloy grades<\/td>\n\u25cb Confirm Grade<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
Application Note:<\/strong> Final point geometry, edge preparation, coating, coolant strategy and cutting data should be confirmed according to the exact alloy grade, heat-treatment condition, hole tolerance and production environment.<\/div>\n<\/section>\n

<\/p>\n

\n

Applications & Target Scope<\/h3>\n
    \n
  • Aerospace component drilling<\/li>\n
  • Turbine and engine component machining<\/li>\n
  • Medical implant and precision mechanical parts<\/li>\n
  • Chemical-processing equipment components<\/li>\n
  • Blind-hole and through-hole drilling<\/li>\n
  • Pre-machining holes for reaming or threading<\/li>\n<\/ul>\n<\/section>\n

    <\/p>\n

    \n

    Product & Cutting-Edge Details<\/h3>\n
    \n
    \n
    \"Solid