{"id":8203,"date":"2026-08-28T17:07:19","date_gmt":"2026-08-28T17:07:19","guid":{"rendered":"https:\/\/hycuttingtools.com\/?p=8203"},"modified":"2026-09-26T07:22:41","modified_gmt":"2026-09-26T07:22:41","slug":"solid-carbide-end-mill-series-guide","status":"publish","type":"post","link":"https:\/\/hycuttingtools.com\/it\/solid-carbide-end-mill-series-guide\/","title":{"rendered":"HY Tools Solid Carbide End Mill Series: Quick Selection Guide"},"content":{"rendered":"\n<style>\n\/* ==================================================\n   HY TOOLS END MILL SERIES QUICK SELECTION GUIDE\n   ================================================== *\/\n\n.hy-eq,\n.hy-eq * {\n    box-sizing: border-box;\n}\n\n.hy-eq {\n    width: 100%;\n    margin: 0;\n    padding: 0;\n    overflow-wrap: anywhere;\n    background: #ffffff;\n    color: #5f6772;\n    font-family: Arial, Helvetica, sans-serif;\n}\n\n.hy-eq a {\n    color: #1f43a7;\n    text-decoration: none;\n}\n\n.hy-eq a:hover {\n    color: #17378c;\n}\n\n.hy-eq img {\n    display: block;\n    max-width: 100%;\n    height: auto;\n}\n\n.hy-eq-container {\n    width: 100%;\n    max-width: 1120px;\n    margin: 0 auto;\n    padding: 0 20px;\n}\n\n.hy-eq-reading {\n    width: 100%;\n    max-width: 900px;\n}\n\n.hy-eq-section {\n    padding: 56px 0;\n    scroll-margin-top: 96px;\n}\n\n.hy-eq-soft {\n    background: #f6f8fb;\n}\n\n.hy-eq-blue {\n    background: #f1f6ff;\n}\n\n.hy-eq h2,\n.hy-eq h3,\n.hy-eq p {\n    font-family: Arial, Helvetica, sans-serif;\n}\n\n.hy-eq h2 {\n    margin: 0 0 14px;\n    color: #2f3338;\n    font-size: 28px;\n    line-height: 1.3;\n    font-weight: 700;\n}\n\n.hy-eq h3 {\n    margin: 0 0 8px;\n    color: #333333;\n    font-size: 17px;\n    line-height: 1.45;\n    font-weight: 700;\n}\n\n.hy-eq p {\n    margin: 0;\n    font-size: 15px;\n    line-height: 1.72;\n}\n\n.hy-eq-intro {\n    max-width: 820px;\n    margin-bottom: 28px !important;\n}\n\n.hy-eq-sr-only {\n    position: absolute;\n    width: 1px;\n    height: 1px;\n    padding: 0;\n    margin: -1px;\n    overflow: hidden;\n    clip: rect(0, 0, 0, 0);\n    white-space: nowrap;\n    border: 0;\n}\n\n\/* HERO *\/\n\n.hy-eq-hero {\n    padding: 30px 0 46px;\n}\n\n.hy-eq-kicker {\n    margin-bottom: 10px !important;\n    color: #1f43a7;\n    font-size: 13px !important;\n    line-height: 1.5 !important;\n    font-weight: 700;\n    letter-spacing: .04em;\n    text-transform: uppercase;\n}\n\n.hy-eq-lead {\n    max-width: 850px;\n    color: #4f5660;\n    font-size: 17px !important;\n    line-height: 1.72 !important;\n}\n\n.hy-eq-scope {\n    max-width: 900px;\n    margin-top: 24px;\n    padding: 18px 20px;\n    border-left: 4px solid #1f43a7;\n    background: #f6f8fb;\n}\n\n.hy-eq-scope p {\n    font-size: 14px;\n}\n\n.hy-eq-scope a {\n    display: inline-flex;\n    margin-top: 8px;\n    font-size: 13px;\n    font-weight: 700;\n}\n\n.hy-eq-jump {\n    display: flex;\n    flex-wrap: wrap;\n    gap: 10px 22px;\n    max-width: 900px;\n    margin-top: 26px;\n    padding-top: 18px;\n    border-top: 1px solid #e3e7ed;\n}\n\n.hy-eq-jump a {\n    font-size: 13px;\n    line-height: 1.5;\n    font-weight: 700;\n}\n\n.hy-eq-jump a::after {\n    content: \" \u2193\";\n    font-weight: 400;\n}\n\n\/* STEPS *\/\n\n.hy-eq-steps {\n    display: grid;\n    grid-template-columns: repeat(4, minmax(0, 1fr));\n    gap: 12px;\n    margin: 24px 0 28px;\n}\n\n.hy-eq-step {\n    padding: 17px 16px;\n    border: 1px solid #dfe5ee;\n    background: #ffffff;\n}\n\n.hy-eq-step-no {\n    display: block;\n    margin-bottom: 7px;\n    color: #1f43a7;\n    font-size: 12px;\n    font-weight: 700;\n}\n\n.hy-eq-step strong {\n    display: block;\n    margin-bottom: 4px;\n    color: #333333;\n    font-size: 14px;\n    line-height: 1.45;\n}\n\n.hy-eq-step span {\n    display: block;\n    color: #6f7782;\n    font-size: 12px;\n    line-height: 1.55;\n}\n\n\/* TABLE *\/\n\n.hy-eq-table-wrap {\n    width: 100%;\n    margin-top: 24px;\n    overflow-x: auto;\n    -webkit-overflow-scrolling: touch;\n}\n\n.hy-eq-table {\n    width: 100%;\n    min-width: 900px;\n    border-collapse: collapse;\n    background: #ffffff;\n}\n\n.hy-eq-table th {\n    padding: 14px 15px;\n    border-bottom: 1px solid #d7dee8;\n    background: #edf2f8;\n    color: #333333;\n    font-size: 13px;\n    line-height: 1.45;\n    font-weight: 700;\n    text-align: left;\n    vertical-align: bottom;\n}\n\n.hy-eq-table td {\n    padding: 15px;\n    border-bottom: 1px solid #e4e8ee;\n    color: #5f6772;\n    font-size: 13px;\n    line-height: 1.58;\n    vertical-align: top;\n}\n\n.hy-eq-table td:first-child {\n    color: #333333;\n    font-weight: 700;\n}\n\n.hy-eq-table a {\n    font-weight: 700;\n}\n\n.hy-eq-scroll-hint {\n    display: none;\n    margin-top: 8px !important;\n    color: #7b828c;\n    font-size: 12px !important;\n}\n\n.hy-eq-note {\n    margin-top: 20px;\n    padding: 16px 18px;\n    border: 1px solid #dbe3ef;\n    background: #f8fbff;\n}\n\n.hy-eq-note p {\n    font-size: 14px;\n}\n\n\/* QUICK CTA *\/\n\n.hy-eq-quick-cta {\n    display: grid;\n    grid-template-columns: minmax(0, 1fr) auto;\n    gap: 28px;\n    align-items: center;\n    margin-top: 26px;\n    padding: 22px 24px;\n    background: #1f43a7;\n    color: #ffffff;\n}\n\n.hy-eq-quick-cta strong {\n    display: block;\n    margin-bottom: 4px;\n    font-size: 16px;\n}\n\n.hy-eq-quick-cta p {\n    color: #eaf0ff;\n    font-size: 13px;\n}\n\n.hy-eq-quick-cta a {\n    display: inline-flex;\n    align-items: center;\n    justify-content: center;\n    min-height: 40px;\n    padding: 10px 17px;\n    border: 1px solid #ffffff;\n    border-radius: 4px;\n    color: #ffffff !important;\n    font-size: 13px;\n    font-weight: 700;\n    white-space: nowrap;\n}\n\n.hy-eq-quick-cta a:hover {\n    background: #ffffff;\n    color: #1f43a7 !important;\n}\n\n\/* SERIES *\/\n\n.hy-eq-series-grid {\n    display: grid;\n    grid-template-columns: repeat(2, minmax(0, 1fr));\n    gap: 18px;\n}\n\n.hy-eq-series-card {\n    padding: 24px;\n    border: 1px solid #e0e5ec;\n    background: #ffffff;\n}\n\n.hy-eq-series-label {\n    display: inline-block;\n    margin-bottom: 12px;\n    padding: 5px 9px;\n    border-radius: 3px;\n    background: #edf3ff;\n    color: #1f43a7;\n    font-size: 12px;\n    line-height: 1.3;\n    font-weight: 700;\n}\n\n.hy-eq-series-card p {\n    font-size: 14px;\n}\n\n.hy-eq-series-meta {\n    margin-top: 14px;\n    padding-top: 13px;\n    border-top: 1px solid #e7eaf0;\n}\n\n.hy-eq-series-meta div {\n    margin-top: 5px;\n    color: #5f6772;\n    font-size: 13px;\n    line-height: 1.55;\n}\n\n.hy-eq-series-meta strong {\n    color: #333333;\n}\n\n.hy-eq-link {\n    display: inline-flex;\n    align-items: center;\n    gap: 6px;\n    margin-top: 15px;\n    font-size: 13px;\n    font-weight: 700;\n}\n\n.hy-eq-link::after {\n    content: \"\u2192\";\n    font-weight: 400;\n    transition: transform .2s ease;\n}\n\n.hy-eq-link:hover::after {\n    transform: translateX(3px);\n}\n\n\/* GEOMETRY *\/\n\n.hy-eq-geometry-grid {\n    display: grid;\n    grid-template-columns: repeat(3, minmax(0, 1fr));\n    gap: 0 36px;\n}\n\n.hy-eq-geometry {\n    padding: 20px 0;\n    border-bottom: 1px solid #e4e8ee;\n}\n\n.hy-eq-geometry p {\n    font-size: 14px;\n    line-height: 1.65;\n}\n\n.hy-eq-geometry-tag {\n    display: block;\n    margin-bottom: 7px;\n    color: #93a1b5;\n    font-size: 11px;\n    line-height: 1.2;\n    font-weight: 700;\n    text-transform: uppercase;\n}\n\n\/* DIMENSIONS *\/\n\n.hy-eq-dimension-grid {\n    display: grid;\n    grid-template-columns: .9fr 1.1fr;\n    gap: 32px;\n    align-items: start;\n}\n\n.hy-eq-code-box {\n    padding: 24px;\n    background: #263752;\n    color: #ffffff;\n}\n\n.hy-eq-code-box h3 {\n    color: #ffffff;\n}\n\n.hy-eq-code {\n    display: block;\n    margin: 18px 0 10px;\n    color: #ffffff;\n    font-family: Consolas, Monaco, monospace;\n    font-size: 22px;\n    line-height: 1.4;\n    font-weight: 700;\n}\n\n.hy-eq-code-box p {\n    color: #dfe7f4;\n    font-size: 13px;\n}\n\n.hy-eq-checklist {\n    margin: 0;\n    padding: 0;\n    list-style: none;\n}\n\n.hy-eq-checklist li {\n    position: relative;\n    margin: 0;\n    padding: 12px 0 12px 25px;\n    border-bottom: 1px solid #e4e8ee;\n    color: #5f6772;\n    font-size: 14px;\n    line-height: 1.55;\n}\n\n.hy-eq-checklist li:first-child {\n    border-top: 1px solid #e4e8ee;\n}\n\n.hy-eq-checklist li::before {\n    content: \"\u2713\";\n    position: absolute;\n    left: 2px;\n    top: 12px;\n    color: #1f43a7;\n    font-weight: 700;\n}\n\n.hy-eq-checklist strong {\n    color: #333333;\n}\n\n\/* MODEL COMPARISON *\/\n\n.hy-eq-process {\n    display: grid;\n    grid-template-columns: repeat(4, minmax(0, 1fr));\n    gap: 14px;\n    margin-top: 24px;\n}\n\n.hy-eq-process-item {\n    padding: 20px 18px;\n    border-top: 3px solid #1f43a7;\n    background: #ffffff;\n}\n\n.hy-eq-process-item span {\n    display: block;\n    margin-bottom: 8px;\n    color: #94a2b6;\n    font-size: 12px;\n    font-weight: 700;\n}\n\n.hy-eq-process-item p {\n    font-size: 13px;\n    line-height: 1.6;\n}\n\n\/* FAQ *\/\n\n.hy-eq-faq {\n    margin-top: 24px;\n    border-top: 1px solid #e0e5ec;\n}\n\n.hy-eq-faq details {\n    border-bottom: 1px solid #e0e5ec;\n}\n\n.hy-eq-faq summary {\n    position: relative;\n    padding: 18px 34px 18px 0;\n    color: #333333;\n    font-size: 15px;\n    line-height: 1.5;\n    font-weight: 700;\n    cursor: pointer;\n    list-style: none;\n}\n\n.hy-eq-faq summary::-webkit-details-marker {\n    display: none;\n}\n\n.hy-eq-faq summary::after {\n    content: \"+\";\n    position: absolute;\n    right: 2px;\n    top: 15px;\n    color: #1f43a7;\n    font-size: 22px;\n    font-weight: 400;\n}\n\n.hy-eq-faq details[open] summary::after {\n    content: \"\u2212\";\n}\n\n.hy-eq-faq details p {\n    max-width: 860px;\n    padding: 0 36px 18px 0;\n    font-size: 14px;\n}\n\n\/* RESOURCES *\/\n\n.hy-eq-resources {\n    display: grid;\n    grid-template-columns: repeat(3, minmax(0, 1fr));\n    gap: 16px;\n    margin-top: 24px;\n}\n\n.hy-eq-resource {\n    display: block;\n    padding: 20px;\n    border: 1px solid #dfe5ee;\n    background: #ffffff;\n}\n\n.hy-eq-resource strong {\n    display: block;\n    margin-bottom: 5px;\n    color: #1f43a7;\n    font-size: 14px;\n}\n\n.hy-eq-resource span {\n    display: block;\n    color: #6f7782;\n    font-size: 12px;\n    line-height: 1.55;\n}\n\n\/* FINAL CTA *\/\n\n.hy-eq-cta {\n    padding: 60px 0 66px;\n}\n\n.hy-eq-cta-box {\n    padding: 34px 38px;\n    background: #f1f6ff;\n}\n\n.hy-eq-paths {\n    display: grid;\n    grid-template-columns: repeat(2, minmax(0, 1fr));\n    gap: 18px;\n    margin-top: 24px;\n}\n\n.hy-eq-path {\n    padding: 20px;\n    border: 1px solid #dce5f2;\n    background: #ffffff;\n}\n\n.hy-eq-path p {\n    font-size: 13px;\n}\n\n.hy-eq-data {\n    display: flex;\n    flex-wrap: wrap;\n    gap: 7px;\n    margin-top: 13px;\n}\n\n.hy-eq-data span {\n    display: inline-block;\n    padding: 5px 8px;\n    border-radius: 3px;\n    background: #edf3ff;\n    color: #47556c;\n    font-size: 11px;\n    line-height: 1.35;\n    font-weight: 700;\n}\n\n.hy-eq-actions {\n    display: flex;\n    flex-wrap: wrap;\n    gap: 10px;\n    margin-top: 24px;\n}\n\n.hy-eq-button,\n.hy-eq-button-outline {\n    display: inline-flex;\n    align-items: center;\n    justify-content: center;\n    min-height: 42px;\n    padding: 10px 18px;\n    border-radius: 4px;\n    font-size: 13px;\n    font-weight: 700;\n}\n\n.hy-eq-button {\n    border: 1px solid #1f43a7;\n    background: #1f43a7;\n    color: #ffffff !important;\n}\n\n.hy-eq-button:hover {\n    background: #17378c;\n}\n\n.hy-eq-button-outline {\n    border: 1px solid #1f43a7;\n    background: #ffffff;\n    color: #1f43a7 !important;\n}\n\n.hy-eq-button-outline:hover {\n    background: #edf3ff;\n}\n\n\/* TABLET *\/\n\n@media (max-width: 900px) {\n    .hy-eq-steps,\n    .hy-eq-process {\n        grid-template-columns: repeat(2, minmax(0, 1fr));\n    }\n\n    .hy-eq-geometry-grid {\n        grid-template-columns: repeat(2, minmax(0, 1fr));\n    }\n\n    .hy-eq-resources {\n        grid-template-columns: 1fr;\n    }\n}\n\n\/* MOBILE *\/\n\n@media (max-width: 680px) {\n    .hy-eq-container {\n        padding-left: 14px;\n        padding-right: 14px;\n    }\n\n    .hy-eq-section {\n        padding: 44px 0;\n    }\n\n    .hy-eq-hero {\n        padding: 18px 0 36px;\n    }\n\n    .hy-eq h2 {\n        font-size: 23px;\n    }\n\n    .hy-eq-lead {\n        font-size: 15px !important;\n    }\n\n    .hy-eq-steps,\n    .hy-eq-series-grid,\n    .hy-eq-geometry-grid,\n    .hy-eq-dimension-grid,\n    .hy-eq-process,\n    .hy-eq-paths {\n        grid-template-columns: 1fr;\n    }\n\n    .hy-eq-table {\n        min-width: 820px;\n    }\n\n    .hy-eq-scroll-hint {\n        display: block;\n    }\n\n    .hy-eq-quick-cta {\n        grid-template-columns: 1fr;\n        gap: 16px;\n        padding: 20px;\n    }\n\n    .hy-eq-quick-cta a {\n        width: 100%;\n        white-space: normal;\n        text-align: center;\n    }\n\n    .hy-eq-code {\n        font-size: 19px;\n    }\n\n    .hy-eq-cta {\n        padding: 48px 0 52px;\n    }\n\n    .hy-eq-cta-box {\n        padding: 26px 20px;\n    }\n\n    .hy-eq-actions a {\n        width: 100%;\n    }\n}\n<\/style>\n\n<article class=\"hy-eq\">\n\n    <!-- The WordPress theme provides the page H1. -->\n\n    <section class=\"hy-eq-hero\">\n        <div class=\"hy-eq-container\">\n            <div class=\"hy-eq-reading\">\n\n                <p class=\"hy-eq-kicker\">\n                    HY Tools Product Selection Resource\n                <\/p>\n\n                <p class=\"hy-eq-lead\">\n                    This guide helps you compare\n                    our current HRC45, HRC55, HRC65 and aluminum solid carbide end mill\n                    options before checking a specific model and size. Start with the\n                    workpiece material, then select the cutting geometry by operation and\n                    confirm the dimensions needed for the actual feature.\n                <\/p>\n\n                <div class=\"hy-eq-scope\">\n                    <p>\n                        <strong>Scope of this guide:<\/strong> HRC45, HRC55 and HRC65 are\n                        HY Tools product-series labels used to organize typical starting\n                        choices. They are not universal carbide-grade or coating standards.\n                        Final selection also depends on material grade, hardness, cutting\n                        engagement, reach, coolant and machine rigidity.\n                    <\/p>\n                    <a href=\"https:\/\/hycuttingtools.com\/solid-carbide-end-mill-selection-guide\/\">\n                        Read the complete technical selection guide \u2192\n                    <\/a>\n                <\/div>\n\n                <nav class=\"hy-eq-jump\" aria-label=\"Guide sections\">\n                    <a href=\"#quick-selection\">Quick Selection<\/a>\n                    <a href=\"#series\">HY Tools Series<\/a>\n                    <a href=\"#operation\">Tool Geometry<\/a>\n                    <a href=\"#dimensions\">Dimensions<\/a>\n                    <a href=\"#coatings\">Coating Options<\/a>\n                    <a href=\"#model-comparison\">Model Comparison<\/a>\n                    <a href=\"#faq\">FAQ<\/a>\n                <\/nav>\n\n            <\/div>\n        <\/div>\n    <\/section>\n\n\n    <!-- QUICK SELECTION -->\n\n    <section class=\"hy-eq-section hy-eq-soft\" id=\"quick-selection\">\n        <div class=\"hy-eq-container\">\n\n            <div class=\"hy-eq-reading\">\n                <h2>Quick HY Tools End Mill Series Selection<\/h2>\n                <p class=\"hy-eq-intro\">\n                    Use the four steps below to narrow the product range. The table provides\n                    a starting direction for product review; it does not confirm final\n                    suitability or direct equivalence with another manufacturer\u2019s tool.\n                <\/p>\n            <\/div>\n\n            <div class=\"hy-eq-steps\" aria-label=\"Four-step end mill selection process\">\n                <div class=\"hy-eq-step\">\n                    <span class=\"hy-eq-step-no\">STEP 01<\/span>\n                    <strong>Define the material<\/strong>\n                    <span>Material grade and hardness, if known.<\/span>\n                <\/div>\n                <div class=\"hy-eq-step\">\n                    <span class=\"hy-eq-step-no\">STEP 02<\/span>\n                    <strong>Define the operation<\/strong>\n                    <span>Slotting, side milling, roughing, finishing or 3D profiling.<\/span>\n                <\/div>\n                <div class=\"hy-eq-step\">\n                    <span class=\"hy-eq-step-no\">STEP 03<\/span>\n                    <strong>Confirm dimensions<\/strong>\n                    <span>Diameter, cutting length, shank, overall length and radius.<\/span>\n                <\/div>\n                <div class=\"hy-eq-step\">\n                    <span class=\"hy-eq-step-no\">STEP 04<\/span>\n                    <strong>Review the model<\/strong>\n                    <span>Check the exact geometry, coating and application before testing.<\/span>\n                <\/div>\n            <\/div>\n\n            <div class=\"hy-eq-table-wrap\">\n                <table class=\"hy-eq-table\">\n                    <caption class=\"hy-eq-sr-only\">\n                        HY Tools end mill series starting selection by workpiece material\n                    <\/caption>\n                    <thead>\n                        <tr>\n                            <th>Workpiece Material<\/th>\n                            <th>HY Tools Starting Direction<\/th>\n                            <th>Common Tool Starting Point<\/th>\n                            <th>Key Details to Confirm<\/th>\n                        <\/tr>\n                    <\/thead>\n                    <tbody>\n                        <tr>\n                            <td>General Steel &amp; Alloy Steel<\/td>\n                            <td>HRC45 or HRC55 series, depending on the material and production requirement<\/td>\n                            <td>4-flute square or corner-radius geometry for suitable side milling, shoulders and general machining<\/td>\n                            <td>Grade \u00b7 hardness \u00b7 slotting or side milling<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Mold Steel &amp; Pre-Hardened Steel<\/td>\n                            <td>HRC55 series as a common candidate; review HRC65 options when the actual hardness and conditions require it<\/td>\n                            <td>Square, corner radius or ball nose according to the machined feature<\/td>\n                            <td>Hardness \u00b7 roughing or finishing \u00b7 required reach<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Higher-Hardness Steel<\/td>\n                            <td>HRC65 series as a candidate for application review<\/td>\n                            <td>Square or ball nose geometry selected by the feature and finishing strategy<\/td>\n                            <td>Measured HRC \u00b7 tool overhang \u00b7 machine rigidity<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Stainless Steel<\/td>\n                            <td>Application-specific coated series after the stainless grade and operation are confirmed<\/td>\n                            <td>Geometry chosen for edge support, chip control and actual engagement<\/td>\n                            <td>Stainless grade \u00b7 cutting engagement \u00b7 coolant<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Aluminum &amp; Suitable Non-Ferrous Materials<\/td>\n                            <td>HY Tools aluminum series with polished, uncoated or DLC options by model<\/td>\n                            <td>2-flute or 3-flute aluminum geometry with suitable chip space<\/td>\n                            <td>Alloy grade \u00b7 slotting or side milling \u00b7 surface finish<\/td>\n                        <\/tr>\n                    <\/tbody>\n                <\/table>\n            <\/div>\n\n            <p class=\"hy-eq-scroll-hint\">Swipe horizontally to compare \u2192<\/p>\n\n            <div class=\"hy-eq-note\">\n                <p>\n                    <strong>Important:<\/strong> Do not choose a series from workpiece\n                    hardness alone. Two customers machining material at the same hardness\n                    may still require different flute forms, edge preparation, coating,\n                    cutting length or tool reach.\n                <\/p>\n            <\/div>\n\n            <div class=\"hy-eq-quick-cta\">\n                <div>\n                    <strong>Already have a current tool or customer model?<\/strong>\n                    <p>\n                        A brand and model code, catalog page, drawing or clear product\n                        photos are enough to begin an initial comparison.\n                    <\/p>\n                <\/div>\n                <a href=\"https:\/\/hycuttingtools.com\/contact\/\">\n                    Request a Model Comparison\n                <\/a>\n            <\/div>\n\n        <\/div>\n    <\/section>\n\n\n    <!-- SERIES -->\n\n    <section class=\"hy-eq-section\" id=\"series\">\n        <div class=\"hy-eq-container\">\n\n            <div class=\"hy-eq-reading\">\n                <h2>Compare the HY Tools End Mill Series<\/h2>\n                <p class=\"hy-eq-intro\">\n                    The HY Tools end mill series labels provide a convenient way to\n                    organize current products, but each linked model still needs to be\n                    checked for its geometry, dimensions, carbide substrate and coating.\n                <\/p>\n            <\/div>\n\n            <div class=\"hy-eq-series-grid\">\n\n                <div class=\"hy-eq-series-card\">\n                    <span class=\"hy-eq-series-label\">HRC45 SERIES<\/span>\n                    <h3>General Steel Starting Range<\/h3>\n                    <p>\n                        A practical starting range for suitable general steel applications\n                        and less demanding machining conditions. Select the tool type by\n                        operation rather than using the series label alone.\n                    <\/p>\n                    <div class=\"hy-eq-series-meta\">\n                        <div><strong>Typical direction:<\/strong> Square, ball nose or corner-radius options by model<\/div>\n                        <div><strong>Representative coating:<\/strong> Selected models may use AlTiN; confirm the exact product<\/div>\n                        <div><strong>Check first:<\/strong> Steel grade, hardness, operation and cutting depth<\/div>\n                    <\/div>\n                    <a class=\"hy-eq-link\" href=\"https:\/\/hycuttingtools.com\/product\/hrc45-hrc55-4-flute-solid-carbide-square-end-mill-for-steel\/\">\n                        View HRC45 \/ HRC55 Steel Option\n                    <\/a>\n                <\/div>\n\n                <div class=\"hy-eq-series-card\">\n                    <span class=\"hy-eq-series-label\">HRC55 SERIES<\/span>\n                    <h3>Steel, Alloy Steel &amp; Mold Steel Range<\/h3>\n                    <p>\n                        A common production starting range for steel, alloy steel and\n                        suitable mold-steel applications where wear resistance and stable\n                        cutting are important.\n                    <\/p>\n                    <div class=\"hy-eq-series-meta\">\n                        <div><strong>Typical direction:<\/strong> Square, roughing, ball nose and corner-radius options by model<\/div>\n                        <div><strong>Representative coating:<\/strong> Selected standard models may use TiSiN; other coatings depend on geometry and specification<\/div>\n                        <div><strong>Check first:<\/strong> Material hardness, roughing\/finishing and coolant condition<\/div>\n                    <\/div>\n                    <a class=\"hy-eq-link\" href=\"https:\/\/hycuttingtools.com\/product\/hrc45-hrc55-4-flute-solid-carbide-square-end-mill-for-steel\/\">\n                        View HRC45 \/ HRC55 Square End Mill\n                    <\/a>\n                <\/div>\n\n                <div class=\"hy-eq-series-card\">\n                    <span class=\"hy-eq-series-label\">HRC65 SERIES<\/span>\n                    <h3>Higher-Hardness Steel Candidate Range<\/h3>\n                    <p>\n                        A candidate range for higher-hardness and hardened-steel\n                        applications after the actual hardness, operation, engagement and\n                        setup rigidity have been reviewed.\n                    <\/p>\n                    <div class=\"hy-eq-series-meta\">\n                        <div><strong>Typical direction:<\/strong> Square and ball nose options selected by the machined feature<\/div>\n                        <div><strong>Representative coating:<\/strong> Selected models may use AlTiSiN or Nano Blue configurations<\/div>\n                        <div><strong>Check first:<\/strong> Measured hardness, overhang, holder runout and finishing strategy<\/div>\n                    <\/div>\n                    <a class=\"hy-eq-link\" href=\"https:\/\/hycuttingtools.com\/product\/hrc65-4-flute-solid-carbide-square-end-mill-for-hardened-steel\/\">\n                        View HRC65 Square End Mill\n                    <\/a>\n                <\/div>\n\n                <div class=\"hy-eq-series-card\">\n                    <span class=\"hy-eq-series-label\">ALUMINUM SERIES<\/span>\n                    <h3>Aluminum &amp; Non-Ferrous Range<\/h3>\n                    <p>\n                        Aluminum-specific tools prioritize chip evacuation, a sharp edge\n                        and low material adhesion. The correct flute count still depends on\n                        chip volume and cutting engagement.\n                    <\/p>\n                    <div class=\"hy-eq-series-meta\">\n                        <div><strong>Typical direction:<\/strong> 2-flute or 3-flute aluminum geometry<\/div>\n                        <div><strong>Representative finish:<\/strong> Polished, uncoated or DLC-coated options by model<\/div>\n                        <div><strong>Check first:<\/strong> Aluminum grade, slotting\/side milling, coolant and finish requirement<\/div>\n                    <\/div>\n                    <a class=\"hy-eq-link\" href=\"https:\/\/hycuttingtools.com\/solid-carbide-end-mills\/end-mills-for-aluminum\/\">\n                        View Aluminum End Mills\n                    <\/a>\n                <\/div>\n\n            <\/div>\n        <\/div>\n    <\/section>\n\n\n    <!-- OPERATION -->\n\n    <section class=\"hy-eq-section hy-eq-soft\" id=\"operation\">\n        <div class=\"hy-eq-container\">\n\n            <div class=\"hy-eq-reading\">\n                <h2>Choose the Tool Geometry by Operation<\/h2>\n                <p class=\"hy-eq-intro\">\n                    After narrowing the product series by workpiece material, select the\n                    cutting geometry according to the feature and operation. Tool shape\n                    should not be determined from the HRC series label.\n                <\/p>\n            <\/div>\n\n            <div class=\"hy-eq-geometry-grid\">\n                <div class=\"hy-eq-geometry\">\n                    <span class=\"hy-eq-geometry-tag\">Flat Features<\/span>\n                    <h3>Square End Mill<\/h3>\n                    <p>\n                        A common starting geometry for flat-bottom pockets, shoulders,\n                        profiles and suitable slotting or side-milling operations.\n                        Full-slot and light-radial cuts should be reviewed separately.\n                    <\/p>\n                <\/div>\n\n                <div class=\"hy-eq-geometry\">\n                    <span class=\"hy-eq-geometry-tag\">3D Surfaces<\/span>\n                    <h3>Ball Nose End Mill<\/h3>\n                    <p>\n                        Used for curved surfaces, cavities, dies, molds and 3D contouring.\n                        Confirm the ball radius, reach and finishing step-over.\n                    <\/p>\n                <\/div>\n\n                <div class=\"hy-eq-geometry\">\n                    <span class=\"hy-eq-geometry-tag\">Supported Corner<\/span>\n                    <h3>Corner-Radius End Mill<\/h3>\n                    <p>\n                        The radius can provide more edge support than a sharp square\n                        corner, but it must match the permitted internal corner geometry\n                        of the workpiece.\n                    <\/p>\n                <\/div>\n\n                <div class=\"hy-eq-geometry\">\n                    <span class=\"hy-eq-geometry-tag\">Material Removal<\/span>\n                    <h3>Roughing End Mill<\/h3>\n                    <p>\n                        Consider a serrated roughing geometry when material-removal\n                        efficiency and chip segmentation are priorities. A separate\n                        finishing operation may still be required.\n                    <\/p>\n                <\/div>\n\n                <div class=\"hy-eq-geometry\">\n                    <span class=\"hy-eq-geometry-tag\">Clearance &amp; Reach<\/span>\n                    <h3>Long-Neck End Mill<\/h3>\n                    <p>\n                        Used where the cutting edge must reach below surrounding features.\n                        Select only the neck and projection required because additional\n                        reach increases deflection risk.\n                    <\/p>\n                <\/div>\n\n                <div class=\"hy-eq-geometry\">\n                    <span class=\"hy-eq-geometry-tag\">Small Features<\/span>\n                    <h3>Micro End Mill<\/h3>\n                    <p>\n                        Suitable for small-diameter features where runout, holder quality,\n                        spindle condition, cutting depth and handling become especially\n                        important.\n                    <\/p>\n                <\/div>\n            <\/div>\n\n            <a class=\"hy-eq-link\" href=\"https:\/\/hycuttingtools.com\/solid-carbide-end-mills\/\">\n                View All Solid Carbide End Mills\n            <\/a>\n\n        <\/div>\n    <\/section>\n\n\n    <!-- DIMENSIONS -->\n\n    <section class=\"hy-eq-section\" id=\"dimensions\">\n        <div class=\"hy-eq-container\">\n\n            <div class=\"hy-eq-reading\">\n                <h2>Confirm Dimensions, Radius and Tool Reach<\/h2>\n                <p class=\"hy-eq-intro\">\n                    Once the series and tool geometry are identified, confirm the actual\n                    dimensions. A model cannot be matched reliably from cutting diameter\n                    and flute count alone.\n                <\/p>\n            <\/div>\n\n            <div class=\"hy-eq-dimension-grid\">\n                <div class=\"hy-eq-code-box\">\n                    <h3>Example Size Description<\/h3>\n                    <span class=\"hy-eq-code\">\u00d88 \u00d7 20 \u00d7 \u00d88 \u00d7 60 mm<\/span>\n                    <p>\n                        Cutting diameter \u00d7 cutting length \u00d7 shank diameter \u00d7 overall length\n                    <\/p>\n                <\/div>\n\n                <ul class=\"hy-eq-checklist\">\n                    <li><strong>Cutting diameter:<\/strong> Confirm the required feature size and tolerance.<\/li>\n                    <li><strong>Cutting length:<\/strong> Use only the flute length required for the actual cutting depth.<\/li>\n                    <li><strong>Shank diameter:<\/strong> Check compatibility with the holder and collet.<\/li>\n                    <li><strong>Overall length:<\/strong> Additional length should only be selected when reach requires it.<\/li>\n                    <li><strong>Corner or ball radius:<\/strong> Match the part geometry and drawing requirement.<\/li>\n                    <li><strong>Neck length and diameter:<\/strong> Confirm clearance for ribs, walls and deep cavities.<\/li>\n                <\/ul>\n            <\/div>\n\n            <div class=\"hy-eq-note\">\n                <p>\n                    Two tools marked <strong>\u00d88 \u00d7 20 \u00d7 \u00d88 \u00d7 60 mm<\/strong> may still\n                    differ in flute profile, core design, corner geometry, neck clearance,\n                    tolerance, substrate, coating and intended application. Treat a\n                    possible replacement as a candidate for comparison and testing.\n                <\/p>\n            <\/div>\n\n        <\/div>\n    <\/section>\n\n\n    <!-- COATINGS -->\n\n    <section class=\"hy-eq-section hy-eq-blue\" id=\"coatings\">\n        <div class=\"hy-eq-container\">\n\n            <div class=\"hy-eq-reading\">\n                <h2>Typical HY Tools Coating and Finish Options<\/h2>\n                <p class=\"hy-eq-intro\">\n                    The options below describe representative HY Tools configurations.\n                    Actual coating depends on the specific product model and application.\n                    Do not identify a coating from tool color or an HRC label alone.\n                <\/p>\n            <\/div>\n\n            <div class=\"hy-eq-table-wrap\">\n                <table class=\"hy-eq-table\">\n                    <caption class=\"hy-eq-sr-only\">\n                        Representative HY Tools end mill coatings and finishes\n                    <\/caption>\n                    <thead>\n                        <tr>\n                            <th>Coating \/ Finish<\/th>\n                            <th>Representative HY Tools Use<\/th>\n                            <th>Selection Boundary<\/th>\n                        <\/tr>\n                    <\/thead>\n                    <tbody>\n                        <tr>\n                            <td>AlTiN<\/td>\n                            <td>Selected general-steel and HRC45-series product configurations<\/td>\n                            <td>Confirm the exact model, operation, cutting temperature and coolant condition<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>TiSiN<\/td>\n                            <td>Selected HRC55 steel and mold-steel product configurations<\/td>\n                            <td>Not every HRC55 tool uses the same coating; geometry-specific products may differ<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>TiAlN<\/td>\n                            <td>Selected steel, stainless-steel or higher-temperature cutting configurations<\/td>\n                            <td>Confirm the product specification rather than identifying the coating from color<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>AlTiSiN \/ Nano Blue<\/td>\n                            <td>Selected HRC65 and higher-hardness product configurations<\/td>\n                            <td>Nano Blue is a product-series description; confirm the actual coating specification by model<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Polished \/ Uncoated<\/td>\n                            <td>Selected aluminum, copper and suitable non-ferrous end mills<\/td>\n                            <td>Flute geometry, chip space, alloy grade and coolant remain essential<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>DLC<\/td>\n                            <td>Low-friction option for selected aluminum, copper and suitable non-ferrous applications<\/td>\n                            <td>Confirm compatibility with the exact material, operation and cutting conditions<\/td>\n                        <\/tr>\n                    <\/tbody>\n                <\/table>\n            <\/div>\n\n            <p class=\"hy-eq-scroll-hint\">Swipe horizontally to compare \u2192<\/p>\n\n            <div class=\"hy-eq-note\">\n                <p>\n                    Coating supports wear and heat management, but it cannot correct an\n                    unsuitable flute form, weak edge design, excessive overhang or poor\n                    chip evacuation. Coating suppliers also use different compositions,\n                    layer structures and trade names. For a broader technical reference,\n                    review the\n                    <a href=\"https:\/\/www.oerlikon.com\/balzers\/global\/en\/portfolio\/equipment\/metaplasdomino\/metaplas-domino-coatings\/\" target=\"_blank\" rel=\"noopener\">\n                        Oerlikon Balzers coating portfolio\n                    <\/a>.\n                <\/p>\n            <\/div>\n\n        <\/div>\n    <\/section>\n\n\n    <!-- MODEL COMPARISON -->\n\n    <section class=\"hy-eq-section hy-eq-soft\" id=\"model-comparison\">\n        <div class=\"hy-eq-container\">\n\n            <div class=\"hy-eq-reading\">\n                <h2>Compare an Existing End Mill Model<\/h2>\n                <p class=\"hy-eq-intro\">\n                    Distributors and buyers do not need to reconstruct every machining\n                    parameter before contacting HY Tools. Current model information can be\n                    used to begin the review, but final equivalence should not be confirmed\n                    from appearance or dimensions alone.\n                <\/p>\n            <\/div>\n\n            <div class=\"hy-eq-process\">\n                <div class=\"hy-eq-process-item\">\n                    <span>01 \u00b7 IDENTIFY<\/span>\n                    <p>Send the current brand, full model code, package label or catalog page.<\/p>\n                <\/div>\n                <div class=\"hy-eq-process-item\">\n                    <span>02 \u00b7 COMPARE<\/span>\n                    <p>Review diameter, cutting length, shank, overall length, radius and neck.<\/p>\n                <\/div>\n                <div class=\"hy-eq-process-item\">\n                    <span>03 \u00b7 CONFIRM<\/span>\n                    <p>Check material, hardness, operation, engagement, coolant, reach and quantity.<\/p>\n                <\/div>\n                <div class=\"hy-eq-process-item\">\n                    <span>04 \u00b7 TEST<\/span>\n                    <p>Approve a candidate through controlled testing of accuracy, finish, stability and wear.<\/p>\n                <\/div>\n            <\/div>\n\n            <div class=\"hy-eq-note\">\n                <p>\n                    <strong>For replacement requests:<\/strong> A current model, drawing,\n                    catalog page or clear tool photos are enough for an initial dimensional\n                    review. Sample approval is still required before treating the candidate\n                    as a production replacement.\n                <\/p>\n            <\/div>\n\n        <\/div>\n    <\/section>\n\n\n    <!-- FAQ -->\n\n    <section class=\"hy-eq-section\" id=\"faq\">\n        <div class=\"hy-eq-container\">\n\n            <div class=\"hy-eq-reading\">\n                <h2>Frequently Asked Questions<\/h2>\n                <p class=\"hy-eq-intro\">\n                    These answers clarify how to use the HY Tools end mill series guide\n                    when only partial application or product information is available.\n                <\/p>\n            <\/div>\n\n            <div class=\"hy-eq-faq\">\n                <details>\n                    <summary>Are HRC45, HRC55 and HRC65 universal carbide grades?<\/summary>\n                    <p>\n                        No. In this guide they are HY Tools product-series labels that help\n                        organize typical starting choices. They do not define a universal\n                        carbide substrate, coating or guaranteed limit across manufacturers.\n                    <\/p>\n                <\/details>\n\n                <details>\n                    <summary>Can I identify the coating from its color?<\/summary>\n                    <p>\n                        No. Similar-looking tools may use different coating compositions,\n                        layer structures or substrates. Confirm the product model and\n                        specification rather than relying on color.\n                    <\/p>\n                <\/details>\n\n                <details>\n                    <summary>Can HY Tools review a request if I only have a model code or photo?<\/summary>\n                    <p>\n                        Yes. A model code, package label, catalog page, drawing or clear\n                        product photos can begin the comparison. Material, operation and\n                        other missing details can then be confirmed before sample testing.\n                    <\/p>\n                <\/details>\n\n                <details>\n                    <summary>Are two end mills with the same dimensions equivalent?<\/summary>\n                    <p>\n                        Not necessarily. Flute profile, helix, core design, edge preparation,\n                        radius, neck clearance, tolerance, substrate and coating may still\n                        differ even when the marked dimensions are identical.\n                    <\/p>\n                <\/details>\n\n                <details>\n                    <summary>Does selecting an HRC65 series tool guarantee performance in HRC65 material?<\/summary>\n                    <p>\n                        No. The actual result also depends on the specific tool model,\n                        workpiece grade and measured hardness, operation, engagement,\n                        machine rigidity, holder runout, coolant and cutting parameters.\n                    <\/p>\n                <\/details>\n            <\/div>\n\n        <\/div>\n    <\/section>\n\n\n    <!-- RELATED RESOURCES -->\n\n    <section class=\"hy-eq-section hy-eq-soft\">\n        <div class=\"hy-eq-container\">\n\n            <div class=\"hy-eq-reading\">\n                <h2>Continue the Selection Process<\/h2>\n                <p class=\"hy-eq-intro\">\n                    Use these resources after identifying a suitable HY Tools product\n                    direction.\n                <\/p>\n            <\/div>\n\n            <div class=\"hy-eq-resources\">\n                <a class=\"hy-eq-resource\" href=\"https:\/\/hycuttingtools.com\/solid-carbide-end-mill-selection-guide\/\">\n                    <strong>Technical End Mill Selection Guide<\/strong>\n                    <span>Review material, operation, flute count, geometry, rigidity and sample approval.<\/span>\n                <\/a>\n                <a class=\"hy-eq-resource\" href=\"https:\/\/hycuttingtools.com\/resources\/speeds-feeds\/\">\n                    <strong>Starting Speeds &amp; Feeds<\/strong>\n                    <span>Continue to starting cutting data after the exact tool model is selected.<\/span>\n                <\/a>\n                <a class=\"hy-eq-resource\" href=\"https:\/\/hycuttingtools.com\/solid-carbide-end-mills\/\">\n                    <strong>Solid Carbide End Mill Range<\/strong>\n                    <span>Browse representative square, ball nose, corner-radius, aluminum and special tools.<\/span>\n                <\/a>\n            <\/div>\n\n        <\/div>\n    <\/section>\n\n\n    <!-- FINAL CTA -->\n\n    <section class=\"hy-eq-cta\">\n        <div class=\"hy-eq-container\">\n            <div class=\"hy-eq-cta-box\">\n\n                <h2>Choose a Starting Series or Compare a Current Model<\/h2>\n                <p>\n                    Send the information available to you. HY Tools can review a new\n                    application, a current product model or a customer tool list before\n                    confirming a candidate specification for quotation or testing.\n                <\/p>\n\n                <div class=\"hy-eq-paths\">\n                    <div class=\"hy-eq-path\">\n                        <h3>New Application<\/h3>\n                        <p>Use this path when the tool will be selected from machining conditions.<\/p>\n                        <div class=\"hy-eq-data\">\n                            <span>Material &amp; Hardness<\/span>\n                            <span>Operation<\/span>\n                            <span>Dimensions<\/span>\n                            <span>Cutting Depth<\/span>\n                            <span>Required Reach<\/span>\n                            <span>Quantity<\/span>\n                        <\/div>\n                    <\/div>\n\n                    <div class=\"hy-eq-path\">\n                        <h3>Existing Tool or Replacement<\/h3>\n                        <p>Use this path when the customer already has a current tool or reference model.<\/p>\n                        <div class=\"hy-eq-data\">\n                            <span>Brand &amp; Model<\/span>\n                            <span>Catalog Page<\/span>\n                            <span>Drawing<\/span>\n                            <span>Product Photos<\/span>\n                            <span>Current Problem<\/span>\n                            <span>Quantity<\/span>\n                        <\/div>\n                    <\/div>\n                <\/div>\n\n                <div class=\"hy-eq-actions\">\n                    <a class=\"hy-eq-button\" href=\"https:\/\/hycuttingtools.com\/contact\/\">\n                        Request a Product Match\n                    <\/a>\n                    <a class=\"hy-eq-button-outline\" href=\"https:\/\/wa.me\/8619042904292\" target=\"_blank\" rel=\"noopener\">\n                        Send Your Tool List on WhatsApp\n                    <\/a>\n                <\/div>\n\n            <\/div>\n        <\/div>\n    <\/section>\n\n<\/article>\n","protected":false},"excerpt":{"rendered":"<p>HY Tools Product Selection Resource This guide helps you compare our current HRC45, HRC55, HRC65&#8230;<\/p>","protected":false},"author":1,"featured_media":8206,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"googlesitekit_rrm_CAowkrPfCw:productID":"","_kad_blocks_custom_css":"","_kad_blocks_head_custom_js":"","_kad_blocks_body_custom_js":"","_kad_blocks_footer_custom_js":"","_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":""},"categories":[5003],"tags":[3551,3614,5020],"class_list":["post-8203","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-tool-selection-guides","tag-carbide-end-mill","tag-end-mill-selection","tag-end-mill-selection-guide"],"taxonomy_info":{"category":[{"value":5003,"label":"Tool Selection Guides"}],"post_tag":[{"value":3551,"label":"carbide end mill"},{"value":3614,"label":"end mill selection"},{"value":5020,"label":"end mill selection guide"}]},"featured_image_src_large":["https:\/\/hycuttingtools.com\/wp-content\/uploads\/2026\/08\/HY-end-mill-quick-selection-guide-1024x537.webp",1024,537,true],"author_info":{"display_name":"HY Cutting Tools","author_link":"https:\/\/hycuttingtools.com\/it\/author\/1010616998qq-com\/"},"comment_info":0,"category_info":[{"term_id":5003,"name":"Tool Selection Guides","slug":"tool-selection-guides","term_group":0,"term_taxonomy_id":5003,"taxonomy":"category","description":"","parent":0,"count":16,"filter":"raw","cat_ID":5003,"category_count":16,"category_description":"","cat_name":"Tool Selection Guides","category_nicename":"tool-selection-guides","category_parent":0}],"tag_info":[{"term_id":3551,"name":"carbide end mill","slug":"carbide-end-mill","term_group":0,"term_taxonomy_id":3551,"taxonomy":"post_tag","description":"","parent":0,"count":7,"filter":"raw"},{"term_id":3614,"name":"end mill selection","slug":"end-mill-selection","term_group":0,"term_taxonomy_id":3614,"taxonomy":"post_tag","description":"","parent":0,"count":3,"filter":"raw"},{"term_id":5020,"name":"end mill selection guide","slug":"end-mill-selection-guide","term_group":0,"term_taxonomy_id":5020,"taxonomy":"post_tag","description":"","parent":0,"count":3,"filter":"raw"}],"_links":{"self":[{"href":"https:\/\/hycuttingtools.com\/it\/wp-json\/wp\/v2\/posts\/8203","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/hycuttingtools.com\/it\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/hycuttingtools.com\/it\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/hycuttingtools.com\/it\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/hycuttingtools.com\/it\/wp-json\/wp\/v2\/comments?post=8203"}],"version-history":[{"count":2,"href":"https:\/\/hycuttingtools.com\/it\/wp-json\/wp\/v2\/posts\/8203\/revisions"}],"predecessor-version":[{"id":9088,"href":"https:\/\/hycuttingtools.com\/it\/wp-json\/wp\/v2\/posts\/8203\/revisions\/9088"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/hycuttingtools.com\/it\/wp-json\/wp\/v2\/media\/8206"}],"wp:attachment":[{"href":"https:\/\/hycuttingtools.com\/it\/wp-json\/wp\/v2\/media?parent=8203"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/hycuttingtools.com\/it\/wp-json\/wp\/v2\/categories?post=8203"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/hycuttingtools.com\/it\/wp-json\/wp\/v2\/tags?post=8203"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}