{"id":1502,"date":"2025-12-26T05:27:43","date_gmt":"2025-12-26T05:27:43","guid":{"rendered":"https:\/\/hycuttingtools.com\/?post_type=product&p=1502"},"modified":"2026-09-30T07:16:36","modified_gmt":"2026-09-30T07:16:36","slug":"lnmu-enmu-blmp-high-feed-milling-inserts","status":"publish","type":"product","link":"https:\/\/hycuttingtools.com\/ar\/%d8%a7%d9%84%d9%85%d9%86%d8%aa%d8%ac\/lnmu-enmu-blmp-high-feed-milling-inserts\/","title":{"rendered":"LNMU\/ENMU\/BLMP Double-Sided High-Feed Carbide Milling Inserts"},"content":{"rendered":"
\n

<\/p>\n

\n
\n

\u25c6<\/span>\u0646\u0638\u0631\u0629 \u0639\u0627\u0645\u0629 \u0639\u0644\u0649 \u0627\u0644\u0645\u0646\u062a\u062c<\/h2>\n
<\/div>\n<\/div>\n

LNMU0303, ENMU0603ER and BLMP0904R are three insert families offered on this page for double-sided, indexable high-feed milling. They are intended for productive roughing with a compatible high-feed cutter, where a small entering angle permits a relatively high feed per tooth at a controlled axial depth of cut. Each family requires its own matching cutter pocket and application data.<\/p>\n

Choose the complete insert code by workpiece material, cutter body, geometry, carbide grade and coating. The supplied description mentions micro-grain carbide and PVD coating, but does not identify a grade or coating for every model. The number of usable edges and the allowable tool path must also be confirmed for the selected insert and cutter.<\/p>\n<\/section>\n

<\/p>\n

\n
\n

\u25c6<\/span>Key Configuration<\/h2>\n
<\/div>\n<\/div>\n
\n
\n

Three Insert Families<\/h3>\n

LNMU0303, ENMU0603ER and BLMP0904R are distinct designations. Match the complete insert model to the approved cutter-body code and pocket drawing.<\/p>\n<\/div>\n

\n

High-Feed Geometry<\/h3>\n

The selected insert and cutter control chip thinning, allowable axial depth and effective cutting diameter. Apply feed recommendations for the actual cutter assembly.<\/p>\n<\/div>\n

\n

Grade & Edge Count<\/h3>\n

Confirm the specified carbide grade, coating, chipbreaker and usable edges per insert. These values cannot be established from the three family names alone.<\/p>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n
\n

\u25c6<\/span>Applications & Selection<\/h2>\n
<\/div>\n<\/div>\n

High-feed face milling and cavity roughing are application starting points. Steel (ISO P), stainless steel (ISO M), cast iron (ISO K), tool steel or harder materials require the corresponding supplier-approved grade and cutting data. Ramping, helical entry, plunging and full-width slotting depend on the particular cutter body’s published limits.<\/p>\n

Selection note:<\/strong> Provide the cutter-body model, workpiece grade and hardness, operation, axial and radial engagement, coolant method and target finish. Confirm the complete insert designation before setting feed per tooth or ordering a replacement.<\/div>\n<\/section>\n

<\/p>\n

\n
\n

\u25c6<\/span>Product Images<\/h2>\n
<\/div>\n<\/div>\n
\n

 <\/p>\n<\/div>\n

\"LNMU